Details, datasheet, quote on part number: M28C16-150K6
DescriptionIc-sm-16k CMOS EePROM
DatasheetDownload M28C16-150K6 datasheet
Find where to buy


Features, Applications

FAST ACCESS TIME: 90ns SINGLE 10% SUPPLY VOLTAGE LOW POWER CONSUMPTION FAST WRITE CYCLE: 64 Bytes Page Write Operation Byte or Page Write Cycle: 3ms Max ENHANCED END OF WRITE DETECTION: Data Polling Toggle Bit PAGE LOAD TIMER STATUS BIT HIGH RELIABILITY SINGLE POLYSILICON, CMOS TECHNOLOGY: Endurance >100,000 Erase/Write Cycles Data Retention >40 Years JEDEC APPROVED BYTEWIDE PIN OUT SOFTWARE DATA PROTECTION M28C16 is replaced by the products described on the document M28C16A DESCRIPTION The x 8 low power Parallel EEPROM fabricatedwith SGS-THOMSON proprietary single polysilicon CMOS technology. The device offers fast access time with low power dissipation and requires a 5V power supply. The circuit has been designed to offer a flexible microcontroller interface featuring both hardware and software handshaking with Data Polling and Toggle Bit. The M28C16 supports 64 byte page write operation. A Software Data Protection (SDP) is also possible using the standard JEDEC algorithm. Table 1. Signal Names

G RB VCC VSS Address Input Data Input / Output Write Enable Chip Enable Output Enable Ready / Busy Supply Voltage Ground

Note: * RB function is offered only with TSOP28 package.
This is information on a product still in production bu t not recommended for new de sign.

Parameter Ambient Operating Temperature Storage Temperature Range Supply Voltage Input/Output Voltage Input Voltage Electrostatic Discharge Voltage (Human Body model)

Notes: 1. Except for the rating "Operating Temperature Range", stresses above those listed in the Table "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the SGS-THOMSON SURE Program and other relevant quality documents. 2. 100pF through MIL-STD-883C, 3015.7

Mode Standby Output Disable Write Disable Read Write

PIN DESCRIPTION Addresses (A0-A10). The address inputs select an 8-bit memory location during a read or write operation. Chip Enable (E). The chip enable input must be low to enable all read/write operations. When Chip Enable is high, power consumption is reduced. Output Enable (G). The Output Enable input controls the data output buffers and is used to initiate read operations. Data In/ Out - DQ7). Data is written to or read from the M28C16 through the I/O pins. Write Enable (W). The Write Enable input controls the writing of data to the M28C16. Ready/Busy (RB). Ready/Busy is an open drain output that can be used to detect the end of the internal write cycle. It is offered only with the TSOP28 package. The reader should refer to the M28C17 datasheet for more information about the Ready/Busy function.

OPERATION In order to prevent data corruption and inadvertent write operations an internal VCC comparator inhibits Write operation if VCC is below VWI (see Table 7). Access to the memory in write mode is allowed after a power-up as specified in Table 7. Read The M28C16 is accessed like a static RAM. When E and G are low with W high, the data addressed is presented on the I/O pins. The I/O pins are high impedance when either E is high. Write operations are initiated when both W and E are low and G is high.The M28C16 supports both E and W controlled write cycles. The Address is latched by the falling edge or W which ever occurs last and the Data on the rising edge or W which ever occurs first. Once initiated the write operation is internally timed until completion.


Some Part number from the same manufacture
M28C64-120K1 Ic-sm-64k CMOS EePROM
M28C64-150P1 Ic-sm-64k CMOS EePROM
M28C64C-150K1 Ic-sm-64k CMOS EePROM
M28F101-120K1 Ic-sm-1m Flash Memory
M28F201-120K1 Ic-sm-2m Flash Memory
Same catergory

SD3019F : Chip Type 2c3019 Geometry 4500 Polarity PNP. Chip type 2C3019 by Semicoa Semiconductors provides performance similar to these devices. Product Summary: APPLICATIONS: Designed for general purpose switching and amplifier applications. : Radiation graphs available Metallization Bonding Pad Size Die Thickness Chip Area Top Surface Top Backside Emitter Base 12 k min. 6.5 k nom. 2.3 mils x 7.0 mils.

LY200Z : Green OVAL LAMP LED. 1. 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color & Binning 7. Outline Dimensions 8. Packing 9. Soldering 10. Precaution for use Non-standoff leads 5mm type package Color Diffused epoxy lens Viewing angle : 70/40 Dominant Wavelength :525nm Lamp LEDs are effective in hot thermal.

TMP80C49A : CMOS 8-bit Single-chip Microcomputer (tlcs-48c).

1938X350M : LED Indicator 16mm Standard Bezel with Flat Lens.

RKZ2.0BKJ : Silicon Planar Zener Diode for Surge Absorption and Stabilizer. Silicon Planar Zener Diode for Surge Absorption and Stabilizer Emboss Taping Reel Pack. Ultra small Flat Lead Package (UFP) is suitable for surface mount design. Part No. RKZ-KJ Series Laser Mark Let to Mark Code Package Name UFP Package Code PWSF0002ZA-A Item Power dissipation Junction temperature Storage temperature Note: 1. With P.C. Board. Symbol.

6367583-1 : Gold Through Hole, Right Angle Backplane - Specialized Connectors, Interconnect Receptacle, Female Sockets and Blade Sockets; ASSY Z-DOK+4 ADAPTER BRD 24PR. s: Color: Natural ; Connector Style: High Speed ; Connector Type: Receptacle, Female Sockets and Blade Sockets ; Connector Usage: - ; Contact Finish: Gold ; Contact Finish Thickness: 30in (0.76m).

12TW8-7E : Toggle Switches DPDT (ON)-OFF-(ON) Solder Term. s: Manufacturer: Honeywell ; Product Category: Toggle Switches ; RoHS:  Details ; Contact Form: DPDT ; Current Rating (Max): 5 Amps ; Voltage Rating AC: 125 Volts ; Voltage Rating DC: 28 Volts ; Termination Style: Solder ; Mounting Style: Panel ; Terminal Seal: Sealed ; Contact Plating: Gold ; Illumination:.

859-805 : Terminal Block with DC/DC Converter. s: DC / DC Converter O/P Type: Fixed ; No. of Outputs: 1 ; Input Voltage: 15V to 30V ; Power Rating: 6W ; Output Voltage: 12V ; Output Current: 500mA ; Output Voltage 2: - ; Output Current 2: - ; Output Voltage 3: - ; Output Current 3: - ; Supply Voltage: 24V ; Approval Bodies: CE / UL ; DC / DC Converter Case Style:.

ECQ-E2W474KC : 0.47F Film Capacitor Radial; CAP FILM 0.47UF 450VDC RADIAL. s: Capacitance: 0.47F ; Tolerance: 10% ; Dielectric Material: Polyester, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.591" (15.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; : General Purpose ; Lead Free Status: Lead Free ; RoHS Status:.

381-009-112L565 : Gold Through Hole, Right Angle D-sub Connectors, Interconnect Plug, Male Pins; CONN D-SUB 9POS PLUG SLD R/A. s: Connector Type: Plug, Male Pins ; Contact Finish: Gold ; : Board Lock, Shielded ; Flange Feature: Mating Side; Female Screwlock (2-56) ; Mounting Type: Through Hole, Right Angle ; Number of Positions: 9 ; Number of Rows: 2 ; Termination: Solder.

LM3S1918-EQC50-A2 : Embedded - Microcontroller Integrated Circuit (ics) Internal Tray 2.25 V ~ 2.75 V; IC ARM CORTEX MCU 8KB 100-LQFP. s: Program Memory Size: 256KB (256K x 8) ; RAM Size: 64K x 8 ; Number of I /O: 52 ; Package / Case: 100-LQFP ; Speed: 50MHz ; Oscillator Type: Internal ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: ARM.

ADNB-2031-RLK : Optical - Mouse Sensor OPT SENSOR ROUND LENS K BIN LED -; OPT SENSOR ROUND LENS K BIN LED. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

OSTOQ18A050 : Through Hole Terminal Block - Headers, Plug And Socket Connectors, Interconnect Header, Male Pins, Shrouded (2 Side); CONN TERM BLK HEADER 18POS 7.5MM. s: Terminal Block Type: Header, Male Pins, Shrouded (2 Side) ; Positions Per Level: 18 ; Pitch: 0.295" (7.50mm) ; Number of Levels: 1 ; Header Orientation: Vertical ; Plug Wire Entry: - ; Termination:.

2-1879661-9 : 261K Ohm 0.5W, 1/2W Through Hole Resistors; RES 261K OHM 1/2W 0.1% AXIAL. s: Resistance (Ohms): 261K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 0.1% ; Packaging: Bulk ; Composition: Metal Film ; Temperature Coefficient: 15ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

2913632 : Touch Screens; WEB PANEL TFT DISPLAY 3.5". s: Type: Resistive ; Diagonal Screen Size: 3.5" (88.90mm) ; Height: 3.54" (90.00mm) ; Length: 4.72" (120mm) ; Width: 0.197" (5.00mm) ; Interface: USB ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

APHCM2012CGCK : SINGLE COLOR LED, GREEN, 1.3 mm. s: LED Type: Green ; Peak Wavelength: 574 nm (5740 Å) ; Viewing Angle: 110 degrees ; Luminous Intensity: 0.0500 milliCandela ; Forward Current: 30 milliamps ; LED Package : 2 X 1.25 MM, 0.50 MM HEIGHT, LEAD FREE, SMD, 2 PIN.


50328-1132E : 132 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, RECEPTACLE. s: Connector Type: TWO PART BOARD CONNECTOR ; Gender: Female ; Termination Types: SOLDER ; Number of Contacts: 132.

MGC3130-I/MQ : IC GRAPHIC CONTROLLER 28QFN. Microchip's MGC3030/MGC3130 are single-chip solutions to enable 3D gesture control in almost any product, such as wireless speakers, radios, light switches, and remote controls. The MGC3x30 are optimized for embedded usage, require no host intelligence or resources, and come with a complete gesture portfolio. s: Family:.

FFH50US60S_F085 : DIODE STEALTH 600V 50A TO247. As CO2 regulations increase, EV/HEV manufacturers are under pressure to provide more cost-effective and energy efficient systems. Fairchild’s automotive portfolio of MOSFETs, rectifiers, IGBTs, and module driver IC products offer easy-to-use, highly flexible, and high performance EV/HEV solutions for powertrain and other.

0-C     D-L     M-R     S-Z