Details, datasheet, quote on part number: MC1404D
PartMC1404D
Category
Description
CompanyN.A.
DatasheetDownload MC1404D datasheet
  

 

Features, Applications

The MC1404 of ICs is a family of temperature­compensated voltage references for precision data conversion applications, such as A/D, D/A, V/F, and F/V. Advances in laser­trimming and ion­implanted devices, as well as monolithic fabrication techniques, make these devices stable and accurate to 12 bits over both military and commercial temperature ranges. In addition to excellent temperature stability, these parts offer excellent long­term stability and low noise. Output Voltages: Standard, 10 V

Trimmable Output: ± 6% Wide Input Voltage Range: Vref 40 V Low Quiescent Current: 1.25 mA Typical Temperature Coefficient: 10 ppm/°C Typical Low Output Noise: 12 µV p­p Typical Excellent Ripple Rejection: 80 dB Typical Voltage Reference for to 12 Bit D/A Converters Low TC Zener Replacement High Stability Current Reference MPU D/A and A/D Applications

Typical Applications
Operating Temperature Range Package Plastic DIP to +70°C Plastic DIP Plastic DIP

Rating Input Voltage Storage Temperature Junction Temperature Operating Ambient Temperature Range Symbol Vin Tstg TJ TA Value + 70 Unit V °C

ELECTRICAL CHARACTERISTICS (Vin = 25°C, and Trim Terminal not connected, unless otherwise noted.)

Output Voltage Tolerance Output Trim Range (Figure 10) (RP 100 k) Output Voltage Temperature Coefficient, Over Full Temperature Range Maximum Output Voltage Change Over Temperature Range

Line Regulation (Note 1) (Vin = Vout 40 V, Iout = 0 mA) Load Regulation (Note IO 10 mA)
Quiescent Current (IO = 0 mA) Short Circuit Current Long Term Stability
DYNAMIC CHARACTERISTICS (Vin = 25°C, all voltage ranges, unless otherwise noted.)

Characteristic Turn­On Settling Time (to ± 0.01%) Output Noise Voltage to P (Bandwidth to 10 Hz) Small­Signal Output Impedance 500 Hz Power Supply Rejection Ratio Symbol ro ­ PSRR dB Min ­ Typ 50 12 Max ­ Unit µs µV

PSRR, POWER SUPPLY REJECTION RATIO (dB)
Figure 6. Power Supply Rejection Ratio versus Frequency

 

Related products with the same datasheet
MC1404P10
MC1404P6
Some Part number from the same manufacture
MC1404P10
MC14072BCP Ic-cmos
MC141316
MC141511A
MC141512
MC141514
MC141515
MC141516
MC141518
MC141519
MC141522
MC141524
MC141531
MC141532
MC141535
MC141537
MC141539
MC141540
MC141541
MC141542P2
MC141543
Same catergory

MGFC42V5258 : 5.2-5.8 GHZ Band 16w Internally Matched GAAS Fet.

MC56F8355 : The 56F8355 and 56F8155 are members of the 56800E core-based family of controllers. It combines, on a single chip, the processing power of a Digital Signal Processor (DSP) and the functionality of a microcontroller with a flexible set of peripherals to create an extremely cost-effective solution. Because of its low cost, configuration flexibility, and compact.

PJ32 : Silicon Junction Field-effect Transistor General Purpose Amplifier. Gate Current, Ig Operating Junction Temperature, Tj Storage Temperature, to +175°C Die Size X 0.018" All Bond Pads = 0.004" Sq. Substrate is also Gate. Devices in this Databook based on the PJ32 Process. Datasheet At 25°C free air temperature: Static Electrical Characteristics Gate Source Breakdown Voltage Reverse Gate Leakage Current Drain Saturation.

KC818A : NPN Silicon AF Transistors. For general AF applications. High collector current. High current gain. Low collector-emitter saturation voltage. Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current (DC) Peak collector current Base current power dissipation Storage temperature Junction temperature Symbol VCBO VCEO VEBO IC ICM IB PD Tstg.

AP40T03GH : N-channel Enhancement MODE. Simple Drive Requirement Low Gate Charge Fast Switching S D The Advanced Power MOSFETs from APEC provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The TO-263 package is universally preferred for all commercialindustrial surface mount applications and suited for low voltage.

4414R-R2R-503 : R/2R Ladder Networks. R/2R Ladder Networks are available in both DIP and SIP (Molded or Conformal) configurations. taken from the R/2R ladder. This terminal (OUT) is commonly used to drive an operational amplifier. RT (the terminating resistor) is always connected to ground. Standard R/2R Ladder Networks have a resistance tolerance ±2.0% (±1.0% available on all but low profile.

975-009-010-011 : D-sub, D-shaped - Backshells, Hood Connectors, Interconnect Two Piece Backshell; BACKSHELL DB9 BLK PLASTIC 3WAY. s: Material: Plastic ; Number of Positions: 9 ; Shielding: Unshielded ; Hardware: Assembly Hardware, Strain Relief ; Cable Exit: 180° ; : Mating Screws 4-40 ; Accessory Type: Two Piece Backshell ; Color: Black ; Cable Type: Round ; Plating:.

ECW-F6103JL : 10000pF Film Capacitor Radial; CAP FILM 10000PF 630VDC RADIAL. s: Capacitance: 10000pF ; Tolerance: ±5% ; Dielectric Material: Polypropylene, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.394" (10.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; : High Frequency and High Stability ; Lead Free Status:.

D38999/20SF32SNLC : Stainless Steel, Nickel Plated Panel Mount, Flange Circular - Housing Connectors, Interconnect Receptacle for Female Contacts; CONN HSG RCPT 32POS WALL MT SCKT. s: : Shielded ; Packaging: Bulk ; Connector Type: Receptacle for Female Contacts ; Mounting Type: Panel Mount, Flange ; Shell Size - Insert: 19-32 ; Contact Type: Crimp ; Fastening Type: Threaded.

SP6650EU-L/TR : Pmic - Voltage Regulator - Dc Dc Switching Regulator Integrated Circuit (ics) Step-Down (Buck) 600mA 3.3V, 1.25 V ~ 5 V; IC BUCK SYNC 3.3V ADJ .6A 10MSOP. s: Type: Step-Down (Buck) ; Output Type: Both ; PWM Type: - ; Synchronous Rectifier: Yes ; Number of Outputs: 1 ; Voltage - Output: 3.3V, 1.25 V ~ 5 V ; Current - Output: 600mA ; Frequency - Switching:.

EWCS8120C.A1-900083 : Interface - Telecom Integrated Circuit (ics) * *; IC EPON OLT 10GBPS COMM 854HSBGA. s: Interface: XAUI ; Number of Circuits: * ; Current - Supply: * ; Voltage - Supply: * ; Operating Temperature: * ; Power (Watts): * ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

PS7112L-1A : Solid State Relay 6-SMD Gull Wing SPST-NO (1 Form A); SSR OCMOS FET 200MA NO 6-SMD. s: Mounting Type: Surface Mount ; Termination Style: Gull Wing ; Package / Case: 6-SMD Gull Wing ; Circuit: SPST-NO (1 Form A) ; Load Current: 200mA ; Voltage - Input: 1.2VDC ; Voltage - Load: 0 ~ 100 V ; Output Type: AC, DC ; On-State Resistance: 6 Ohm ; Lead Free Status:.

OSTYD152150 : Through Hole Terminal Block - Wire To Board Connectors, Interconnect Through Hole; TERM BLOCK RISING CLAMP 15POS. s: Color: Green ; Current: 10A ; : Interlocking (Side) ; Mating Orientation: Horizontal with Board ; Mounting Type: Through Hole ; Pitch: 0.200" (5.08mm) ; Voltage: 300V ; Wire Gauge: 12-24 AWG ; Number of Levels: 1 ; Positions Per Level:.

AFL5015DW : 2-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE. s: Package Type: Other, 0.380 INCH, LOW PROFILE, SEAM WELDED PACKAGE-12 ; Output Voltage: 14.85 to 15.15 volts ; Input Voltage: 30 to 80 volts ; Output Power: 100 watts (0.1340 HP) ; Operating Temperature: -20 to 85 C (-4 to 185 F).

OPB885 : 9.53 mm SLOT WIDTH, 1 CHANNEL SLOTTED OPTICAL SWITCH TRANSISTOR OUTPUT. s: Operating Temperature: -40 to 185 F (233 to 358 K).

234182 : 15 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, PRESS FIT. s: Connector Type: D-Sub ; Gender: Male ; Termination Types: PRESS FIT ; Number of Contacts: 15 ; RoHS Compliant: RoHS.

32SEPF22M : CAPACITOR, ALUMINUM ELECTROLYTIC, SOLID POLYMER, POLARIZED, 32 V, 22 uF, THROUGH HOLE MOUNT. s: Configuration / Form Factor: Leaded Capacitor ; : Polarized ; Capacitance Range: 22 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 32 volts ; Leakage Current: 140 microamps ; ESR: 35 milliohms ; Mounting Style: Through Hole ; Operating Temperature: -55 to 105 C (-67.

 
0-C     D-L     M-R     S-Z