Details, datasheet, quote on part number: MC33293A
DatasheetDownload MC33293A datasheet
Find where to buy


Features, Applications

The is a single monolithic integrated circuit designed for quad low side switching applications. This device was initially conceived as a quad injector driver for use in the harsh automotive environment but is well suited for many other applications. The MC33293A incorporates SMARTMOSTM technology having CMOS logic, bipolar and CMOS analog circuitry and DMOS power MOSFETs. All of the device inputs are CMOS compatible. The four output devices are N-channel power MOSFETs. A Fault detect output is provided to flag the existence of open loads (outputs ON or OFF) or shorted loads. If a short circuit is detected, the fault detect circuitry turns off the shorted output, but allows the others to function normally. An overvoltage (VPWR) condition will turn off all outputs for the overvoltage duration. Each output functions independently and has a drain-to-gate diode clamp for inductive flyback voltage protection. A Single/Dual select pin is incorporated to allow either individual output control or control of a pair of outputs from one input. The MC33293A is parametrically specified over TA 125C ambient temperature and 9.0 V VPWR 14.5 V supply. Designed to Operate with Supply Voltages 30 V

CMOS Compatible Inputs with Active Pull-Downs Maximum 5.0 mA Quiescent Current RDS(on) of 0.25 Maximum at 25C, with VPWR 9.0 V Each Output Clamped 65 V for Driving Inductive Loads Each Output Current Limited A to handle Incandescent Lamp Loads Active Low Output Fault Status with Interrogation Capability Open Load Detection (Output ON or OFF) Capable of Withstanding Reverse Battery Overvoltage Shutdown Short Circuit Detection and Shutdown with Automatic Retry

This document contains information on a new product. Specifications and information herein are subject to change without notice. MOTOROLA ANALOG IC DEVICE DATA

7 3 Input 1 4 Input 2 13 Input 3 12 Input 4 5 Input & 2 Single/Dual 6 Select 11 Input Fault Encoder From Detectors 2,3,4 Open Load Detect Short Circuit Detect To Gates 2,3,4 15 Output 4 Gate Control 2 1 Output 2 14 Output 3 Output 1 Overvoltage Shutdown Bias Circuit Bias +VPWR

Rating VCC Steady-State Transient Conditions Input Pin Voltage ESD Capability Human Body Model = 200 pf) Lead Current (per Output) Single Pulse Clamp Energy 1.5 A Storage Temperature Operating Temperature Lead Temperature (Wave Solder, 10 s) Power Dissipation = 105C Power Dissipation = 125C Derate for every C above 25C Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case. Any one O/P Symbol VPWR VPWR(pk) Vin VESD 2000 IOut Eclamp Tstg TJ Tsolder PD Internally Limited C W W/C C/W Value 7.5 V Unit V

STATIC ELECTRICAL CHARACTERISTICS (9.0 V VPWR 14.5 V and TC +125C, unless otherwise

noted. Typical values are at 25C, unless otherwise noted.) Characteristic INPUT Turn ON Threshold Operating Voltage Range Quiescent Power Supply Current (All Inputs off) Overvoltage Shutdown Range Overvoltage Reset Hysteresis Input Voltage High (IDS 1.0 A) Low (IDS = 80 A) Input High Hysteresis (IDS 1.0 A) Input Current High (VIH 3.0 V) Low (VIL 0.8 V) OUTPUT Static Drain-Source On-Resistance (IDS 1.0 A, VPWR + 25C) (IDS 1.0 A, VPWR = +125C) (IDS 0.7 A, VPWR + 25C) (IDS 0.4 A, VPWR + 25C) Drain-Source Clamp Voltage (IDS = 20 mA, Vin 0 V, tclamp = 100 s) Zero Input Voltage Drain Current (VDS 25 V, VPWR 14.5 V) (VDS 58 V, VPWR 14.5 V) Source Drain Diode Forward Voltage (ISD 1.0 A) RDS(on) BVDSS 55 IDS(off) 10 VSD mA V Von(th) VPWR IPWR VPWR(ov) VPWR(hys) VIH VIL VIH(hys) IIH IIL mA V Symbol Min Typ Max Unit


Related products with the same datasheet
Some Part number from the same manufacture
MC3340P Ic-electronic Attenuator
Same catergory

CD4029B : CMOS Presettable Up/down Counter. Data sheet acquired from Harris Semiconductor SCHS034A Revised March 2002 The CD4029B-series types are supplied in 16-lead ceramic dual-in-line plastic packages (E suffix), 16-lead small-outline package (NSR suffix), and in chip form (H suffix). .

CPH3403 : Ultrahigh-speed Switching, Package : CPH3. s Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm20.8mm) Conditions Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current.

MIC923 : MIC923 410MHz Low-power SC-70 op Amp. The is a high-speed operational amplifier with a gainbandwidth product of 410MHz. The part is unity gain stable. It has a very low 2.5mA supply current, and the TeenyTMSC70 package. Supply voltage range is from to 9V, allowing the to be used in low-voltage circuits or applications requiring large dynamic range. The MIC923 requires a minimum gain or 1 but is stable.

NJM2267 : Dual Video 6dB Amplifier With 75 Ohms Driver.

SN74ALS1000A : Bus Oriented Circuits. Quadruple 2-input Positive-nand Buffers/drivers.

F931V335KBA : 3.3F Tantalum Capacitor 1411 (3528 Metric) 35V; CAP TANT 3.3UF 35V 10% 1411. s: Capacitance: 3.3F ; Voltage - Rated: 35V ; Tolerance: 10% ; : General Purpose ; Operating Temperature: -55C ~ 125C ; Lead Spacing: - ; ESR (Equivalent Series Resistance): 3.500 Ohm ; Lifetime @ Temp.: - ; Mounting Type: Surface Mount ; Type: Molded ; Package / Case:.

CA3106E18-22PBA232 : Aluminum, Black Zinc Cobalt Plated Free Hanging (In-Line) Circular Connectors, Interconnect Plug, Male Pins; CONN PLUG 3POS INLINE W/PINS. s: Connector Type: Plug, Male Pins ; Shell Size - Insert: 18-22 ; Mounting Type: Free Hanging (In-Line) ; Fastening Type: Bayonet Lock ; : Strain Relief ; Packaging: Bulk ; Number of Positions: 3 ; Termination: Solder.

HPL1005-5N6 : Fixed Inductors, Coils, Choke 5.6nH 450mA 0402 (1005 Metric) Thin Film; INDUCTOR 5.6NH +/-0.2NH 0402. s: Inductance: 5.6nH ; Tolerance: 0.2nH ; Package / Case: 0402 (1005 Metric) ; Packaging: Cut Tape (CT) ; Type: Thin Film ; Current: 450mA ; Mounting Type: Surface Mount ; Q @ Freq: 10 @ 300MHz ; Frequency - Self Resonant: 5.5GHz ; DC Resistance (DCR):.

SSQ-146-01-S-S : Gold Through Hole Rectangular - Headers, Receptacles, Female Socket Connectors, Interconnect Receptacle; CONN RCPT .100" 46POS SNGL GOLD. s: Color: Black ; Connector Type: Receptacle ; Contact Finish: Gold ; : - ; Mounting Type: Through Hole ; Number of Positions Loaded: All ; Number of Rows: 1 ; Pitch: 0.100" (2.54mm) ; Row Spacing: - ; Packaging:.

2-1589462-3 : Gold Surface Mount, Right Angle Rectangular - Headers, Receptacles, Female Socket Connectors, Interconnect Receptacle; CONN RCPT 9POS HORIZONTAL SMD. s: Color: - ; Connector Type: Receptacle ; Contact Finish: Gold ; : - ; Mounting Type: Surface Mount, Right Angle ; Number of Positions Loaded: All ; Number of Rows: 1 ; Pitch: 0.025" (0.64mm) ; Row Spacing:.

AP7331-SNG-7 : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO ADJ 0.3A 6DFN. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

SM6227FB100R : 100 Ohm 3W Chip Resistor - Surface Mount; RES 100 OHM 3W 1% WW 6227. s: Resistance (Ohms): 100 ; Power (Watts): 3W ; Tolerance: 1% ; Packaging: Bulk ; Composition: Wirewound ; Temperature Coefficient: 20ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

1676643-1 : 11 Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 11.0 OHM 1/10W 0.1% 0805. s: Resistance (Ohms): 11 ; Power (Watts): 0.1W, 1/10W ; Tolerance: 0.1% ; Packaging: Bulk ; Composition: Thin Film ; Temperature Coefficient: 10ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

RJ13B253 : Ohm Trimmer Potentiometers, Variable Resistors Top Adjustment Single Turn; TRIMMER 25K OHM 0.75W HOOK. s: Resistance (Ohms): 25K ; Power (Watts): 0.75W, 3/4W ; Number of Turns: Single ; Adjustment Type: Top Adjustment ; Tolerance: 10% ; Mounting Type: Panel Mount ; Temperature Coefficient: 100ppm/C ; Resistive Material: Cermet ; Packaging: Bulk ; Lead.

BD3540NUV : 0.65 V-2.7 V ADJUSTABLE POSITIVE LDO REGULATOR, 0.3 V DROPOUT, PDSO10. s: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Adjustable / Variable ; Package Type: Other, 3.0 X 3.0 MM, 1.0 MM HEIGHT, ROHS COMPLIANT, VSON-10 ; Life Cycle Stage: ACTIVE ; Output Voltage: 0.6500 to 2.7 volts ; IOUT: 0.5000 amps ; Dropout Voltage:.

18DH-0 : 0 MHz - 18000 MHz RF/MICROWAVE FIXED ATTENUATOR. s: Attenuator Type: Fixed ; Frequency: 0.0 to 18 GHz ; VSWR: 1.35 1 ; Attenuation: 0.0 dB ; Package Type: ROHS COMPLIANT PACKAGE.

24-216/T1D-APQHY/2A : SINGLE COLOR LED, PURE WHITE, 1.6 mm. s: LED Type: White ; Viewing Angle: 140 degrees ; Luminous Intensity: 0.0785 milliCandela ; Forward Current: 25 milliamps ; LED Package : ROHS COMPLIANT, SMD, 2 PIN.

0-C     D-L     M-R     S-Z