Details, datasheet, quote on part number: MP8-3E-30
PartMP8-3E-30
Category
DescriptionPsu 5v 160a
CompanyN.A.
DatasheetDownload MP8-3E-30 datasheet
  

 

Features, Applications

Current share on all main outputs with ratings A or greater Remote sense on all outputs with ratings greater than 2 A Overload protection on all outputs Voltage adjustment on all outputs Margining on all single output modules Input-OK-signal and status indicator LED Global DC OK signal and status indicator LED Global and individual module inhibits/enable 1 year warranty Forced air cooling, field replaceable fan Isolated 5 V bias voltage Power factor correction IEC EN61000-3-2 harmonic distortion compliance CISPR 22, EN55022 Curve B conducted / radiated EMI IEC 801 immunity standards European CE Mark requirements Optional VME timing and system DC OK module Low leakage option for medical applications

Operating temperature: to 50°C (start @ 0°C) (derate each output linearly to 40°C max. with rear air option) Shock/Vibration: Mil-Hdbk 810E Humidity: 95% non-condensing Storage temperature: to +85°C Temperature coefficient: 0.02% per °C Cooling: Internal DC fan (Field replaceable) (P/N 73-688-0001)

UL CSA IEC VDE BABT E133211 CSA22.2 No. 234 Level LR53982 IEC950, Class EN60950 11774-3336-xxxx Compliance BS 7002 Certificate and report Mark

ASTEC ASIA 6F., China Dyeing Works Building 382-392 Castle Peak Road Tsuen Wan, N.T., Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426

ASTEC EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, 1LX, UK Telephone: 01384-842211 Facsimile: 01384-843355

ASTEC AMERICA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698

Input voltage...........................85-264 VAC 120-350 VDC Frequency..............................47-440 Hz Inrush current.........................40 A peak max. Efficiency................................70-80% typ. @ full case load Power factor...........................0.99 typ. meets EN61000-3-2 Turn-on time...........................AC on 1.5 sec typ., Inhibit / Enable 150 ms typ. EMI filter standard..................CISPR 22 EN55022 Level "B" EMI filter (low leakage option)...CISPR 22 EN55022 Level "A" Leakage current standard......2.0 mA max. @ 240 VAC Leakage current (low leakage option)...............300 µA max. @ 240 VAC Radiated EMI.........................CISPR 22 EN55022 Level "B" Holdover storage....................20 ms minimum (independent of input VAC) OK....................................>5 ms early warning min. before outputs loose regulation Full cycle ride thru (50 Hz) Harmonic distortion................Meets EN61000-3-2 Isolation..................................Meets EN60950 Global Inhibit/Enable..............TTL, Logic "1" and Logic "0" Input fuse A Warranty.................................1 year

Adjustment range...................±10% min. all outputs Margining...............................±4-6% nom.1 Overall 20 mV max. (36 W modules 4% max.) Ripple.....................................RMS: or 10 mV, whichever is greater Pk-Pk: or 50 mV, whichever is greater Bandwidth limited to 20 MHz Dynamic or 100 mV, with 25% load step. Recovery time........................To within in <300 µsec. Overcurrent protection...........Single, main of dual output module 105-120% of rated output current. Aux output of dual output module 105-140% of rated output current. Triple output module Internally protected Short circuit protection...........Protected for continuous short circuit. Recovery is automatic upon removal of short Overvoltage protection...........Single output modules (measured at sense V 122-134% connection) V 110-120% Dual output module V 110-120% Triple output module. No overvoltage protection provided. Recycle the AC input voltage to reset OVP circuit Reverse voltage protection...............................100% of rated output current Thermal protection.................All outputs disabled when internal temp exceeds safe operating range. >5 ms warning (AC OK signal) before shutdown Remote sense........................Up 0.5 V total drop Single wire parallel.................Current share to within 2% of total rated current -8% of nominal for any monitored output 2 Minimum load.........................Not required on single or triple output modules. 10% required on main of dual output modules 3 (Consult factory if pre-loaded required) Housekeeping Bias voltage...........................5 VDC @250 mA max. present whenever AC input is applied Module inhibit.........................TTL, isolated, singles and dual (both outputs) only Switching frequency...............250 kHz Output/Output isolation..........>1 Megohm

Notes: 1 Single output modules only. 2 Single and main of dual output modules only. 3 Contact factory for optional preload if required.

Case Size (inches): 10, 5 available slots, 400 W max. 11, 5 available slots, 600 W max. 10, 6 available slots, 800 W max. 11, 7 available slots, 1000 W max. & MP1 Only) Slot #6

Option Code: = no options 1 = rear air exhaust 3 = global enable 5 = option package (options 3) M =low leakage N = low leakage plus option P = low leakage plus option R = low leakage plus option 5 (MP1 Only) Slot #7

or 3 Digit Code See Output Currents Next Page

Use " for Standard Remote Sense Use / " After any module using Remote Sense with o-ring diode (redundancy)

Notes: 1 Omit digits that do not apply. 2 Specify modules from lowest number of outputs to highest.(Single/Dual/Triple) 3 If number of outputs are equal, specify modules from highest to lowest power increments. If power increments are equal, specify in decending alphabetical order (1A, B, C...). 4 Always start with Slot 1. 5 All MVP model configurations created using this selection guide are standard MVP products with standard availability and lead times.


 

Related products with the same datasheet
MP8-3L-1L-30
MP8-3Q-1Q-30
MP8-3W-1W-30
Some Part number from the same manufacture
MP8-3L-1L-30 Psu 5v 160a
MPC1185
MPC1225H
MPC1230H
MPC1238
MPC1241H
MPC1710AML
MPC17A34RVMEL
MPC2005
MPC2014
MPC2385
MPD17704
MPS4452S Proximity Switch
MPU150-4000 Psu 150 W 4 O/p
MPW-PLUS Micro Plus System
MPX02P Transistor Pad To92
MPY600AP Ic-signal Multiplier
MQ10-60APS-KTO Proximity Switch
MR001
MR62-12USB Relay Dpco 12vdc
MR82-12USR
Same catergory

CEM8435 : P-channel Enhancement Mode Field Effect Transistor.

FXT557 : . ISSUE 1 MARCH 94 * 300 Volt VCEO * 0.5 Amp continuous current * Ptot= 1 Watt PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Peak Pulse Current Continuous Collector Current Power Dissipation at Tamb=25°C Operating and Storage Temperature Range SYMBOL VCBO VCEO VEBO ICM IC Ptot Tj:Tstg PARAMETER Collector-Base Breakdown.

MG75Q2YS51 : 1200V IGBT Plus modules. Vces (volts) = 1200 ;; Ic (amps) = 75 ;; Vce (sat) Max = 3.6 ;; Ton (usec) = 0.2 ;; Toff (usec) = 0.6.

YTD428 : All Dsu Primary Circuits on a Single Chip.

LM3100 : SIMPLE SWITCHER® Synchronous 1MHz 1.5A Step-Down Voltage Regulator™ Synchronous 1MHz 1.5A Step-Down Voltage Regulator he LM3100 Synchronously Rectified Buck Converter all functions needed to implement a highly efficient, cost effective buck regulator capable of supplying 1.5A to loads with voltages as low as 0.8V. Dual 40V N-Channel synchronous MOSFET.

C1-1N2S-10 : Ceramic CHIP Inductors. (a) Series code (b) Inductance code = 1.0nH (c) Tolerance code = ±5% 3. GENERAL : a) Operating temp. +85°C b) Storage temp. +40°C c) Humdity range 70% RH Max. d) Resistance to solder heat : 265°C.6secs NOTE : s subject to change without notice. Please check our website for latest information. .

NE900100 : Ku-band Medium Power GaAs Mesfet. CLASS A OPERATION HIGH OUTPUT POWER POUT = 26.5 dBm 7 dB HIGH POWER ADDED EFFICIENCY Linear Gain (dB) The NE9000, NE9001, and NE9002 are 0.5 micron recessed gate medium power GaAs FETs for commercial and space amplifier and oscillator applications to 20 GHz. Chip configurations available are: the NE900000, a one cell die 400 µm gate width; the NE900100,.

PJ2PJ : Surface Mount Crystals 5.5 x 11.7 x 2.2 Mmparameters. PARAMETERS Frequency Range* Tolerance @ +25°C Stability Aging Shunt Capacitance Load Capacitance Standard Operating Conditions Equivalent Series Resistance (ESR), Max. Fundamental (AT-cut) to 3.999 MHz to 7.999 MHz to 9.999 MHz to 19.999 MHz to 30.000 MHz Drive Level Mechanical Shock Vibration Thermal Cycle Max Soldering Conditions VALUE to 30.000 MHz See Table.

74HC4510D : Binary Up/down Counter. For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family s The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines Product File under Integrated Circuits, IC06 December 1990 Output capability: standard ICC category: MSI GENERAL The 74HC/HCT4516 are high-speed Si-gate CMOS.

3-5504969-0 : Fiber Optic Cable Assembly 42.6' (13m) Riser, Zipcord; CA 50/125UM LFF ZIP SC DUP. s: 1st Connector: SC Duplex ; 2nd Connector: SC Duplex ; Cable Diameter: 0.12" (3.0mm) ; Cable Type: Twin Zip ; : Riser, Zipcord ; Fiber Type: 50/125 ; Length - Overall: 42.6' (13m) ; Type: Multimode, Duplex ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

1523492 : Individual Accessory Industrial Controls, Meter; CABLE PNL MNT 8POS PLUG-WIRE .5M. s: Cable Type: Individual ; Connector Type: Circular 08 pos Male to Wire Leads ; Length: 1.64' (500.00mm) ; Color: Multiple ; Usage: Panel Mount, Industrial ; Shielding: Unshielded ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

74VHCT00AMX : Logic - Gate And Inverter Integrated Circuit (ics) NAND Gate Tape & Reel (TR) 8mA, 8mA 4.5 V ~ 5.5 V; IC GATE NAND QUAD 2INPUT 14SOIC. s: Number of Circuits: 4 ; Package / Case: 14-SOIC (0.154", 3.90mm Width) ; Logic Type: NAND Gate ; Packaging: Tape & Reel (TR) ; Mounting Type: Surface Mount ; Number of Inputs: 2 ; Current - Output High, Low:.

SI2434-D-FT : Interface - Modem - Ic And Module Integrated Circuit (ics); IC ISOMODEM SYSTEM-SIDE 24TSSOP. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

K-2951 : RF CONNECTOR, PLUG. s: Applications: RF and Microwave Connectors.

 
0-C     D-L     M-R     S-Z