|
Details, datasheet, quote on part number:R07-100-RNKG
| |
Datasheet text preview:
R07
Miniature Series 07 General Purpose Regulator 1/8" and 1/4" Port Sizes q Compact design q Full flow gauge ports q Low torque, non-rising adjusting knob q Snap action knob locks pressure setting when pushed in q Standard relieving models allow reduction of outlet pressure even when the system is dead-ended q Can be disassembled without the use of tools or removal from the air line
Technical Data
Fluid: Compressed air Maximum pressure: 20 bar (300 psig) Operating temperature: -20° to +65°C (0° to +150°F) *
* Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F).
Ordering Information
See Ordering Information on the following pages.
Typical flow at 10 bar (145 psig) inlet pressure, 6,3 bar (90 psig) set pressure and a droop of 1 bar (14.5 psig) from set: 1/8" ports: 6,5 dm3/s (14 scfm) 1/4" ports: 7 dm3/s (15 scfm) Gauge ports: 1/8" PTF with PTF main ports 1/8" ISO Rc with ISO Rc main ports 1/8" ISO Rc with ISO G main ports Materials: Body: Zinc Bonnet: Acetal Valve: Brass/nitrile Valve seat: Acetal Elastomers: Nitrile
ISO Symbols
Relieving
Relieving
1/97
Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document.
N/AL.8.300.200.01
R07
Typical Performance Characteristics
PORT SIZE: 1/4" RANGE: 0,3 to 7 bar (5 to 100 psi) FLOW CHARACTERISTICS bar g psig INLET PRESSURE: 10 bar g (145 psig)
8 100 OUTLET PRESSURE 6 80
60
4
40 2 20
0
0 0 0 2 4 8 4 12 AIR FLOW 6 16 8 20 10 dm3/s 24 scfm
Ordering Information. Models listed are include ISO G threads, relieving diaphragm, 0,3 to 7 bar (5 to 100 psig) outlet
pressure adjustment range* without gauge.
Port Size G1/8 G1/4
Model Number R07-100-RNKG R07-200-RNKG
Flow dm3/s (scfm) 6,5 (14) 7 (15)
Weight kg (lbs) 0,19 (0.31) 0,19 (0.31)
Approximate flow at 7 bar (100 psig) inlet pressure, 6.3 bar (90 psig) set pressure and a droop of 1 bar (14.5 psig) from set.
Alternative Models
R 0 7 - 55 5 - 5555
Port Size 1/8" 1/4" Option Not applicable Option Standard Low flow seat H.P. unit, 10 bar (145 psig) * Substitute 1 2 Substitute 0 Substitute 0 2 5** Threads PTF ISO Rc taper ISO G parallel Substitute A B G
Outlet Pressure Adjustment Ranges* Substitute 0,1 to 0,7 bar (1 to 10 psig) A 0,3 to 3,5 bar (5 to 50 psig) E 0,3 to 7 bar (5 to 100 psig) K 0,3 to 10 bar (5 to 145 psig) M** Gauges With Without Diaphragm Relieving Non relieving Substitute G N Substitute R N
Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. When specifying 10 bar (145 psig) unit, eg. R07-205-RNMG, also note correct code at 6th digit.
**
Accessories
Wall Mounting Bracket and Panel Nut for P1H Unit Plastic: 18-025-003
Panel Nut Plastic: 2962-89 Metal: 2962-04
Tamper Resistant Field Modification Knob and screw: 18-001-092 Screw only: 6097-08
Ø 40 mm Pressure Gauge 2 bar (30 psig): 4 bar (60 psig): 10 bar (150 psig): 25 bar (350 psig):
R1/8 Connection 1/8" PTF Connection -- 18-013-990 18-013-989 18-013-908 18-013-214 18-013-211 18-013-212 --
N/AL.8.300.200.02
Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document.
1/97
R07
Dimensions mm (inches)
Panel mounting hole diameter 30 mm (1.19") Maximum panel thickness 0 to 6 mm (0 to 0.25")
41 (1.63) 23 19 (0.73) (0.91)
54 (2.13)
40 (1.57)
28 (1.1)
38 (1.50) 64 (2.52)
Bracket Mounting
Use 3 mm (1/8") screws to mount bracket to wall.
24 (0.95)
75 (2.91)
Bracket Kit Reference
Item All models Part Number 18-025-003
63 (2.47)
38 (1.50) 24 (0.93) 7 (0.29)
6 (0.22)
28 to 44 (1.09 to 1.73) 42 (1.65)
Service Kits
Item Service kit Type Relieving Non-relieving Part number 3407-02 3407-01
Service kit includes slip ring, diaphragm, standard valve seat with o-ring, valve, valve spring.
34 (1.34)
1/97
Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document.
N/AL.8.300.200.03
|
|
