|
Details, datasheet, quote on part number:R64G-NNK-RMN
| |
Datasheet text preview:
R64G
Olympian Plus Regulator 1/4", 3/8", 1/2", 3/4" Port Sizes q Olympian Plus plug in design q High flow general purpose regulator q Push to lock adjusting knob with tamper resistant option q Mount in any orientation
Technical Data
Fluid: Compressed air Maximum pressure: 17 bar (250 psig) Operating temperature*: -20° to +80°C (0° to +175°F)
* Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F).
Ordering Information
See Ordering Information on the following pages.
Typical flow at 10 bar (145 psig) inlet pressure, 6,3 bar (90 psig) set pressure and a droop of 1 bar (15 psig) from set: 120 dm3/s (254 scfm)
Can be adjusted to zero bar outlet and, generally, to pressures in excess of those specified
Gauge ports: ISO Rc 1/8 Materials: Body: Zinc Bonnet: Aluminium Yoke: Zinc Valve: Brass Elastomers: Synthetic rubber
ISO Symbols
Relieving
Non Relieving
1/97
Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document.
N/AL.8.240.200.01
R64G
Typical Performance Characteristics
FLOW CHARACTERISTICS bar g psig
8 100 OUTLET PRESSURE 6 80
PORT SIZE: 1/2"
INLET PRESSURE: 10 bar g (145 psig) RANGE: 0,3 to 10 bar (5 to 145 psig)
60
4
40 2 20
0
0 0 0 40 80 80 160 120 240 AIR FLOW 160 320 200 400 dm3/s scfm
Ordering Information. Models listed include unidirectional flow, ISO G threads, knob adjustment, relieving diaphragm, 0,3 to 10 bar (5 to 145 psig) outlet pressure adjustment range* without gauge.
Port Size G1/4 G3/8 G1/2 G3/4 Model R64G-2GK-RMN R64G-3GK-RMN R64G-4GK-RMN R64G-6GK-RMN Flow dm3/s (scfm) 35 (74) 80 (170) 120 (254) N.A. Weight kg (lb) 1,54 (3.42) 1,52 (3.38) 1,49 (3.31) 1,85 (4.11)
Typical flow with 10 bar (145 psig) inlet pressure, 6,3 bar (90 psig) set pressure and a 1 bar (15 psig) droop from set. For replacement regulator (without yoke) substitute `N' at the 5th and 6th digits eg: R64G-NNK-RMN.
Alternative Models
R6 4 5-555-555
Flow Type Standard Reverse flow Port Size 1/4" 3/8" 1/2" 3/4" Threads PTF ISO Rc taper ISO G parallel Substitute G R Substitute 2 3 4 6 Substitute A B G Gauge With Without Outlet Pressure Adjustment Range* 0,3 to 4 bar (5 to 60 psig) 0,3 to 10 bar (5 to 145 psig) 2 to 17 bar (30 to 250 psig) Diaphragm Relieving Non relieving Adjustment Knob T-bar Substitute G N Substitute F M S** Substitute R N Substitute K T
* Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** Units with 17 bar (250 psig) outlet pressure range are available only with the T-bar adjustment; therefore substitute T at the 7th digit and S at the 9th position. Please contact our technical service for details of non standard models including maximum pressure stop, etc.
N/AL.8.240.200.02
Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document.
1/97
R64G
Accessories
Wall Mounting Bracket 74504-50
Panel Nut 4348-89
Ø 50 mm Pressure Gauge 6 bar (60 psig): 10 bar (150 psig): 25 bar (360 psig):
Tamper Resistant Kit R1/8 Connection 18-013-012 18-013-013 18-013-014 1/8 PTF Connection -- 18-013-209 18-013-210 4355-50 Seal Wire: 2117-01
Dimensions mm (inches)
Panel mounting hole diameter: 52 mm (2.06") Panel thickness: 0 to 6 mm (0" to 0.25")
200 (7.87)
105 (4.13)** 37 (1.46)
123 (4.84)
Reduces by 4 mm with knob in locked position. Add 37 mm for unit with `T' handle. ** 157 mm (6.18") for G3/4 models
Bracket Mounting
Use 8 mm (5/16") screws to mount bracket to wall.
8,2 (0.32) 143 (5.63) 114 (4.49) 30,5 (1.20)
74 (2.91)
176 (6.93)
Bracket Kit Reference
Item Wall bracket Part Number 74504-50
11 (0.43)
14,5 (
85 (3.35)
1/97
Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document.
48 (1.89)
N/AL.8.240.200.03
|
|
