Details, datasheet, quote on part number: STK6714AMK4
PartSTK6714AMK4
Category
Description
CompanyN.A.
DatasheetDownload STK6714AMK4 datasheet
Cross ref.Similar parts: TB67S141NG
  

 

Features, Applications

4-Phase Stepping Motor Driver Unipolar Self-Excitation Type (IO=1.5A)

The is a unipolar fixed-current choppertype self-excitation 4-phase stepping motor driver hybrid IC which uses MOSFET power devices. The excitation sequence signal is active-high.

Applications

Serial printer, line printer, and laser beam printer (LBP) paper feed and carriage motor drivers. PPC scanner and LBP feed drivers.

Features

Simultaneous ON prevention circuit built-in to prevent driver breakdown due to simultaneous ON control signals from the control system's microcontroller, etc. Self-excitation design means chopping frequency is determined by motor L and R. Supports chopping 20kHz or higher. Two 0.33 current detection resistors built-in for fixedcurrent chopping operation. Wide operating supply voltage range to 42V for motor drive). Unipolar design enables use as a driver for hybrid, PM, or VR-type stepping motors Supports W1-2 phase operation, with dual Vref pins.

The following devices from a series with differing excitation signal active level and output capacity. Some of the following devices are under development. Contact your Sanyo sales representative if you require more detailed information.

Type No. STK6714AMK4 STK6714BMK4 Excitation signal Active-high Active-low Active-high Active-low Active-high Active-low Active-high Active-low Output current (per phase) 1.5A Selfexcitation Type

Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Parameter Maximum supply voltage 1 Maximum supply voltage 2 Maximum phase current Repeated avalanche handling capability Junction temperature Operating substrate temperature Storage temperature Symbol VCC1 max VCC2 max IOH max Ear max Tj max Tc max Tstg No input signal No input signal 1 0.5s pulse, VCC applied Conditions Ratings to +125 Unit mJ C

Parameter Supply voltage 1 Supply voltage 2 Phase driver withstand voltage Phase current Symbol VCC1 VCC2 VDSS IOH max With input signal With input signal 50% duty Conditions Ratings min typ max 42 5.25 Unit

Parameter Output saturation voltage Average output current Pin current drain FET diode forward voltage TTL-input high level voltage TTL-input low level voltage Switching time Symbol Vst Ioave ICC2 Vdf VIH VIL tON tOFF Conditions RL=23, Vin=2.4V Load L=3.8mH, Vin=2.4V, per phase Load L=3.8mH, Vin=2.4V, per phase If=1.0A Input voltage when F4 ON Input voltage when F3, F4 OFF RL=24, Vin=2.4V Ratings min 0.45 typ max Unit ns s

Note : All tests are made using a constant-voltage supply.

 

Related products with the same datasheet
STK6714BMK4
Some Part number from the same manufacture
STK6714BMK4
STK6860H
STK730
STK73903
STK740-400
STK750
STK7560
STL39002
STL51004
STL51007
STL51704
STL81004
STL81007
STLC
STLC3040
STLC3040-TR
STLC5412
STLC5432
STLC5460
STLC5464
STLC7545
Same catergory

EL5411IREZ : 60mhz Rail-to-rail Input-output Op Amps. The EL5111, EL5211, and EL5411 are low power, high voltage rail-to-rail input-output amplifiers. The EL5111 represents a single amplifier, the EL5211 contains two amplifiers, and the EL5411 contains four amplifiers. Operating on supplies ranging from to 15V, while consuming only 2.5mA per amplifier, the EL5111, EL5211, and EL5411 have a bandwidth 60MHz.

S20S80CR : Schottky Barrier Rectifiers. The I PAK Power rectifier employs the Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art devices have the following : * Low Forward Voltage. * Low Switching noise. * High Current Capacity * Guarantee Reverse Avalanche. * Guard-Ring for Stress Protection. * Low Power Loss & High efficiency. * 150J Operating Junction Temperature.

APEK4985SLP-01-T : Eval And Demo Board And Kit Programmers, Development System; Board Eval Motor Control A4985. s: Main Purpose: Power Management, Motor Control, Stepper ; Primary Attributes: - ; Secondary Attributes: - ; Supplied Contents: Board ; Utilized IC / Part: A4985 ; Embedded: No ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

MPI001/28/GN : Pushbutton Switches GRN DOT SOLDER LUG. s: Manufacturer: Bulgin ; Product Category: Pushbutton Switches ; RoHS:  Details ; Contact Form: SPST ; Switch Function: Push ; Current Rating (Max): 50 mAmps ; Voltage Rating DC: 24 Volts ; Mounting Style: Panel ; Illumination: Illuminated ; Illumination Color: Green ; Termination Style: Solder Lug ; Contact.

C1206C223K3RACTU : 0.022F Ceramic Capacitor 1206 (3216 Metric) 25V; CAP CER 0.022UF 25V X7R 1206. s: Capacitance: 0.022F ; Voltage - Rated: 25V ; Tolerance: 10% ; Package / Case: 1206 (3216 Metric) ; Temperature Coefficient: X7R ; Packaging: Tape & Reel (TR) ; : - ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC ; Lead.

592D336X96R3S2T12H : 33F Tantalum Capacitor 1206 (3216 Metric) 6.3V; CAP TANT 33UF 6.3V 10% 1206. s: Capacitance: 33F ; Voltage - Rated: 6.3V ; Tolerance: 10% ; : General Purpose ; Operating Temperature: -55C ~ 125C ; Lead Spacing: - ; ESR (Equivalent Series Resistance): 2.000 Ohm ; Lifetime @ Temp.: - ; Mounting Type: Surface Mount ; Type: Conformal Coated ; Package.

FKP1R011004B00KSSD : Pulse Film Capacitors 1250V .001uF 10% PCM15. s: Manufacturer: WIMA ; Product Category: Pulse Film Capacitors ; RoHS:  Details ; Capacitance: 1000 pF ; Tolerance: 10 % ; Voltage Rating: 1.25 KVolts ; Series: FKP1 ; Dimensions: 5 mm W x 18 mm L x 11 mm H ; Lead Spacing: 15 mm ; Termination Style: Radial ; Operating Temperature Range: - 55 C to + 100 C ; Dissipation.

H3AAT-10102-Y8-ND : Jumpers, Pre-crimped Wire Cable Assembly 2.0" (50.8mm); JUMPER-H1506TR/A3048Y/H1506TR 2". s: Contact Finish: Tin ; Color: Yellow ; Length: 2.0" (50.8mm) ; Wire Gauge: 28 AWG ; Contact End: Pin to Pin ; Number of Rows: 1 ; Number of Conductors: 1 ; Contact Finish Thickness: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

ADZS-21364-EZLITE : General Embedded Dev Board And Kit (mcu, Dsp, Fpga, Cpld) Programmers, Development System; KIT EVAL EZ LITE ADDS-21364. s: Type: DSP ; Contents: Evaluation Board, Software and Documentation ; For Use With/Related Products: ADSP-21364 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

DM1-4805-S : Ac Dc Converter Power Supply - External/internal (off-board); PWR SPLY 240W 5A 48VDC DIN-RAIL. s: Number of Outputs: 1 ; Power (Watts): 240W ; Voltage - Output: 48V ; Voltage - Input: 90 ~ 264VAC ; Power Supply Type: Switching (Closed Frame) ; Output - 1 @ Current (Max): 48 VDC @ 5A ; Output - 2 @ Current (Max): - ; Output - 3 @ Current (Max): - ; Output.

RCL12251R07FKEG : 1.07 Ohm 2W Chip Resistor - Surface Mount; RES 1.07 OHM 2W 1% 1225 WIDE. s: Resistance (Ohms): 1.07 ; Power (Watts): 2W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

RNF12FTD11K5 : 11.5K Ohm 0.5W, 1/2W Through Hole Resistors; RES 11.5K OHM 1/2W 1% AXIAL. s: Resistance (Ohms): 11.5K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Metal Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

270HX : Chassis Mount Power Transformer 176 VA; TRANSFORMR 2 FILMNT 275VCT 176VA. s: Mounting Type: Chassis Mount ; Type: Standard ; Primary Winding(s): Single ; Secondary Winding(s): Triple, Center Tap ; Series Output Voltage @ Current: - ; Parallel Output Voltage @ Current: - ; Maximum Power: 176 VA ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

MPC5606SCLQ6 : 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP144. s: Life Cycle Stage: ACTIVE ; Clock Speed: 16 MHz ; ROM Type: Flash ; Supply Voltage: 3 to 3.6 volts ; I/O Ports: 104 ; Package Type: LFQP, Other, 20 X 20 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, ROHS COMPLIANT, LQFP-144 ; Operating Range: Industrial ; Pin Count: 144 ; Operating Temperature: -40 to 85 C (-40.

RJ805030UY800512 : 32-BIT, 800 MHz, MICROPROCESSOR, PBGA479. s: Data Bus: 64-Bit ; Supply Voltage: 1.1 ; Package Type: Other, MICRO, FCBGA-479 ; Pin Count: 479 ; Clock Speed: 100 MHz.

SBR5125 : 10 MHz - 100 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER. s: Amplifier Type: Power Amplifier ; Applications: RF Microwave ; Frequency Range: 10 to 100 MHz ; Minimum Gain: 19.5 dB ; Input VSWR: 2.2 1 ; Output VSWR: 2.2 1 ; Package Type: Connectorized, H2, TO-8B ; Operating Temperature: -55 to 85 C (-67 to 185 F).

SPR3CT521R333G : RESISTOR, CARBON FILM, 3 W, 2 %, 350 ppm, 33000 ohm, THROUGH HOLE MOUNT. s: Category / Application: General Use ; Technology / Construction: CarbonFilm ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED, ROHS COMPLIANT ; Resistance Range: 33000 ohms ; Tolerance: 2 +/- % ; Temperature Coefficient: 350 ±ppm/°C ; Power Rating: 3 watts (0.0040.

72V73260BBG : TELECOM, DIGITAL TIME SWITCH, PBGA144. s: Supply Voltage (VS): 3.3 volts ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Number of Pins: 144 ; Package Type: 13 X 13 MM, 1 MM PITCH, PLASTIC, BGA-144 ; Standards and Certifications: RoHS.

 
0-C     D-L     M-R     S-Z