|Description||64K X 32, 64 Pin Sim Module, Available With Solder or Gold Leads|
|Company||Accutek Microcircuit Corporation|
|Datasheet||Download AK63264AW-12 datasheet
The Accutek AK63264A SRAM Module consists of fast high performance SRAMs mounted on a low height, 64 pin SIM or ZIP Board. The module utilized four 32 pin x 8 SRAMs in 300 mil SOJ packages and four decoupling capacitors mounted on the front side of a printed circuit board. The SRAMs used have common I/O functions and single output enable functions. Also, four separate chip select (CE) connections are used to independently enable the four bytes. The modules can be supplied in a variety of access time values from 35nSEC in CMOS or BiCMOS technology. The Accutek module is designed to have a maximum seated height of 0.600 inch to provide for the lowest height off the board. Each conforms to JEDEC-standard sizes and pin-out configurations. Using two pins for module density identification, PD0 and PD1, minimizes interchangeability and design considerations when changing from one module size to the other in customer applications.
Upward compatible with ( AK632512) and 1 Meg 32 (AK6321024) Fast access times from 12 nSEC TTL-compatible inputs and outputs Single +5 Volt (10%) power supply Operations free air temperature to 700CFEATURES
x 32 bit organization JEDEC Standard 64 pin SIM or ZIP format Common I/O, single OE fucntions with four separate chip selects (CE) Low height, 0.600 inch maximum Presence Detect, PD0 and PD1 for identifying module density Downard compatible with 32 (AK63232W)
Timing Diagrams and basic electrical characteristics are those of the standard x 8 SRAMs used to construct these modules. Accutek's module design allows the flexibility of selecting industry-compatible x 8 SRAMs from several semiconductor manufacturers.
- PD1 Vcc Vss WE NC Address Inputs Chip Enable Data In/Data Out Output Enable Presence Detect 5v Supply Ground Write Enable No ConnectORDERING INFORMATION PART NUMBER CODING INTERPRETATION
Product AK = Accutek Memory Type 4 = Dynamic RAM 5 = CMOS Dynamic RAM 6 = Static RAM Organization/Word Width by 9 Size/Bits Depth = 4 MEG = 8 MEG = 1 MEG = 16 MEG Package Type G = Single In-Line Package (SIP) S = Single In-Line Module (SIM) D = Dual In-Line Package (DIP) W =.050 inch Pitch Edge Connect Z = Zig-Zag In-Line Package (ZIP) Special Designation P = Page Mode N = Nibble Mode K = Static Column Mode W = Write Per Bit Mode V = Video Ram Separator - = Commercial M = Military Equivalent Screened I = Industrial Temperature Tested X = Burned In Speed (first two significant digits) DRAMS SRAMS 15 nS
The numbers and coding on this page do not include all variations available but are show as examples of the most widely used variations. Contact Accutek if other information is required.
ACCUTEK MICROCIRCUIT CORPORATION BUSINESS CENTER at NEWBURYPORT 2 NEW PASTURE ROAD, SUITE 1 NEWBURYPORT, MA 01950-4054 VOICE: 978-465-6200 FAX: 978-462-3396 Email: email@example.com Internet: www.accutekmicro.com
Accutek Reserves the right to make changes in specifications at any time and without notice. Accutek does not assume any responsibility for the use of any circuitry described; no circuit patent licenses are implied. Preliminary data sheets contain minimum and maximum limits based upon design objectives, which are subject to change upon full characterization over the specific operating conditions.
|Some Part number from the same manufacture Accutek Microcircuit Corporation|
|AK63264BZ 64K X 32, 64 Pin Zip Module|
|AK63264W 64K X 32, 64 Pin Sim Module, Available With Solder or Gold Leads|
|AK63264W-72 64K X 32, 72 Pin Sim Module, Available With Solder or Gold Leads|
|AK63264Z 64K X 32, 64 Pin Sim Module, Available With Solder or Gold Leads|
|AK681024G 1 Meg X 8, 36 Pin Sip Module|
|AK68512D 512K X 8, 32 Pin Dip Module|
|AK68PLCC-PGA 100 Pin PLCC to Pin Grid Array|
|AKB083220 8 Pin Tsop to Soic|
|AK6164Z 65,536 x 32 Bit Cmos/bicmos Static Random Access Memory|
|AK04D300-SOT 4 Pin to 14 Pin DIP Adapters|
|AK53664D 65,536 x 32 Bit Cmos/bicmos Static Random Access Memory|
|AK68DS1200-PLCC 64 Pin to 84 Pin DIP Adapters|
|AK6464G 65,536 x 32 Bit Cmos/bicmos Static Random Access Memory|