Radiation Hardened & ESD Protected 64-Channel Analog Multiplexer Module
Full Military Temperature Range Low Power Consumption 90mW 64 Channels Provided by Four (4) HS-1840RH Multiplexers Two Address Busses & B0-3), and Four Enable lines afford flexible organization All Channel Inputs protected by ±20V Transorbs LE F Fast Access Time 1500ns ±35V Input Over Voltage Protection (Power On or Off) Break-Before-Make Switching 9001 High Analog Input Impedance (Power On or Off) E RT IFIE D Dielectrically Isolated Device Islands No Latch-Up Packaging Hermetic Ceramic Quad Flat Pack
· 96 Leads, 1.32"Sq x.20"Ht Quad Flat Pack· Typical Weight 15 grams
Aeroflex's is a radiation hardened, multi-chip 64 channel multiplexer MCM (multi-chip module) with ESD protection for use in space applications. All channel inputs have electrostatic discharge protection. The ACT8501 has been specifically designed to meet exposure to radiation environments. The multiplexer is available a 96 lead High Temperature Co-Fired Ceramic (HTCC) Quad Flatpack (QFP) and is guaranteed operational from to +125°C. Available screened in accordance with MIL-PRF-38534, the ACT8501 is ideal for demanding military and space applications.
eroflex Circuit Technology Multiplexer Modules For The Future © SCD8501 REV A 10/26/01
The ACT8501 consists of four 16 channel muxes arranged as shown in the Block Diagram. The ACT8501 design is inherently Radiation Hard due to the HS1840RH Multiplexers as well as Microsemi Corp. Transient Suppressors (Reference Microsemi MicroNotes Series 050 page 14). A Section Thirty-two channels addressable by Bus A0~A3, in two 16 channel blocks, each block enabled separately. B Section Thirty-two (32) channels addressable by Bus B0~B3, in two 16 channel blocks, each block enabled separately.
NOTE: It is recommended that all "NC or "no connect pin", be grounded. This eliminates or minimizes any ESD or static buildup.