Details, datasheet, quote on part number: 4518A
Part4518A
Category
DescriptionWideband Photodiode Receivers
CompanyAgere Systems
DatasheetDownload 4518A datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Features

Wide-band analog signal reception Single-mode fiber pigtail High optical return loss to 20 GHz bandwidth 1310 nm and 1550 nm sensitivity

Applications
Antenna remoting Cellular and PCS networks Military triband communications TT and C
Description

The family of wideband photodiode receivers are ideally suited for use in analog fiber-optic communications. With their wide bandwidth and flat response, these devices are used in a wide array of applications, including antenna remoting, timing and reference signal distribution, measurement, delay lines, and two-way communications. Several packaging styles are available for these wideband photodiodes. The most basic package, the photodiode module, contains the photodiode chip, optical fiber pigtail, and impedance-matched electrical connections in a hermetically sealed unit. Of particular note is the high optical return loss, which enables high-quality noise performance for sensitive optical links.

for integration with Agere Systems Inc.'s System 10000 rack-mountable chassis and power supplies. Electronics within flange-mount and plug-in receivers provide a reverse bias for the photodiodes and monitor the dc level of the optical input power, thus providing a fully integrated wideband product.

In most cases, the basic photodiode module is integrated into a complete receiver, packaged either as a flange-mount for extreme environments, as a plug-in

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter Operating Temperature Range: Modules and Flange-mount Plug-ins Storage Temperature Range: Modules and Flange-mount Plug-ins Input Power: 1516A/B/C 2518A/B Maximum Power for 2518A/B dc Current: 1516A/B/C 2518A/B Symbol TOP 40 0 Tstg 40 20 PIN 2.0 (typ) 15 PMAX Idc 50 C Min Max Unit

Package Type Module Flange-Mount Receiver Plug-in Receiver, for 19 in. rack system Parameters dc Photodiode Responsivity at 1310 nm, C RF Receiver Efficiency (typ) at 1 GHz 2 Optical Return Loss3 Pigtail Fiber Type (where applicable) >0.75 A/W 4510A/B1 10450A/B1 Device Code 4518A/B 10458A/B

1. Specified for <2 mW optical power, <50% modulation depth. 2. The photodiode RF current splits evenly between the internal matching resistor and the external load. (See Agere Systems' System Designer's Guide to RF and Wideband Fiber Optics.) 3. Optical return loss specified for FC-APC connectors or fusion splices only. Other connection methods can degrade optical return loss. is a trademark of Corning Incorporated.

Table 2. RF Characteristics Package Type Module Flange-Mount Receiver Plug-in Receiver (for 19 in. rack system) Parameters Maximum Frequency: A Version B Version C Version Minimum Frequency Output Coupling Amplitude Flatness1 Output VSWR, Max 2.0:1 2.5:1 Output Impedance RF Connector for Module RF Connector for FlangeMount and Plug-in SMA (F) SMA (F) 3 GHz 6 GHz 0.1 GHz dB 0.1--6 GHz 4510A/B 10450A/B Device Code 4518A/B 10458A/B

1. Relative to value at 1 GHz. 2. K-connector is a trademark of Anritsu Company. is a high-speed and SMA-compatible connector.

Table 3. dc Power for Flange-mount and Plug-ins (45xx and 104xx Receivers) Parameter

1. For photodiode module CDC requirements, contact an Agere Systems' account manager for OEM data sheet.


 

Related products with the same datasheet
10450B
10455A
10455B
10455B1
10456A
10456B
10456C
10458A
10458B
2510A
2510B
2515A
Some Part number from the same manufacture Agere Systems
4518B Wideband Photodiode Receivers
4802 Battery Plant;economical Power Solution (eps)
4802B Economical Power Solution;-48v Battery Plant
5000 5000-Series Fiber-optic Delay Line
500DSeries Ecs Battery Plant 48v Output, 300 a Maximum
500ESeries Ecs Battery Plant 24v Output 1200 a Maximum
500GSeries Ecs Battery Plant 48v Output, 600 a Maximum
5100 5100-Series If-band And L-band Fiber-optic Links
5200 64 X 64 Mems Optical Switch Module
5833P 5833P Diplexer, Full-Duplex, Bidirectional, Single-Fiber, Data And Voice Transceivers
595Series Model 595a: -48vdc, 200 ADC, 380/400/480vac Model 595b: -48vdc, 200 ADC, 208/220/240vac
596BSeries Galaxy Switchmode Rectifier +24vdc, 100 ADC, 208vac/240vac
596Series Model 596a: -48vdc, 50 ADC, 208vac/240vac Model 596b: +24vdc, 100 ADC, 208vac/240vac
660 Power Modules: DCDC Constant Current Converters; 48 VDC Inputs
660-Series 2 Power Modules: DC-DC Constant Current Converters; 48 VDC Inputs
68KRISC 68k Risc Embedded 32-bit Risc Microprocessor (functionally Equivalent to Mcf5202/03)
700B Power Module: Custom DCDC Converter 5vdc Input; 24 V to 97 V Adjustable Output; 0.1 W
7810 7810 Video Receiver Module
8000 System 8000 Fiber-optic Interfacility Links
80C31 80c31/32/51/52 8-bit Microcontroller
80C32

1740A : Wideband DFB Laser Transmitters

269-C-250-F1480-C : 269-Type 14xx NM Pump Laser Module With Fiber Grating

A1751A21FFFC08 : Laser Module->Industrial Analog DWDM Laser Module

A1751A27RRSC10 : Laser Module->Industrial Analog DWDM Laser Module

A1751A33FFSC10 : Laser Module->Industrial Analog DWDM Laser Module

D2547P871 : Wavelength-selected High-power D2587P-Type (with Wavelength Locker) / D2547P-Type ISOlated DFB Laser Module

T7237 : Isdn U-interface Transceiver

OR3T20-7S208I : 3C and 3T Field-programmable Gate Arrays

DS99144 : QUAD Differential Drivers

OR3C80-4PS240I : 3C and 3T Field-programmable Gate Arrays

 
0-C     D-L     M-R     S-Z