|
|
Part: 6N135020
Category:
Optoelectronics
-> Optocouplers
Description:
Company: Agilent Technologies, Inc.
Datasheet: Download 6N135020 datasheet File size : 341 kB
Request For quote: Find where to buy 6N135020
Datasheet text preview:
Single Channel, High Speed Optocouplers Technical Data
6N135/6 HCNW135/6 HCNW4502/3 HCPL-2502 HCPL-0452/3 HCPL-0500/1 HCPL-4502/3
Features
· 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453) · High Speed: 1 Mb/s · TTL Compatible · Available in 8-Pin DIP, SO-8, Widebody Packages · Open Collector Output · Guaranteed Performance from Temperature: 0°C to 70°C · Safety Approval UL Recognized 2500 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved VDE 0884 Approved VIORM = 630 V peak for HCPL-4503#060 VIORM = 1414 V peak for HCNW devices · Dual Channel Version Available (253X/4534/053X/ 0534) · MIL-STD-1772 Version Available (55XX/65XX/4N55)
Applications
· High Voltage Insulation · Video Signal Isolation · Power Transistor Isolation in Motor Drives · Line Receivers · Feedback Element in Switched Mode Power Supplies · High Speed Logic Ground Isolation TTL/TTL, TTL/ CMOS, TTL/LSTTL · Replaces Pulse Transformers · Replaces Slow Phototransistor Isolators · Analog Signal Ground Isolation
Description
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.
Functional Diagram
NC 1 ANODE 2 CATHODE 3 NC 4 8 VCC * 7 VB 6 VO 5 GND TRUTH TABLE (POSITIVE LOGIC) LED O LVO ON FF HOW IGH
* NOTE: FOR 4502/3, 0452/3, PIN 7 IS NOT CONNECTED.
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.
2
These single channel optocouplers are available in 8-Pin DIP, SO-8 and Widebody package configurations. The 6N135, HCPL-0500, and HCNW135 are for use in TTL/ CMOS, TTL/LSTTL or wide bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA. The 6N136, HCPL-2502, HCPL-0501, and HCNW136 are designed for high speed TTL/TTL applications. A standard 16 mA TTL sink current through the input LED will provide enough
output current for 1 TTL load and a 5.6 k pull-up resistor. CTR for these devices is 19% minimum at I F = 16 mA. The HCPL-4502, HCPL-0452, and HCNW4502 provide the electrical and switching performance of the 6N136, HCPL-0501, and HCNW136 with increased ESD protection. The HCPL-4503, HCPL-0453, and HCNW4503 are similar to the HCPL-4502, HCPL-0452, and HCNW4502 optocouplers but have increased common mode transient immunity of 15 kV/µs minimum at VCM = 1500 V guaranteed.
Schematic
2 ANODE + VF CATHODE 3 H SHIELD CPL-4503/0453 H CNW4503 IF
ICC
8
VCC
IO
6
VO
5
GND
IB 7* VB
* NOTE: FOR HCPL-4502/-3, HCPL-0452/3, HCNW4502/3, PIN 7 IS NOT CONNECTED.
Selection Guide
Minimum CMR dV/dt (V/µs) 1,000 VCM (V) 10 Current Transfer Ratio (%) 7 19 15 15,000 1,000 1500 10 19 9 8-Pin DIP (300 Mil) Single Channel Package 6N135 6N136 HCPL-4502 HCPL-2502 HCPL-4503 Dual Channel Package* HCPL-2530 HCPL-2531 Small-Outline SO-8 Single Channel Package HCPL-0500 HCPL-0501 HCPL-0452 HCPL-0453 Dual Channel Package* HCPL-0530 HCPL-0531 Widebody (400 Mil) Hermetic Single Single and Channel Dual Channel Package Packages* HCNW135 HCNW136 HCNW4502 HCNW4503 HCPL-55XX HCPL-65XX 4N55
HCPL-4534
HCPL-0534
*Technical data for these products are on separate Agilent publications. Pin 7, transistor base, is not connected.
Ordering Information
Specify Part Number followed by Option Number (if desired). Example: HCPL-4503#XXX 020 = UL 5000 V rms/1 Minute Option* 060 = VDE 0884 VIORM = 630 V peak Option** 300 = Gull Wing Surface Mount Option 500 = Tape and Reel Packaging Option Option data sheets available. Contact your Agilent sales representative or authorized distributor for information.
*For 6N135/6 and HCPL-4502/3 only. **For HCPL-4503 only. Combination of Option 020 and Option 060 is not available. Gull wing surface mount option applies to through hole parts only.
3
Package Outline Drawings
8-Pin DIP Package (6N135/6, HCPL-4502/3, HCPL-2502)
9.65 ± 0.25 (0.380 ± 0.010) TYPE NUMBER 8 7 6 5 7.62 ± 0.25 (0.300 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010)
OPTION CODE* DATE CODE
A XXXXZ Y YWW RU 1 1.19 (0.047) MAX. 2 3 4
R UL ECOGNITION
1.78 (0.070) MAX. + 0.076 0.254 - 0.051 + 0.003) (0.010 - 0.002)
5° TYP. 4.70 (0.185) MAX.
0.51 (0.020) MIN. 2.92 (0.115) MIN. DIMENSIONS IN MILLIMETERS AND (INCHES). * MARKING CODE LETTER FOR OPTION NUMBERS. "L" = OPTION 020 "V" = OPTION 060 OPTION NUMBERS 300 AND 500 NOT MARKED.
1.080 ± 0.320 (0.043 ± 0.013)
0.65 (0.025) MAX. 2.54 ± 0.25 (0.100 ± 0.010)
8-Pin DIP Package with Gull Wing Surface Mount Option 300 (6N135/6, HCPL-4502/3)
PAD LOCATION (FOR REFERENCE ONLY) 9.65 ± 0.25 (0.380 ± 0.010)
8 7 6 5
1.016 (0.040) 1.194 (0.047)
(4.826 YP. 0.190)T 6.350 ± 0.25 (0.250 ± 0.010) 9.398 (0.370) 9.906 (0.390)
1
2
3
4
1.194 (0.047) 1.778 (0.070) (1.780 0.070) M AX. 9.65 ± 0.25 (0.380 ± 0.010) 7.62 ± 0.25 (0.300 ± 0.010)
0.381 (0.015) 0.635 (0.025)
( 1.19 0.047) M AX.
( 4.19 MAX. 0.165)
+ 0.076 0.254 - 0.051 + 0.003) (0.010 - 0.002)
1.080 ± 0.320 (0.043 ± 0.013) 0.635 ± 0.130 ( 2.54 (0.025 ± 0.005) 0.100) B SC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.25 (0.025 ± 0.010)
12° NOM.
4
Small Outline SO-8 Package (HCPL-0500/1, HCPL-0452/3)
8 7 6 5
3.937 ± 0.127 (0.155 ± 0.005)
Y XX X WW
5.994 ± 0.203 (0.236 ± 0.008) TYPE NUMBER (LAST 3 DIGITS) DATE CODE
4
PIN ONE 1 0.406 ± 0.076 (0.016 ± 0.003)
2
3
(1.270 BSG 0.050) * 5.080 ± 0.127 (0.200 ± 0.005) 7° (0.432 0.017)
45° X
3.175 ± 0.127 (0.125 ± 0.005)
0 ~ 7° (1.524 0.060) 0.203 ± 0.102 (0.008 ± 0.004)
0.228 ± 0.025 (0.009 ± 0.001)
* TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010) D IMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
(0.305 MIN. 0.012)
8-Pin Widebody DIP Package (HCNW135/6, HCNW4502/3)
11.15 ± 0.15 (0.442 ± 0.006)
8 7 6 5
(11.00 MAX. 0.433) 9.00 ± 0.15 (0.354 ± 0.006) TYPE NUMBER
H
A CNWXXXX Y YWW
DATE CODE
1
2
3
4
( 1.55 0.061) M AX.
10.16 (0.400) TYP. 7° TYP. + 0.076 0.254 - 0.0051 + 0.003) (0.010 - 0.002) ( 5.10 MAX. 0.201)
3.10 (0.122) 3.90 (0.154) 2.54 (0.100) TYP. 1.78 ± 0.15 (0.070 ± 0.006) 0.40 (0.016) 0.56 (0.022)
0.51 (0.021) MIN.
DIMENSIONS IN MILLIMETERS (INCHES).
5
8-Pin Widebody DIP Package with Gull Wing Surface Mount Option 300 (HCNW135/6, HCNW4502/3)
11.15 ± 0.15 (0.442 ± 0.006)
8 7 6 5
PAD LOCATION (FOR REFERENCE ONLY)
( 6.15 0.242)TYP. 9.00 ± 0.15 (0.354 ± 0.006) 12.30 ± 0.30 (0.484 ± 0.012)
1 2 3 4
( 1.3 0.051) ( 1.55 0.061) M AX. 12.30 ± 0.30 (0.484 ± 0.012) (11.00 MAX. 0.433)
( 0.9 0.035)
( 4.00 MAX. 0.158)
1.78 ± 0.15 (0.070 ± 0.006) ( 2.54 0.100) B SC 0.75 ± 0.25 (0.030 ± 0.010)
1.00 ± 0.15 (0.039 ± 0.006)
+ 0.076 0.254 - 0.0051 + 0.003) (0.010 - 0.002) 7° NOM.
DIMENSIONS IN MILLIMETERS (INCHES). L EAD COPLANARITY = 0.10 mm (0.004 INCHES).
Solder Reflow Temperature Profile (HCPL-0500/1, HCPL-0452/3, and Gull Wing Surface Mount Option Parts)
260 240 220 200 180 160 140 120 100 80 60 40 20 0 0 T = 145°C, 1°C/SEC T = 115°C, 0.3°C/SEC
TEMPERATURE °C
T = 100°C, 1.5°C/SEC
1
2
3
4
5
6
7
8
9
10
11
12
TIME MINUTES
Note: Use of Non-Chlorine Activated Fluxes is Recommended.
Others parts begin by 6n
6N-1
|
|
|
