|
|
Part: HLMP-KB45-N0002
Category:
Optoelectronics
-> Display
-> LEDs
-> LED Lamps
Description: T-1 (3 MM) Blue Led Lamp
Company: Agilent Technologies, Inc.
Datasheet: Download HLMP-KB45-N0002 datasheet File size : 117 kB
Request For quote: Find where to buy HLMP-KB45-N0002
Datasheet text preview:
T-13/4 (5 mm), T-1 (3 mm) Blue LED Lamps Technical Data
Features
· Popular T-13/4 and T-1 Diameter Packages · General Purpose Leads · Reliable and Rugged · Available on Tape and Reel · Binned for Color and Intensity
HLMP-DB25-P00xx HLMP-KB45-N00xx Description
These blue LEDs are designed in industry standard T-1 and T-13/4 package with clear and non diffused optics. They are also available in tape and reel, and ammo-pack option for ease of handling and use. These blue lamps are ideal for use as indicators and for general purpose lighting. Blue lamps offer color differentiation as blue is attractive and not widely available.
5.08 (0.200) 4.57 (0.180)
Applications
· Status Indicators · Small Message Panel · Running and Decorative Lights for Commercial Use
Package Dimensions
3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115)
9.19 (0.352) 8.43 (0.332)
6.35 (0.250) 5.58 (0.220)
4.70 (0.185) 4.19 (0.165)
0.89 (0.035) 0.64 (0.025) (23.0 0.90) MIN. 0.45 (0.018) SQUARE NOMINAL
1.02 (0.040) NOM. (23.0 MIN. 0.90)
CATHODE
0.45 (0.018) SQUARE NOM.
1.27 (0.050) NOM. 6.10 (0.240) 5.59 (0.220) CATHODE 2.54 (0.100) NOM.
1.27 (0.050) NOM.
2.54 (0.100) NOM.
HLMP-KB45
HLMP-DB25
1 NOTES: . ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS.
CAUTION: Devices are Class II ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details.
2
Selection Guide
Luminous Intensity Iv (mcd) Part Number HLMP-KB45-N00xx HLMP-DB25-P00xx Package T-1 T-1 3/4 Viewing Angle 40 25 Min. 25 40 Max.
Part Numbering System
H L M P - x x xx - x x x xx Mechanical Option 00: Bulk 02: Tape & Reel, Straight Leads DD: Ammo Pack Color Bin Options 0: Full Color Bin Distribution Maximum Iv Bin Options 0: Open (no max. limit) Minimum Iv Bin Options Please refer to the Iv Bin Table Viewing Angle 25: 25 degrees 45: 40 degrees Color Options B: Blue 462 nm Package Options D: T-1 3/4 (5 mm) K: T-1 (3 mm)
Absolute Maximum Ratings at TA = 25°C
Parameter Peak Forward Current DC Current[1] Reverse Voltage (IR = 100 µA) Transient Forward Current[2] (10 µsec Pulse) LED Junction Temperature Operating Temperature Storage Temperature Lead Soldering Temperature [1.6 mm (0.063 in.) from body] Blue 70 30 5 350 115 20 to +80 30 to +100 Units mA mA V mA °C °C °C
260°C for 5 seconds
Notes: 1. Derate linearly from 50 °C as shown in Figure 6. 2. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that this device be operated at peak currents above the Absolute Maximum Peak Forward Current.
3
Optical Characteristics at TA = 25°C
Luminous Intensity IV (mcd) @ IF = 20 mA Min. Typ. 40 100 25 45 Color, Dominant Wavelength d[1] (nm) Typ. 462 462 Peak Wavelength PEAK (nm) Typ. 426 426 Viewing Angle 21/2 [2] Degrees Typ. 25 40
Part Number HLMP-DB25-P00xx HLMP-KB45-N00xx
Notes: 1. The dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 2. 1/2 is the off-axis angle at which the luminous intensity is half of the axial luminous intensity.
Electrical Characteristics at TA = 25°C
Forward Reverse Voltage Breakdown VF (Volts) VR (Volts) @ IF = 20 mA @ IR = 100 µA Typ. Max. Min. Typ. 4.0 4.0 5.0 5.0 5.0 5.0 30 30 Thermal Resistance Capacitance RJ-PIN (°C/W) C (pF), VF = 0, Junction to f = 1 MHz Cathode Lead Typ. Typ. 97 97 260 290
Part Number HLMP-DB25-P00xx HLMP-KB45-N00xx
Speed Response s (ns) Typ. 500 500
1.0
IF FORWARD CURRENT mA
60 50 40 30 20 10 0
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
1.6
RELATIVE INTENSITY
1.4
0.5
1.2
0 350 400 450 500 550 600 650 700 WAVELENGTH nm
0
1
2
3
4
5
1.0 20
30
40
50
60
70
80
VF FORWARD VOLTAGE V
IP PEAK FORWARD CURRENT mA
Figure 1. Relative Intensity vs. Wavelength.
Figure 2. Forward Current vs. Forward Voltage.
Figure 3. Relative Intensity vs. Peak Forward Current (300 µs pulse width, 10 ms period).
Others parts begin by hl
HL-1 HL-2 HL-3 HL-4 HL-5 HL-6 HL-7 HL-8 HL-9 HL-10 HL-11 HL-12 HL-13 HL-14 HL-15 HL-16
|
|
|
