|
Details, datasheet, quote on part number:HLMT-PH00-P0011
| |
Datasheet text preview:
Subminiature High Performance AlInGaP LED Lamps Technical Data
SunPower Series HLMA-PF00 HLMT-PG00 HLMA-PG00 HLMT-PH00 HLMA-PH00 HLMT-PL00 HLMA-PL00 HLMT-QG00 HLMA-QF00 HLMT-QH00 HLMA-QG00 HLMT-QL00 HLMA-QH00 HLMA-QL00
Features
· Subminiature Flat Top Package Ideal for Backlighting and Light Piping Applications · Subminiature Dome Package Nondiffused Dome for High Brightness · Wide Range of Drive Currents · Colors: 590 nm Amber, 605 nm Orange, 615 nm Reddish-Orange, 626 nm Red, and 635 nm Red · Ideal for Space Limited Applications · Axial Leads · Available with Lead Configurations for Surface Mount and Through Hole PC Board Mounting
Dome Packages The HLMX-QXXX dome lamps use an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern. Lead Configurations All of these devices are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead, or Z-bend. Right angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm (0.200 inch) center spacing are available for through hole mounting. For more information refer to Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps data sheet.
Description
Flat Top Package The HLMX-PXXX flat top lamps use an untinted, nondiffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top lamps are also ideal for use as emitters in light pipe applications.
Technology These subminiature solid state lamps utilize one of the two newly developed aluminum indium gallium phosphide (AlInGaP) LED technologies, either the absorbing substrate carrier technology (AS = HLMADevices) or the transparent substrate carrier technology (TS = HLMT-Devices). The TS HLMT-Devices are especially effective in very bright ambient lighting conditions. The colors 590 nm amber, 605 nm orange, 615 nm reddish-orange, 626 nm red, and 635 nm red are available with viewing angles of 15° for the domed devices and 125° for the flat top devices.
2
Device Selection Guide
Part Number HLMA-QL00 HLMT-QL00 HLMA-QJ00 HLMA-QH00 HLMT-QH00 HLMA-QG00 HLMT-QG00 HLMA-QF00 HLMA-PL00 HLMT-PL00 HLMA-PJ00 HLMA-PH00 HLMT-PH00 HLMA-PG00 HLMT-PG00 HLMA-PF00 d (nm) 590 590 605 615 615 626 626 635 590 590 605 615 615 626 626 635 Typ. Iv (mcd) 500 1000 500 500 800 500 1000 500 75 150 75 75 120 75 150 75 Flat Top, Nondiffused, Untinted 125° A Package Description Domed, Nondiffused, Untinted Viewing Angle 21/2 15 ° Package Outline B
3
Part Numbering System
H L M x - x x 00 - x x x xx Packaging Option 00: Straight Leads, Bulk Packaging, Quantity of 500 parts 11: Gull Wing Bend, Tape & Reel 7" Reel 12: Gull Wing Bend, Bulk 14: Gull Wing Bend, Tape & Reel 13" Reel 21: Yoke Bend, Tape and Reel 7" Reel 22: Yoke Bend, Bulk 24: Yoke Bend, Tape and Reel 13" Reel 31: Z-Bend, Tape and Reel 7" Reel 32: Z-Bend, Bulk 34: Z-Bend, Tape and Reel 13" Reel Color Bin Selection 0: Full Color Bin Distribution B: Color Bins 3 & 4 K: Color Bins 2, 3 & 4 R: Color Bins 2 & 4 W: Color Bins 2, 4, 6 & 7 X: Color Bins 4, 6 & 7 Maximum Iv Bin Options Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Color Options L: Amber 590 nm J: Orange 605 nm H: Reddish Orange 615 nm G: Red 626 nm F: Red 635 nm Package Options Q: Dome P: Flat Top Dice Options A: AS AlInGaP T: TS AlInGaP
|
|
