Details, datasheet, quote on part number: AK4309BVM
CompanyAKM Semiconductor, Inc.
DatasheetDownload AK4309BVM datasheet
Find where to buy


Features, Applications

General Description The a 1bit stereo DAC for multimedia audio systems. A 1bit DAC can achieve monotonicity and low distortion with no adjustment and is superior to traditional R-2R ladder based DACs. In the AK4309B, the loss of accuracy from clock jitter is also improved by using SCF techniques for on-chip post filter. The AK4309B includes continuous time filter with single end output and does not need any external parts. The master clock can be either or 384fs, supporting various audio environment. Features

Sampling Rate Ranging from 50kHz On chip Perfect filtering 8 times FIR Interpolator 2nd order SCF and CTF Total Response: 20kHz On chip Buffer with Single End Output Master Clock: or 384fs High Tolerance to Clock Jitter TTL Level Digital Interface THD+N: -84dB Dynamic Range: 90dB Output Level: 3.4Vpp Power Supply: 5Vą10% Low Power Dissipation: at 5V Small Package: 20pin SSOP Pin Compatible with AK4310/4309A

Parameter Power Supply Digital I/F level DR Output Voltage Click Noise Function of Pin 4 Package

PIN/FUNCTION No. Pin Name TST1 DVDD DVSS NC I/O I Function Test Pin (Pull-down pin) Must be left floating or tied to DVSS. Digital Power Supply Pin Digital Ground Pin No Connection Reset Pin When at "L", the is in power-down mode and is held in reset. The AK4309B should always be reset upon power-up. Master Clock Input Pin An external TTL clock should be input on this pin. The fs is selected by CKS pin. Master Clock Select Pin "L": MCLK=256fs, "H": MCLK=384fs Serial Bit Input Clock Pin This clock is used to latch SDATA. Serial Data Input Pin 2's complement MSB-first data is input on this pin. L/R Clock Pin This input determines which channel is currently being input on the Serial Data Input pin, SDATA. "H": Lch, "L": Rch analog output pin Lch analog output pin Common Voltage pin, AVDD/2 Normally connected to AVSS with a 0.1uF ceramic capacitor in parallel with a 10uF electrolytic cap. Analog Power Supply Pin Analog Ground Pin No Connection "H" Voltage Reference Input Pin The differential Voltage between VREFH and VREFL inputs set the analog output range. The VREFH pin is normally connected to AVDD and the VREFL pin is connected to AVSS. A 0.1uF ceramic capacitor should be as near to both pins. "L" Voltage Reference Input Pin Zero Input Detect Pin When SDATA of both channels follow a total 8192 LRCK cycles with "0" input data, this pin goes "H".


Some Part number from the same manufacture AKM Semiconductor, Inc.
AK4352 2V & Low Power Multi-bit DAC
AK4356 192kHz 24bit Six-channel DAC For Dvd-audio
AK4358 - 8-channel 112dB DAC For Pcm, DSD
AK4359 8-channel, 24-bit DAC For DVD-Audio, TDM Data Format
AK4359 Cost-efficient 8-channel 24-bit D/A Converter For Consumer Dvd/av Equipment
AK4363 96kHz 24bit DAC With PLL
AK4364 96kHz 24bit DAC With PLL And Dit
AK4366 - 24-bit DAC 8-48KHz With 50mW Headphone Amp
AK4367 - 24-bit DAC 8-48KHz With 50mW HP Amp, Mixer
AK4380 100dB 24bit 96kHz 2ch DAC
AK4381 - 192KHz 108dB DAC, Differential Outputs
AK4382 112db 192khz 24-bit SCH DAC
AK4382VT 112db 192khz 24-bit SCH DAC

AK5385A : 114dB 192kHz 24-Bit Enhanced Dual Bit ADC

AK93C75AV :

AK4373 : Low Power Stereo DAC with Hp/spk-amp

AK8133 : Low Suprious Multiclock Generator for Audio

AK93C65CU : 1k/2k/4kbit Serial CMOS Eeprom

AKD5701 : Digital Audio 16bit A/D Converter

AK7746VT : Audio DSP with 5-channel 24-bit ADC and Input Mux

AK93C55BL : 1k/2k/4kbit Serial CMOS Eeprom

AK4121A : Asynchronous Sample Rate Converter

AKD4552 : 24bit A/D and D/A Converter,

0-C     D-L     M-R     S-Z