Details, datasheet, quote on part number: AK6440B
CategoryMemory => ROM => EEPROM
Description2k / 4k / 8kbit Serial CMOS EePROM
CompanyAKM Semiconductor, Inc.
DatasheetDownload AK6440B datasheet
Find where to buy


Features, Applications


ADVANCED CMOS EEPROM TECHNOLOGY Wide Vcc (1.8V 5.5V) operation AK6420B 2048 bits: 16 organization AK6440B 4096 bits: 16 organization AK6480B 8192 bits: 16 organization ONE CHIP MICROCOMPUTER INTERFACE - Interface with one chip microcomputer's serial communication port directly LOW POWER CONSUMPTION - 0.8A Max (Standby mode) HIGH RELIABILITY -Endurance -Data Retention : 100K cycles : 10 years

SPECIAL FEATURES - High speed operation ) - Automatic write cycle time-out with auto-ERASE - Automatic address increment (READ) - Software and Hardware controlled write protection IDEAL FOR LOW DENSITY DATA STORAGE - Low cost, space saving, 8-pin package (MSOP)

General Description The a 2048/4096/8192bit, serial, read/write, non-volatile memory device fabricated using an advanced CMOS E2PROM technology. The AK6420B has 2048bits of memory organized into 128 registers of 16 bits each. The AK6440B has 4096bits of memory organized into 256 registers of 16 bits each. The AK6480B has 8192bits of memory organized into 512 registers of 16 bits each. The AK6420B/40B/80B can operate full function under wide operating voltage range from to 5.5V. The charge up circuit is integrated for high voltage generation that is used for write operation. The AK6420B/40B/80B can connect to the serial communication port of popular one chip microcomputer directly (3 line negative clock synchronous interface). At write operation, AK6420B/40B/80B takes in the write data from data input pin (DI) to a register synchronously with rising edge of input pulse of serial clock pin (SK). And at read operation, AK6420B/40B/80B takes out the read data from a register to data output pin (DO) synchronously with falling edge of SK. The AK6420B/40B/80B has 4 instructions such as READ, WRITE, WREN (write enable) and WRDS (write disable). Each instruction is organized by op-code block (8bits), address block (8bits) and data 2). When input level of SK pin is high level and input level of chip select (CS) pin is changed from high level to low level, AK6420B/40B/80B can receive the instructions. Special features of the AK6420B/40B/80B include : automatic write time-out with auto-ERASE, Ready/Busy status signal output and ultra-low standby power mode when deselected (CS=high).

The AK6420B/40B/80B has 2 (hardware and software) write protection functions. After power on or after execution of WRDS (write disable) instruction, execution of WRITE instruction will be disabled. This write protection condition continues until WREN instruction is executed or Vcc is removed from the part. Execution of READ instruction is independent of both WREN and WRDS instructions. Reset pin should be low level when WRITE instruction is executed. When the Reset pin is high level, the WRITE instruction is not executed.

The DO pin indicates the Busy status. When input level of SK pin is low level and input level of CS pin is changed from high level to low level, the is in the status output mode and the DO pin indicates the Ready/Busy status. The Ready/ Busy status outputs on DO pin until CS pin is changed from low level to high level, or first bit ("1") of op-code of next instruction is given to the part. Except when the device is in the status output mode or outputs data, the DO pin is in the high impedance state. Type of Products Model AK6440BH AK6480BH Memory size 4Kbits 8Kbits Temp.Range -40C85C Vcc 1.8V5.5V Package 8pin Plastic MSOP 8pin Plastic MSOP 8pin Plastic MSOP

Function Chip Select Serial Data Clock Serial Data Input Serial Data Output RESET Input Power Supply Ground Not Connected


Related products with the same datasheet
Some Part number from the same manufacture AKM Semiconductor, Inc.
AK6440BH 2k / 4k / 8kbit Serial CMOS EePROM
AK6480B 2k / 4k / 8kbit Serial CMOS EePROM
AK7714 20-bit Audio Codec With DSP And Delay RAM
AK8811 Ntsc/pal Digital Video Encoder
AK8811-12 - Ntsc/pal Digital Video Encoder
AK8850 Triple 10-bit ADC Video Decoder
0-C     D-L     M-R     S-Z