Details, datasheet, quote on part number: A6118ELW
CategoryInterface and Interconnect
CompanyAllegro Micro Systems, Inc.
DatasheetDownload A6118ELW datasheet
Find where to buy


Features, Applications

Consisting of eight npn Darlington output stages and the associated common-emitter input stages, these drivers are designed to interface between low-level digital logic and vacuum fluorescent displays. Both devices are capable of driving the digits and/or segments of these displays and are designed to permit all outputs to be activated simultaneously. Pull-down resistors are incorporated into each output and no external components are required for most fluorescent display applications. With any device, the output load is activated when the input is pulled towards the positive supply (active `high'). The UDN6118A is furnished in a standard 18-pin plastic DIP; the a 20lead wide-body SOIC. Both units operate over the temperature range to +85C. These devices are also available for operation over the temperature range +85C by changing the part number or A6118ELW.


Supply Voltage, VBB. 85 V Input Voltage, VIN. 20 V Output Current, IOUT. -40 mA Allowable Package Power Dissipation, PD. See Graph Operating Temperature Range, TA. to +85C Storage Temperature Range, TS. to +150C

Caution: The high input impedance of these devices makes them susceptible to static discharge damage associated with handling and testing. Techniques similar to those used for handling MOS devices should be employed.

s Integral Output Pull-Down Resistors s High Output Breakdown Voltage s Single or Split Supply Operation s Automotive Capable

Always order by complete part number, e.g., UDN6118A.

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts (508) 853-5000 Copyright 1977, 2000 Allegro MicroSystems, Inc.

ELECTRICAL CHARACTERISTICS (over operating temperature range) at VBB 80 V.

Characteristic Output Leakage Current Output OFF Voltage Output Pull-Down Current Output ON Voltage Input ON Current Symbol IOUT VOUT IOUT VOUT IIN Test Conditions VIN 0.4 V VIN 0.4 V Input Open, VOUT = VBB VIN 2.4 V, IOUT -25 mA VIN 2.4 V VIN 5.0 V Supply Current IBB All Inputs Open All Inputs 2.4 V Min. 450 77 Limits Typ. Max. Units A mA

Characteristic Supply Voltage Input ON Voltage Output ON Current Symbol VBB VIN IOUT Test Conditions Min. 5.0 2.4 Typ. Limits Max. 15 -25 Units V mA

NOTE: Positive (negative) current is defined as going into (coming out of) the specified device terminal.


Some Part number from the same manufacture Allegro Micro Systems, Inc.
A6118SLW Addressable 28-Line Decoder/driver
A612 Dynamic, Self-Calibrating, Peak-Detecting, Differential Hall-effect Gear-tooth Sensor Module
A6219 Dual Full-bridge PWM Motor Driver
A622 True Zero-speed Hall-effect Gear-tooth Sensor Module
A6259 8-bit Addressable Dmos Power Driver
A6259KA 8-Bit Adressable Dmos Power Driver
A6273 8-bit Latched Dmos Power Driver
A6273KA 15 Microwatt, Ultra-sensitive Hall-effect Switch
A6275 8-bit Serial-input, Constant- Current Latched Led Driver
A6275EA 8-Bit Serial-input,constant-current Latched Led Driver
A6276 16-bit Serial-input, Constant- Current Latched Led Driver
A6276EA 16-Bit Serial-input,constant-current Latched Led Driver
A6277EA 16-Bit Serial-input Latched Constant-current Led Drivers
A643 True Zero-Speed, Two-Wire, Miniature Gear-tooth Sensor
A645 True Zero Speed Miniature Gear-tooth Sensor
A6595 8-bit Serial-input, Dmos Power Driver
A6595KA 8-Bit Serial-input Latched Constant-current Led Drivers
A660 True Zero-Speed, Hall-effect Adaptive Gear-tooth Sensor Module
A665 True Zero-Speed, Hall-effect Adaptive Gear-tooth Sensor
A671 Self-calibrating Tpos Gear-tooth Sensor With 9-Bit Signal Capture
0-C     D-L     M-R     S-Z