Details, datasheet, quote on part number: A6810
PartA6810
CategoryInterface and Interconnect
Description
CompanyAllegro Micro Systems, Inc.
DatasheetDownload A6810 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The A6810 devices combine 10-bit CMOS shift registers, accompanying data latches and control circuitry with bipolar sourcing outputs and pnp active pull downs. Designed primarily to drive vacuumfluorescent displays, the 60 V and -40 mA output ratings also allow these devices to be used in many other peripheral power driver applications. The A6810 feature an increased data input rate (compared with the older UCN/UCQ5810-F) and a controlled output slew rate. The CMOS shift register and latches allow direct interfacing with microprocessor-based systems. With 5 V logic supply, serial-data input rates of at least 10 MHz. A CMOS serial data output permits cascade connections in applications requiring additional drive lines. Similar devices are avail-able as the A6811 (12 bits), A6812 (20 bits), and A6818 (32 bits). The A6810 output source drivers are npn Darlingtons, capable of sourcing to 40 mA. The controlled output slew rate reduces electromagnetic noise, which is an important consideration in systems that include telecommunications and/or microprocessors and to meet government emissions regulations. For inter-digit blanking, all output drivers can be disabled and all sink drivers turned on with a BLANKING input high. The pnp active pull-downs will sink at least 2.5 mA. The A6810 are available in two temperature ranges for optimum performance in commercial (suffix S-) or industrial (suffix E-) applications. They are provided in two package styles for through-hole DIP (suffix -A) or minimum-area surface-mount SOIC (suffix -LW). Copper lead frames, low logic-power dissipation, and low outputsaturation voltages allow all devices to source 25 mA from all outputs continuously over the maximum operating temperature range.

OUT 9 OUT 10 SERIAL DATA OUT LOAD SUPPLY SERIAL DATA IN BLANKING OUT 1 OUT 2 OUT 3

Logic Supply Voltage, VDD................... 7.0 V Driver Supply Voltage, VBB................... 60 V Continuous Output Current Range, IOUT......................... +15 mA Input Voltage Range, VIN....................... V to VDD 0.3 V Package Power Dissipation, PD........................................ See Graph Operating Temperature Range, TA (Suffix `E').................. to +85C (Suffix `S').................. to +85C Storage Temperature Range, TS............................... to +125C

FEATURES

s Controlled Output Slew Rate s High-Speed Data Storage 60 V Minimum s Improved Replacements Output Breakdown for UCN5810, s High Data Input Rate and UCQ5810 s PNP Active Pull-Downs s Low Output-Saturation Voltages s Low-Power CMOS Logic and Latches

Caution: These CMOS devices have input static protection (Class 2) but are still susceptible to damage if exposed to extremely high static electrical charges.

Complete part number includes a suffix to identify operating temperature range (E- or S-) and package type (-A or -LW). Always order by complete part number, e.g., A6810SLW.

OUT 8 OUT 7 OUT 6 CLOCK GROUND LOGIC SUPPLY STROBE OUT 5 OUT 4 NO CONNECTION
OUT 9 OUT 10 SERIAL DATA OUT LOAD SUPPLY SERIAL DATA IN BLANKING OUT 1 OUT 2 OUT 3 NO CONNECTION

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts (508) 853-5000 Copyright 1998, 2003 Allegro MicroSystems, Inc.

CLOCK SERIAL DATA IN STROBE V DD LOGIC SUPPLY SERIAL DATA OUT
Serial Shift Register Contents Data Clock Input RN X Serial Data Strobe Output Input P3... X
L = Low Logic Level H = High Logic Level X = Irrelevant

 

Related products with the same datasheet
A6810SLWP
A6810xA
A6810xLW
Some Part number from the same manufacture Allegro Micro Systems, Inc.
A6810EA DABic-IV,10-Bit Serial-input,latched Source Driver
A6810SLWP
A6811
A6812
A6812EA Dabic-iv 10-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6812KA Dabic-iv 20-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6812SA DABic-IV,20-Bit Serial-input,latched Source Driver
A6812SEP Dabic-iv 10-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6812xA
A6817
A6817SEP 8-Bit Addressable Dmos Power Driver
A6818
A6818EA Dabic-iv 20-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6818ELW
A6818SA Dabic-iv 20-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6818SLW
A6A259KA 28-Line Addressable Decoder/driver
A6A595KA 8-Bit Serial-input,dmos Power Driver
A6A595KLB
A6A595KLW
A6A6812ELW
Same catergory

24AA08/SN : 4k/8k 1.8v I2c Serial EePROMs. Single supply with operation down to 1.8V Low power CMOS technology 1 mA active current typical 10 A standby current typical 3 A standby current typical at 1.8V Organized or 4 blocks of 256 bytes 8) 2-wire serial interface bus, I2CTM compatible Schmitt trigger, filtered inputs for noise suppression Output slope control to eliminate ground bounce 100 kHz (1.8V).

54LVX3245J-QML : 8-bit Dual Supply Translating Transceiver With Tri-state Outputs. 54LVX3245 8-Bit Dual Supply Translating Transceiver with TRI-STATE Outputs 54LVX3245 8-Bit Dual Supply Translating Transceiver with TRI-STATE Outputs The is a dual-supply, 8-bit translating transceiver that is designed to interface between a 3V bus and a 5V bus in a mixed 3V/5V supply environment. The Transmit/Receive (T/R) input determines the direction.

A6812 : . LOAD SUPPLY SERIAL DATA OUT 20 OUT 19 OUT 18 OUT 17 OUT 16 OUT 15 OUT 14 OUT 13 OUT 12 OUT 11 BLANKING GROUND VBB VDD LOGIC SUPPLY SERIAL DATA IN OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8 OUT 9 OUT 10 STROBE CLOCK The A6812 devices combine a 20-bit CMOS shift register, accompanying data latches and control circuitry with bipolar sourcing outputs.

AN8730SB : 4-channel Driver ic For Optical Disk. The a 4-channel driver IC, which can operate in a low voltage, employing the low power consumption type H-bridge system with a switching regulator. It is especially suited for a portable CD/MD player. Low power consumption due to PWM control of power supply Wide output D-range independent of the reference voltage of the system Enable to set input/output.

DS36954 : DS36954 - Quad Differential Bus Transceiver, Package: Soic Wide, Pin Nb=20.

E8870IO : Intel E8870IO Server I/o Hub (SIOH).

HT82K96E : HT82K96E 8-Bit Usb Multimedia Keyboard Encoder OTP MCU. Operating voltage: 409615 program memory ROM 1608 data memory RAM HALT function and wake-up feature reduce power Low voltage reset function 32 bidirectional I/O lines (max.) 8-bit programmable timer/event counter with over- 8-level subroutine nesting to 0.33ms instruction cycle with 12MHz system Crystal oscillator or 12MHz) Watchdog Timer 6 channels.

KL5KUSB11 : . The Kawasaki USB to Serial enables your system to have the capability to communicate between the USB (Universal Serial Bus) port and serial port peripherals. This device meets the USB 1.0/1.1 and standard serial port s. All the advantages of USB are available to peripherals with serial port interface such as plug and play capabilities. With the USB Standard.

MAX9424EVKIT : MAX9424EVKIT Evaluation Kit For The MAX9424/MAX9425/MAX9426/MAX9427. The MAX9424 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed circuit (PC) board. The EV kit includes the MAX9424, a four-channel lowskew PECL/LVPECL-to-ECL/LVECL translator. The EV kit accepts differential PECL/LVPECL input signals and converts these differential ECL/LVECL signals at an operating frequency to 3GHz. The MAX9424.

PCI4410A : . IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold.

SN65LVDS179D : ti SN65LVDS179, Single Full-duplex LVDS Transceiver. Meets or Exceeds the Requirements of ANSI TIA/EIA-644-1995 Standard Signaling Rates to 400 Mbps Bus-Terminal ESD Exceeds 12 kV Operates From a Single 3.3-V Supply Low-Voltage Differential Signaling With Typical Output Voltages 350 mV and a 100- Load Propagation Delay Times Driver: 1.7 ns Typ Receiver: 3.7 ns Typ Power Dissipation at 200 MHz Driver:.

SN74ABTH16460DGG : 4-to-1 Multiplexed/demultiplexed Transceivers With 3-state Outputs. Members of the Texas Instruments WidebusTM Family State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce) V at VCC = 25C High-Impedance State During Power Up and Power Down Distributed VCC and GND Pin Configuration Minimizes High-Speed.

TSB21LV03 : Ieee 1394-1995 Triple-cable Transceiver/arbiter. Supports Provisions of IEEE 1394-1995 Standard for High Performance Serial Bus Fully Interoperable with FireWireTM Implementation of IEEE 1394-1995 Provides Three Fully Compliant Cable Ports at 100/200 Megabits per Second (Mbits/s) Cable Ports Monitor Line Conditions for Active Connection to Remote Node Device Power-Down Feature to Conserve Energy in Battery-Powered.

VCH162374ADGG : 16-bit Edge Triggered D-type Flip-flop With 30 Ohmseries Termination Resistors; 5 V Input/output Tolerant; 3-state.

SCAN25100 : The SCAN25100 is a 2457.6, 1228.8, and 614.4 Mbps serializer/deseralizer (SerDes) for high-speed bidirectional serial data transmission over FR-4 printed circuit board backplanes, balanced cables, and optical fiber. The SCAN25100 integrates precision delay calibration measurement (DCM) circuitry that measures link delay components to better than 800 ps accuracy.

ISP1562 : The ISP1562 is a Peripheral Component Interconnect (PCI)-based, single-chip Universal Serial Bus (USB) Host Controller. It integrates two Original USB Open Host Controller Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface (EHCI) core, and two transceivers that are compliant with Hi-Speed USB and Original USB. The functional.

 
0-C     D-L     M-R     S-Z