Details, datasheet, quote on part number: A6811ELW
PartA6811ELW
CategoryInterface and Interconnect
Description
CompanyAllegro Micro Systems, Inc.
DatasheetDownload A6811ELW datasheet
Quote
Find where to buy
 
  

 

Features, Applications
OUT 11 OUT 12 BLANKING SERIAL DATA OUT SERIAL DATA IN LOGIC SUPPLY CLOCK STROBE OUT 1 OUT

The A6811 devices combine a 12-bit CMOS shift register, accompanying data latches and control circuitry with bipolar sourcing outputs and pnp active pull downs. Designed primarily to drive vacuum-fluorescent displays, the 60 V and -40 mA output ratings also allow these devices to be used in many other peripheral power driver applications. The A6811 features an increased data input rate (compared with the older UCN/UCQ5811A) and a controlled output slew rate. The CMOS shift register and latches allow direct interfacing with microprocessor-based systems. With 5 V logic supply, typical serial-data input rates are to 33 MHz. A CMOS serial data output permits cascade connections in applications requiring additional drive lines. Similar devices are available as the A6809 and A6810 (10 bits), A6812 (20 bits), and A6818 (32 bits). The A6811 output source drivers are npn Darlingtons, capable of sourcing to 40 mA. The controlled output slew rate reduces electromagnetic noise, which is an important consideration in systems that include telecommunications and/or microprocessors and to meet government emissions regulations. For inter-digit blanking, all output drivers can be disabled and all sink drivers turned on with a BLANKING input high. The pnp active pull-downs will sink at least 2.5 mA. Two temperature ranges are available for optimum performance in commercial (suffix S-) or industrial (suffix E-) applications. Package styles are provided for through-hole DIP (suffix -A) and surface-mount SOIC or PLCC (suffix -LW or -EP). Copper lead frames, low logicpower dissipation, and low output-saturation voltages allow all devices to source 25 mA from all outputs continuously to 83C.

Logic Supply Voltage, VDD................... 7.0 V Driver Supply Voltage, VBB................... 60 V Continuous Output Current Range, IOUT......................... +15 mA Input Voltage Range, VIN....................... V to VDD 0.3 V Package Power Dissipation, PD........................................ See Graph Operating Temperature Range, TA (Suffix `E').................. to +85C (Suffix `S').................. to +85C Storage Temperature Range, TS............................... to +125C

FEATURES

s Controlled Output Slew Rate s High-Speed Data Storage 60 V Minimum Output Breakdown s High Data Input Rate s PNP Active Pull-Downs s Low Output-Saturation Voltages

Low-Power CMOS Logic and Latches Improved Replacements for SN75512B, UCN5811, and UCQ5811

Caution: These CMOS devices have input static protection (Class 2) but are still susceptible to damage if exposed to extremely high static electrical charges.

Complete part number includes a suffix to identify operating temperature range (E- or S-) and package type (-A, -EP, or -LW). Always order by complete part number, e.g., A6811SLW.

SERIAL DATA OUT SERIAL DATA IN LOGIC SUPPLY CLOCK STROBE

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts (508) 853-5000 Copyright 2000, Allegro MicroSystems, Inc.

CLOCK SERIAL DATA IN STROBE V DD LOGIC SUPPLY SERIAL DATA OUT
Serial Shift Register Contents Data Clock Input RN X Serial Data Strobe Output Input P3... X
L = Low Logic Level H = High Logic Level X = Irrelevant

 

Related products with the same datasheet
A6811EA
A6811EEP
A6811SA
A6811SEP
A6811SLW
A6811xA
A6811xEP
A6811xLW
Some Part number from the same manufacture Allegro Micro Systems, Inc.
A6811SA
A6812
A6812EA Dabic-iv 10-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6812KA Dabic-iv 20-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6812SA DABic-IV,20-Bit Serial-input,latched Source Driver
A6812SEP Dabic-iv 10-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6812xA
A6817
A6817SEP 8-Bit Addressable Dmos Power Driver
A6818
A6818EA Dabic-iv 20-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6818ELW
A6818SA Dabic-iv 20-Bit Serial-input Latched Source Drivers With Active Pull-downs
A6818SLW
A6A259KA 28-Line Addressable Decoder/driver
A6A595KA 8-Bit Serial-input,dmos Power Driver
A6A595KLB
A6A595KLW
A6A6812ELW
A6B259
A6B259KA 8-Bit Addressable Dmos Power Driver

A3056LU : Dual-output Hall-effect Switch

A3260X :

SLA5021 :

ACS760 : 12 V High-Side Hot-Swap Hall Effect Based Current Monitor The ACS760 combines Allegro Hall-effect current sense technology with a hot-swap controller resulting in a more efficient integrated controller for 12 V applications. By eliminating the need for a shunt resistor, the I2R losses in the powe

A1374EKB-T : High Precision, Output Pin Programmable Linear Hall Effect Sensors

3932_03 : Three-phase Power Mosfet Controller

ACS760ELF-20BTR-T : 12 V High-side Hot-swap Hall Effect Based Current Monitor

A1373LKBTI-T : High Precision, Output Pin Programmable Linear Hall Effect Sensors

A3251JUATL : Field-programmable, Chopper-stabilized Unipolar Hall-effect Switches

A8582KLPTR-T : Wide Input Voltage, 2.4 MHz, 2.0 A Asynchronous Buck Regulator The A8582 is an adjustable frequency, high output current, PWM regulator that integrates a low resistance, high-side, N-channel MOSFET. The A8582 incorporates current-mode control to provide simple compensation, excellent loop stability

A3907ECGTR : Pmic - Motor And Fan Controllers, Driver Integrated Circuit (ics) Cut Tape (CT) 102mA 2.3 V ~ 5.5 V; IC VOICE COIL MOTOR DVR 6-WLCSP Specifications: Applications: Voice Coil Motor Driver ; Number of Outputs: 1 ; Voltage - Supply: 2.3 V ~ 5.5 V ; Voltage - Load: - ; Current - Output: 102mA ; Operating Temperature: -40C ~ 85C ; Package / Case: 6-XFBGA, WLCSP ; Packaging: Cut Tape (CT) ; Lead Free Status: Lead Free ; RoHS Status:

LC5513D : POWER FACTOR CONTROLLER, 18 kHz SWITCHING FREQ-MAX, DIP7 Specifications: Configuration / Function: Boost ; Package Type: DIP, Other, ROHS COMPLIANT, DIP-8/7 ; Life Cycle Stage: ACTIVE ; VIN: 20 volts ; fsw: 18 kHz ; Operating Temperature: -55 to 125 C (-67 to 257 F)

 
0-C     D-L     M-R     S-Z