Details, datasheet, quote on part number: A6B273KLW
PartA6B273KLW
Category
Description8-Bit Latched Dmos Power Driver
CompanyAllegro Micro Systems, Inc.
DatasheetDownload A6B273KLW datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The A6B273KA and A6B273KLW combine eight (positive-edgetriggered D-type) data latches and DMOS outputs for systems requiring relatively high load power. Driver applications include relays, solenoids, and other medium-current or high-voltage peripheral power loads. The CMOS inputs and latches allow direct interfacing with microprocessor-based systems. Use with TTL may require appropriate pull-up resistors to ensure an input logic high. The DMOS output inverts the DATA input. All of the output drivers are disabled (the DMOS sink drivers turned OFF) with the CLEAR input low. The A6B273KA/KLW DMOS open-drain outputs are capable of sinking to 500 mA. Similar devices with reduced rDS(on) are available as the A6273KA/KLW. The A6B273KA is furnished a 20-pin dual in-line plastic package. The A6B273KLW is furnished a 20-lead wide-body, small-outline plastic package (SOIC) with gull-wing leads for surfacemount applications. Copper lead frames, reduced supply current requirements, and low on-state resistance allow both devices to sink 150 mA from all outputs continuously, to ambient temperatures over 85C.

Note that the A6B273KA (DIP) and the A6B273KLW (SOIC) are electrically identical and share a common terminal number assignment.

Output Voltage, VO............................... 50 V Output Drain Current, Continuous, IO.......................... 150 mA* Peak, IOM................................... 500 mA Single-Pulse Avalanche Energy, EAS................................................. 30 mJ Logic Supply Voltage, VDD.................. 7.0 V Input Voltage Range, VI................................... +7.0 V Package Power Dissipation, PD........................................... See Graph Operating Temperature Range, TA................................. to +125C Storage Temperature Range, TS................................. to +150C

* Each output, all outputs on. Pulse duration 100 s, duty cycle 2%. Caution: These CMOS devices have input static protection (Class 3) but are still susceptible to damage if exposed to extremely high static electrical charges.

FEATURES

50 V Minimum Output Clamp Voltage 150 mA Output Current (all outputs simultaneously) s 5 Typical rDS(on) s Low Power Consumption s Replacements for TPIC6B273N and TPIC6B273DW

Always order by complete part number: Part Number Package A6B273KA 20-pin DIP A6B273KLW 20-lead SOIC


L = Low Logic Level H = High Logic Level X = Irrelevant R = Previous State

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 853-5000 W Copyright 2000, Allegro MicroSystems, Inc.


 

Some Part number from the same manufacture Allegro Micro Systems, Inc.
A6B595
A6B595KA 8-Bit Serial-input Latched Dmos Power Drivers
A8178
A8178LLR Low-dropout,7.7V Preregulator
A8178LLT Bimos ii Unipolar Stepper-motor Translator/driver (four-channel)
A8181
A8181SLB DABiC-IV, 12-Bit Serial-Input, Latched Source Driver
A8182SL Low-Dropout, 5 V Regulator -- High-efficiency
A8183
A8183SLU Low-Dropout, 3 V Regulator -- High Efficiency
A8184
A8184SLT Low-Dropout, 3 V Regulator, High Efficiency
A8186
A8186SLU Low-Dropout, 3 V Regulator -- High Efficiency
A8187
A8187SLT Low-Dropout, 3.3 V Regulator -- High Efficiency
A8188
A8188SL Low-Dropout, 3.3 V Regulator -- High Efficiency
A8188SL-25
A8188SL-xx Low-Dropout, 3.3 V Regulator -- High Efficiency
A8188SLT-25
 
0-C     D-L     M-R     S-Z