|
Details, datasheet, quote on part number:AD668JQ
| |
| Part: | AD668JQ |
| Category: | Data Conversion => DAC (Digital to Analog Converters) => 10-14 bit |
| Description: | 12-Bit Ultrahigh Speed Multiplying D/A Converter |
| Company: | Analog Devices |
| Datasheet: | Download AD668JQ datasheet File size : 381 kB |
| Request For quote: | Find where to buy AD668JQ
|
| |
Datasheet text preview:
a
FEATURES Ultrahigh Speed: Current Settling to 1 LSB in 90 ns for a Full-Scale Change in Digital Input. Voltage Settling to 1 LSB in 120 ns for a Full-Scale Change in Analog Input 15 MHz Reference Bandwidth Monotonicity Guaranteed over Temperature 10.24 mA Current Output or 1.024 V Voltage Output Integral and Differential Linearity Guaranteed over Temperature 0.3" "Skinny DIP" Packaging MIL-STD-883 Compliant Versions Available
12-Bit Ultrahigh Speed Multiplying D/A Converter AD668
FUNCTIONAL BLOCK DIAGRAM
PRODUCT DESCRIPTION
The AD668 is an ultrahigh speed, 12-bit, multiplying digital-toanalog converter, providing outstanding accuracy and speed performance in responding to both analog and digital inputs. The AD668 provides a level of performance and functionality in a monolithic device that exceeds that of many contemporary hybrid devices. The part is fabricated using Analog Devices' Complementary Bipolar (CB) Process, which features vertical NPN and PNP devices on the same chip without the use of dielectric isolation. The AD668's design capitalizes on this proprietary process in combination with standard low impedance circuit techniques to provide its unique combination of speed and accuracy in a monolithic part. The wideband reference input is buffered by a high gain, closed loop reference amplifier. The reference input is essentially a 1 V, high impedance input, but trimmed resistive dividers are provided to readily accommodate 5 V and 1.25 V references. The reference amplifier features an effective small signal bandwidth of 15 MHz and an effective slew rate of 3% of full scale/ns. Multiple matched current sources and thin film ladder techniques are combined to produce bit weighting. The output range can nominally be taken as a 10.24 mA current output or a 1.024 V voltage output. Varying the analog input can provide modulation of the DAC full scale from 10% to 120% of its nominal value. Bipolar outputs can be realized through pin-strapping to provide two-quadrant operation without additional external circuitry. Laser wafer trimming insures full 12-bit linearity and excellent gain accuracy. All grades of the AD668 are guaranteed monotonic over their full operating temperature range. Furthermore, the output resistance of the DAC is trimmed to 100 ± 1.0%.
The AD668 is available in four performance grades. The AD668JQ and KQ are specified for operation from 0°C to +70°C, the AD668AQ is specified for operation from 40°C to +85°C, and the AD668SQ specified for operation from 55°C to +125°C. All grades are available in a 24-pin cerdip (0.3" package.
PRODUCT HIGHLIGHTS
1. The fast settling time of the AD668 provides suitable performance for waveform generation, graphics display, and high speed A/D conversion applications. 2. The high bandwidth reference channel allows high frequency modulation between analog and digital inputs. 3. The AD668's design is configured to allow wide variation of the analog input, from 10% to 120% of its nominal value. 4. The AD668's combination of high performance and tremendous flexibility makes it an ideal building block for a variety of high speed, high accuracy instrumentation applications. 5. The digital inputs are readily compatible with both TTL and 5 V CMOS logic families. 6. Skinny DIP (0.3") packaging minimizes board space requirements and eases layout considerations. 7. The AD668 is available in versions compliant with MILSTD-883. Refer to the Analog Devices Military Products Databook or current AD668/883B data sheet for detailed specifications.
REV. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 Fax: 617/326-8703
AD668SPECIFICATIONS (@ T = +25 C, V
A
CC
= +15 V, VEE = 15 V, unless otherwise noted)
AD668K Typ Max Min 12 * * * * AD668S Typ Max Units Bits µA µV
Parameter RESOLUTION LSB WEIGHT (At Nominal FSR) Current Voltage (Current into RL) ACCURACY1 Linearity TMIN to TMAX Differential Nonlinearity TMIN to TMAX Monotonicity Unipolar Offset (Digital) Bipolar Offset Bipolar Zero Analog Offset Gain Error TEMPERATURE COEFFICIENTS2 Unipolar Offset Bipolar Offset Bipolar Zero Analog Offset Gain Drift Gain Drift (IOUT) REFERENCE INPUT Input Resistance 5.0 V Range 1.25 V Range 1.0 V Range Reference Range (TMIN to TMAX) DATA INPUTS Logic Levels (TMIN to TMAX) V IH V LL Logic Currents (TMIN to TMAX) IIH II L VTH Pin Voltage CODING CURRENT OUTPUT RANGES VOLTAGE OUTPUT RANGES OUTPUT COMPLIANCE OUTPUT RESISTANCE Exclusive of RL Inclusive of RL REFERENCE AMPLIFIER Input Bias Current Slew Rate Large Signal Bandwidth Small Signal Bandwidth Undervoltage Recovery Time VREF/VNOM to 0%
Min 12
AD668J/A Typ Max
Min 12
2.5 250
1/2 +1/2 1/4 +1/4 * * LSB 3/4 +3/4 1/2 +1/2 * * LSB 1 +1 1/2 +1/2 * * LSB 1 +1 1/2 +1/2 * * LSB GUARANTEED OVER RATED SPECIFICATION TEMPERATURE RANGE 0.2 +0.2 * * * * % of FSR 1.0 +1.0 0.6 +0.6 * * % of FSR 0.5 +0.5 0.2 +0.2 * * % of FSR 1.0 +1.0 0.7 +0.7 * * % of VNOM/°C 1.0 +1.0 * * * * % of FSR 8 25 20 20 30 +8 +25 +20 +20 +30 5 15 15 10 15 +5 +15 +15 +10 +15 * * * 20 40 * * * +20 +40 ppm of FSR/°C ppm of FSR/°C ppm of FSR/°C ppm of VNOM/°C ppm of FSR/°C ppm of FSR/°C
± 150
± 150
± 150
10
5 5 1 100
120
*
* * * *
*
*
* * * *
*
k k M % of VNOM
2.0 0.0 10 0
7.0 0.8 +10 100
* * * *
* * * *
* * * 0
* * * 200
V V µA µA V
60 1.4
*
100
BINARY, OFFSET BINARY 0 to 10.24, ± 5.12 0 to 1.024, ± 0.512 2 160 99 200 100 1.5 3 10 15 35 +1.2 240 101 * * * * * * * * * * * * * * * * * * * * * * * * * * mA V V µA % of FS/ns MHz MHz ns
2
REV. A
AD668
Parameter AC CHARACTERISTICS Analog Settling Time (10% to 120% Step) to ± 1% to ± 0.1% to ± 0.025% Digital Settling Time Current to ± 1% to ± 0.025% Voltage (100 Internal RL)3 to 1% to 0.1% to 0.025% Glitch Impulse4 Peak Amplitude Total Harmonic Distortion5 Multiplying Feedthrough Error6 FULL-SCALE TRANSITION2 10% to 90% Rise Time 90% to 10% Fall Time POWER REQUIREMENTS +10.8 V to +16.5 V 10.8 V to 16.5 V Power Dissipation PSRR7 TEMPERATURE RANGE Rated Specification2 (J, K, S) Rated Specification (A) Storage 0 40 65 Min AD668J/A Typ Max AD668K Min Typ Max Min AD668S Typ Max Units
60 90 120
* * *
* * *
ns to 1% of FSR ns to 0.1% of FSR ns to 0.025% of FSR
30 90 50 75 110 350 20 75 62 11 11 27 7 510 32 9 615 0.05 +70 +85 +150 * *
5 6 7
* * * * * * * * * * * * * * * * * 55 *
* * * * * * * * * * * * * * * +125 *
ns to 1% of FSR ns to 0.025% of FSR ns to 1% of FSR ns to 0.1% of FSR ns to 0.025% of FSR pV-sec % of FSR dB dB ns ns mA mA mW % of FSR/V °C °C °C
NOTES *Same as AD668J/A. 1 Measured in IOUT mode. Specified at nominal 5 V full-scale reference. 2 Measured in VOUT mode, unless otherwise specified. Specified at nominal 5 V full-scale reference. 3 Total resistance. Refer to Figure 4. 4 At the major carry, driven by HCMOS logic.
V OUT = 1 V p-p, V IN = 10% to 110%, 100 kHz. Digital Input All 1s. V IN = 200 mV p-p, 1 MHz Sine Wave. Digital Input all 0s. See Figure 20. Measured at 15 V ± 10% and 12 V ± 10%. Specifications shown in boldface are tested on all producfion units at final electrical test. Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS*
VCC to REFCOM . . . . . . . . . . . . . . . . . . . . . . . . 0 V to +18 V VEE to REFCOM . . . . . . . . . . . . . . . . . . . . . . . . . .0 V to 18 V REFCOM to LCOM . . . . . . . . . . . . . . . . . . +100 mV to 10 V ACOM to LCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 100 mV THCOM to LCOM . . . . . . . . . . . . . . . . . . . . . . . . . . ± 500 mV REFCOM to REFIN (1, 2) . . . . . . . . . . . . . . . . . . . . . . . . 18 V IBPO to LCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .± 5 V IOUT to LCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V to VTH Digital Inputs to THCOM . . . . . . . . . . . . . 500 mV to +7.0 V REFIN1 to REFIN2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V VTH to THCOM . . . . . . . . . . . . . . . . . . . . . . 0.7 V to +1.4 V Logic Threshold Control Input Current . . . . . . . . . . . . . 5 mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670 mW Storage Temperature Range Q (Cerdip) Package . . . . . . . . . . . . . . . . . . 65°C to +150°C Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . +175°C Thermal Resistance JA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +75°C/W J C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . + 2 5° C / W
*Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
REV. A
3
AD668
ORDERING GUIDE
Model1 AD668JQ AD668KQ AD668AQ AD668SQ
Temperature Range 0°C to +70°C 0°C to +70°C 40°C to +85°C 55°C to +125°C
Linearity Error Max @ 25°C ± 1/2 ± 1/4 ± 1/2 ± 1/2
Voltage Gain T.C. Max ppm/°C ± 30 ± 15 ± 30 ± 40
Package Option2 Q-24 Q-24 Q-24 Q-24
NOTES 1 For details on grade and package offerings screened in accordance with MIL-STD-883, refer to the Analog Devices Military Products Databook or current AD668/883B data sheet. 2 Q = Cerdip.
PIN CONFIGURATION
DEFINITIONS
LINEARITY ERROR (also called INTEGRAL NONLINEARITY OR INL): Analog Devices defines linearity error as the maximum deviation of the actual analog output from the ideal output (a straight line drawn from 0 to FS) for any bit combination expressed in multiples of 1 LSB. The AD668 is laser trimmed to 1/4 LSB (0.006% of FS) maximum linearity error at +25°C for the K version and 1/2 LSB for the J and S versions. DIFFERENTIAL LINEARITY ERROR (also called DIFFERENTIAL NONLINEARITY or DNL): DNL is the measure of the variation in the analog output, normalized to fun scale, associated with a 1 LSB change in digital input code. MONOTONICITY: A DAC is said to be monotonic if the output either increases or remains constant as the digital input increases. Monotonic behavior requires that the differential linearity error not exceed 1 LSB in the negative direction. UNIPOLAR OFFSET ERROR (DAC OFFSET): The DAC offset is the portion of the DAC output that is independent of the digital input. The unipolar DAC offset error is measured as the deviation of the analog output from the ideal (0 V or 0 mA) when the analog input is set to 100% and the digital inputs are set to all 0s.
BIPOLAR OFFSET ERROR: The deviation of the analog output from the ideal (negative half-scale) when the DAC is connected in the bipolar mode (Pin 16 connected to Pin 20), the analog input is set to 100%, and the digital inputs are set to all 0s is called the bipolar offset error. BIPOLAR ZERO ERROR: The deviation of the analog output from the ideal (0 V or 0 mA) for bipolar mode when only the MSB is on (100 . . . 00) is called bipolar zero error. COMPLIANCE VOLTAGE: The allowable voltage excursion at the output node of a DAC which will not degrade the accuracy of the DAC output. SETTLING TIME (DIGITAL CHANNEL): The time required for the output to reach and remain within a specified error band about its final value, measured from the digital input transition. SETTLING TIME (ANALOG CHANNEL): The time required for the output to reach and remain within a specified error band about its final value, measured from the analog input's crossing of it's 50% value. GAIN ERROR: The difference between the ideal and actual output span of FS 1 LSB, expressed either in % of FS or LSB, when all bits are on is called the gain error.
4
REV. A
AD668
ANALOG OFFSET ERROR: The analog offset is defined as the offset of the analog amplifier channel, referred to the analog input. Ideally, this would be measured with the analog input at 0 V and the digital input at full scale. Since a 0 V analog input voltage constitutes an undervoltage condition, this specification is determined through linear extrapolation, as indicated in Figure 1. In current output mode: Unipolar Mode
IOUT = V IN DAC code × × 10. 24 mA V NOM 4096
Bipolar Mode
IOUT = V IN V IN DAC code × × 10. 24 mA × 5.12 mA V NOM V NOM 4096
In voltage output mode:
V OUT = IOUT × RLOAD
(for both unipolar and bipolar modes) where: VIN the analog input voltage. VNOM the nominal full scale of the reference voltage: 1 V, 1.25 V, or 5 V, determined by the wiring configuration of Pins 21 and 22. (See APPLYING THE AD668.)
Figure 1. Derivation of Analog Offset Voltage
DAC code the numerical representation of the DAC's digital inputs; a number between 0 and 4095. RLOAD the resistance of the DAC output node; the maximum this can be is 200 (the internal DAC ladder resistance). The on-board load resistor (Pin 19) has been trimmed so that its parallel combination with the DAC ladder resistance is 100 (± 1%) Bipolar mode produces a bipolar analog output from the digital input by offsetting the normal output current with a precision current source. This offset is achieved by connecting Pin 16 to the DAC output. In the unipolar mode, Pin 16 should be grounded. If the dc errors are included, the transfer function becomes somewhat more complex: VIN VNOM ×
GLITCH IMPULSE: Asymmetrical switching times in a DAC may give rise to undesired output transients which are quantified by their glitch impulse. It is specified as the net area of the glitch in pV-sec.
IOUT =
+ OFFSET ANALOG
DAC code 4096
× (1 + E ) × 10.24 mA
+ OFFSET DIGITAL ×
V IN V NOM
× 10.24 mA
Figure 2. AD668 Major Carry Glitch
FUNCTIONAL DESCRIPTION
The AD668 is designed to combine excellent performance with maximum flexibility. The functional block diagram and the simple transfer functions provided below will provide the user with a basic grasp of the AD668's operation. Examples of typical circuit configurations are provided in the section APPLYING THE AD668. Subsequent sections contain more detailed information useful in optimizing DAC performance in high speed, high resolution applications.
DAC Transfer Function
V IN V NOM
+ OFFSET ANALOG
× ( 5.12 mA + [OFFSET BIPOLAR
× 10.24 mA ])
(Last term is for use in bipolar mode; VOUT is still just IOUT × RLOAD) where: OFFSETANALOG = the analog offset error. OFFSETDIGITAL = is the unipolar digital offset error. OFFSETBIPOLAR = is the bipolar offset error. E = the gain error, expressed fractionally.
Operating Limits:
The AD668 may be used either in a current output mode (DAC output connected to a virtual ground) or a voltage output mode (DAC output connected to a resistive load).
REV. A
5
|
|
