Details, datasheet, quote on part number: AD7548
PartAD7548
CategoryData Conversion => DAC (Digital to Analog Converters) => 10-14 bit
Description12-Bit, Multiplying, Iout, 8-Bit Bus
CompanyAnalog Devices
DatasheetDownload AD7548 datasheet
Cross ref.Similar parts: DAC811
Quote
Find where to buy
 
  
Related products with the same datasheet
AD7548A
AD7548B
AD7548J
AD7548K
AD7548S
AD7548T
Some Part number from the same manufacture Analog Devices
AD7548A 12-Bit, Multiplying, Iout, 8-Bit Bus
AD7548AQ Lc2mos 8-bit up Compatible 12-bit DAC
AD7548B 12-Bit, Multiplying, Iout, 8-Bit Bus
AD7548BQ Lc2mos 8-bit up Compatible 12-bit DAC
AD7548J 12-Bit, Multiplying, Iout, 8-Bit Bus
AD7548JP Lc2mos 8-bit up Compatible 12-bit DAC
AD7548K 12-Bit, Multiplying, Iout, 8-Bit Bus
AD7548KN Lc2mos 8-bit up Compatible 12-bit DAC
AD7548S 12-Bit, Multiplying, Iout, 8-Bit Bus
AD7548SE Lc2mos 8-bit up Compatible 12-bit DAC
AD7548T 12-Bit, Multiplying, Iout, 8-Bit Bus
AD7548TE Lc2mos 8-bit up Compatible 12-bit DAC
AD7549 12-Bit, Dual, Multiplying, Iout
AD7549AQ Lc2mos Dual 12-bit Up-compatible DAC
AD7549B 12-Bit, Dual, Multiplying, Iout
AD7549BQ Lc2mos Dual 12-bit Up-compatible DAC
AD7549J 12-Bit, Dual, Multiplying, Iout
AD7549JP Lc2mos Dual 12-bit Up-compatible DAC
AD7549K 12-Bit, Dual, Multiplying, Iout
AD7549KN Lc2mos Dual 12-bit Up-compatible DAC
AD7549S 12-Bit, Dual, Multiplying, Iout
Same catergory

AD1170 : High Resolution, Programmable Integrating A/D Converter.

ADC08100 : ADC08100 - 8-Bit, 20MSPS to 100MSPS, 1.3mW/MSPS A/D Converter, Package: Tssop, Pin Nb=24.

ADS5122CGHK : ti ADS5122, Low Power, 8 Channel, 10-bit, 65MSPS ADC, 1.8V. q 8 DIFFERENTIAL ANALOG INPUTS q 1VPP DIFFERENTIAL INPUT RANGE q INT/EXT VOLTAGE REFERENCE q ANALOG/DIGITAL SUPPLY: 1.8V q DIGITAL I/O SUPPLY: 1.8V/3.3V q DIFFERENTIAL NONLINEARITY: ±0.4LSB q INTEGRAL NONLINEARITY: ±1.0LSB q SIGNAL-TO-NOISE: 59dB at fIN 20MHz q POWER DISSIPATION: 733mW q INDIVIDUAL CHANNEL POWER-DOWN 257-LEAD, 0.8 BALL PITCH, PLASTIC.

ADS902 : . HIGH SNR: 57dB EXTERNAL REFERENCE LOW POWER: 140mW ADJUSTABLE FULL SCALE RANGE POWER DOWN SSOP-28 PACKAGE The is a high speed pipelined Analog-to-Digital Converter (ADC) that is specified to operate from a single +5V supply. This converter includes a wide bandwidth track/hold and a 10-bit quantizer. The performance is specified with a single-ended input.

DAC701KH : ti DAC701, 16-Bit Digital-to-analog Converter. q VOUT AND IOUT MODELS q HIGH ACCURACY: Linearity Error ±0.0015% of FSR max Differential Linearity Error ±0.003% of FSR max q MONOTONIC (at 15 bits) OVER FULL TEMPERATURE RANGE q PIN-COMPATIBLE WITH DAC72 q DUAL-IN-LINE PLASTIC AND HERMETIC CERAMIC AND SOIC Digital inputs are complementary binary coded and are TTL-, LSTTL-, 54/74C- and 54/74HC-compatible.

DAC811 : . For most current data sheet and other product information, visit www.burr-brown.com q SINGLE INTEGRATED CIRCUIT CHIP q MICROCOMPUTER INTERFACE: Double-Buffered Latch q VOLTAGE OUTPUT: +10V q MONOTONICITY GUARANTEED OVER TEMPERATURE q ±1/2LSB MAXIMUM NONLINEARITY OVER TEMPERATURE q GUARANTEED S AT ±12V AND ±15V SUPPLIES q TTL/5V CMOS-COMPATIBLE LOGIC.

ICL7135 : Display Output ADC. Dual Slope A/D With Display Multiplexers: Dual. Zero Reading for 0-V Input Precision Null Detection With True Polarity at Zero 1-pA Typical Input Current True Differential Input Multiplexed Binary-Coded-Decimal (BCD) Output Low Rollover Error: ± 1 Count Max Control Signals Allow Interfacing With UARTs or Microprocessors Autoranging Capability With Over- and Under-Range Signals TTL-Compatible Outputs.

MAX520 : Quad/Octal, 2-Wire Serial 8-Bit DACs With Rail-to-rail Outputs. Quad/Octal, 2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs The MAX520/MAX521 are quad/octal, 8-bit voltage-output digital-to-analog converters (DACs) with simple 2-wire serial interfaces that allow communication between multiple devices. They operate from a single +5V supply and their reference input range includes both supply rails. The MAX521.

MAX5886 : High-Speed Data Converters. MAX5886 3.3V, 12-Bit, 500Msps High Dynamic Performance DAC With Differential LVDS Inputs.

MX7534 : Microprocessor-Compatible, 14-Bit DACs. The MX7534/MX7535 are high-performance, CMOS, monolithic, 14-bit digital-to-analog converters (DACs). Wafer-level, laser-trimmed, thin-film resistors and temperature-compensated NMOS switches assure operation over the full operating temperature range with exceptional linear and gain stability. The MX7534 accepts right-justified data in two bytes from.

PCM1802DB : Audio A to D Converters. ti PCM1802, Single Ended Analog Input 24-BIT 96KHz Stereo ADC.

TLC7628CDW : ti TLC7628, 8-Bit, 0.1 us Dual Mdac, Parallel Input, Fast Control Signalling For DSP.

WM2608 : Industrial. WM2608 : Octal 10-BIT, Serial Input, Voltage Output DAC With Power Down.

WM8782 : The WM8782 is a high performance, low cost stereo audio ADC designed for recordable media applications..

LTC2308 : Low Noise, 500ksps, 8-Channel, 12-Bit ADC The LTC2308 is a low noise, 500ksps, 8-channel, 12-bit ADC with an SPI/MICROWIRE compatible serial interface. This ADC includes an internal reference and a fully differential sample-and-hold circuit to reduce common-mode noise. The internal conversion clock allows the external serial output data clock (SCK).

ISLA212P50 : 12-Bit, 500MSPS ADC The ISLA212P50 is a 12-bit, 500MSPS analog-to-digital converter designed with Intersil’s proprietary FemtoCharge™ technology on a standard CMOS process. The ISLA212P50 is part of a pin-compatible portfolio of 12 to 16-bit A/Ds with maximum sample rates ranging from 130MSPS to 500MSPS. The device utilizes two time-interleaved 250MSPS.

 
0-C     D-L     M-R     S-Z