Details, datasheet, quote on part number: AD9012TQ
CategoryData Conversion => ADC (Analog to Digital Converters) => <10 bit
DescriptionHigh Speed 8-Bit TTL A/D Converter
CompanyAnalog Devices
DatasheetDownload AD9012TQ datasheet
Find where to buy


Features, Applications

FEATURES 100 MSPS Encode Rate Very Low Input Capacitance--16 pF Low Power--1 W TTL Compatible Outputs MIL-STD-883 Compliant Versions Available APPLICATIONS Radar Guidance Digital Oscilloscopes/ATE Equipment Laser/Radar Warning Receivers Digital Radio Electronic Warfare (ECM, ECCM, ESM) Communication/Signal Intelligence

The an 8-bit, ultrahigh speed, analog-to-digital converter. The AD9012 is fabricated in an advanced bipolar process that allows operation at sampling rates up to one hundred megasamples/second. Functionally, the AD9012 is comprised of 256 parallel comparator stages whose outputs are decoded to drive the TTL compatible output latches. The exceptionally wide large-signal analog input bandwidth of 160 MHz is due to an innovative comparator design and very close attention to device layout considerations. The wide input bandwidth of the AD9012 allows very accurate acquisition of high speed pulse inputs without an external track-and-hold. The comparator output decoding scheme minimizes false codes, which is critical to high speed linearity. The AD9012 is available in two grades: one with 0.5 LSB linearity and one with 0.75 LSB linearity. Both versions are

offered in an industrial grade, to +85C, packaged a 28-lead DIP and a 28-lead JLCC. The military temperature range devices, to +125C, are available in ceramic DIP and LCC packages and are compliant to MIL-STD-883 Class B. The AD9012 is available in versions compliant with MIL-STD883. Refer to the Analog Devices Military Products Databook or current AD9012/883B data sheet for detailed specifications.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 Fax: 781/326-8703 Analog Devices, Inc., 2001

Parameter RESOLUTION DC ACCURACY Differential Linearity Integral Linearity No Missing Codes INITIAL OFFSET ERROR Top of Reference Ladder Bottom of Reference Ladder Offset Drift Coefficient ANALOG INPUT Input Bias Current1 Input Resistance Input Capacitance Large Signal Bandwidth2 Analog Input Slew Rate3 REFERENCE INPUT Reference Ladder Resistance Ladder Temperature Coefficient Reference Input Bandwidth DYNAMIC PERFORMANCE Conversion Rate Aperture Delay Aperture Uncertainty (Jitter) Output Delay (tPD)4, 5 Transient Response6 Overvoltage Recovery Time7 Output Rise Time4 Output Fall Time4 Output Time Skew4, 8 ENCODE INPUT Logic "1" Voltage4 Logic "0" Voltage4 Logic "1" Current Logic "0" Current Input Capacitance Encode Pulsewidth (Low)9 Encode Pulsewidth (High)9 OVERFLOW INHIBIT INPUT 0 V Input Current AC LINEARITY10 Effective Bits11 In-Band Harmonics to 1.23 MHz to 9.3 MHz to 19.3 MHz Signal-to-Noise Ratio12 Noise Power Ratio13 DIGITAL OUTPUT Logic "1" Voltage Logic "0" Voltage 25C Full 25C Full 25C Full 25C Full 25C Full 25C Full 25C Full 25C Full VI I III 48 46 Temp GUARANTEED

(+VS +5.0 V; VS 5.2 V; Differential Reference Voltage 2.0 V; unless otherwise noted.)

POWER SUPPLY14 Positive Supply Current V) 25C Full Supply Current V) 25C Full Nominal Power Dissipation 25C Reference Ladder Dissipation 25C 15 Power Supply Rejection Ratio 25C

NOTES 1 Measured with Analog Input V. 2 Measured by FFT analysis where fundamental is 3 dBc. 3 Input slew rate derived from rise time 90%) of full-scale step input. 4 Outputs terminated with two equivalent 'LS00 type loads. (See load circuit.) 5 Measured from ENCODE into data out for LSB only. 6 For full-scale step input, 8-bit accuracy is attained in specified time. 7 Recovers to 8-bit accuracy in specified time, after 150% full-scale input overvoltage. 8 Output time skew includes high-to-low and low-to-high transitions as well a s bit-to-bit time skew differences.

ENCODE signal rise/fall times should be less than 30 ns for normal operation. Measured at 75 MSPS encode rate. Harmonic data based on worst case harmonics. 11 Analog input frequency = 1.23 MHz. 12 RMS signal to rms noise, including harmonics with 1.23 MHz. analog input signal. 13 NPR measured @ 0.5 MHz. Noise Source 250 mW (rms) from 0.5 MHz to 8 MHz. 14 Supplies should remain stable within 5% for normal operation. 15 Measured 5% and 5%. Specifications subject to change without notice.

Positive Supply Voltage (+VS). 6 V Analog to Digital Supply Voltage Differential (VS). 0.5 V Negative Supply Voltage (VS). 6 V Analog Input Voltage. VS +0.5 V ENCODE Input Voltage. +5 V OVERFLOW INH Input Voltage. 0 V Reference Input Voltage (+VREF +0.1 V Differential Reference Voltage. 2.1 V Reference Midpoint Current. 4 mA Digital Output Current. 30 mA Operating Temperature Range to +125C Storage Temperature Range. to +150C Junction Temperature3. 150C Lead Soldering Temperature (10 sec). 300C

NOTES 1 Absolute maximum ratings are limiting values, to be applied individually, and beyond which the serviceability of the circuit may be impaired. Functional operability under any of these conditions is not necessarily implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 +VREF VREF under all circumstances. 3 Maximum junction temperature (t J max) should not exceed 150 C for ceramic and plastic packages: = PD (JA) tA PD (JC) + tc where PD = power dissipation JA = thermal impedance from junction to ambient ( C/W) JC = thermal impedance from junction to case ( C/W) tA = ambient temperature ( C) tC = case temperature ( C) typical thermal impedances are: Ceramic DIP = 42 C/W; = 10C/W Ceramic LCC = 15C/W JLCC = 15C/W.

100% production tested at 25C, and sample tested at specified temperatures. AC testing done on sample basis. III Sample tested only. IV Parameter is guaranteed by design and characterization testing. V Parameter is a typical value only. VI All devices are 100% production tested 25C. 100% production tested at temperature extremes for extended temperature devices; guaranteed by design and characterization testing for industrial devices.

*E = Leadless Ceramic Chip Carrier; J = Ceramic Leaded Chip Carrier; Q = Cerdip.

CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD9012 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.


Related products with the same datasheet
Some Part number from the same manufacture Analog Devices
AD9020 10-Bit 60 MSPS A/D Converter
AD9020PCB 10-bit 60 MSPS A/D Converter
AD9020S/883 10-Bit 60 MSPS A/D Converter
AD9020SE/883 10-bit 60 MSPS A/D Converter
AD9020T/883 10-Bit 60 MSPS A/D Converter
AD9020TE/883 10-bit 60 MSPS A/D Converter
AD9022 ADC, Ttl-compatible Logic: 12-bit
AD9032 12-bit 25 MSPS A/D Converter
AD9040 Complete 10-Bit Monolithic Sampling A/D Converter (ADC) With On-board Track-and-hold And Reference
AD9040APCB 10-bit 40 MSPS A/D Converter
AD9042 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042D 12-bit, 41 MSPS Monolithic A/D Converter
AD9042D/PCB 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042DPCB 12-bit, 41 MSPS Monolithic A/D Converter
AD9042ST/PCB 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042STPCB 12-bit, 41 MSPS Monolithic A/D Converter
AD9048 Monolithic 8-Bit Video A/D Converter
AD9048SE Monolithic 8-bit Video A/D Converter
AD9048SE2 Monolithic 8-Bit Video A/D Converter

ADG413B : 25 Ohm, Quad SPST (4NC) Switches (DG411 Replacement)

ADR01CRZ-REEL : Ultracompact, Precision 10.0 V Voltage References The ADR01, ADR02, ADR03, and ADR06 are precision 10.0 V, 5.0 V, 2.5 V, and 3.0 V band gap voltage references featuring high accuracy, high stability, and low power. The parts are housed in tiny, 5-lead SC70 and TSOT packages, as well as in 8-lead SO

AME8501AEFVCE40 : Uprocessor Supervisory

AME8833AEEV285Z : High Psrr, 150ma CMOS LDO

AD7888ARUZ-REEL7 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 8 Single-Ended, Unipolar Tape & Reel (TR) Single Supply; IC ADC 12BIT 8CHAN SRL 16TSSOP Specifications: Number of Bits: 12 ; Package / Case: 16-TSSOP (0.173", 4.40mm Width) ; Data Interface: DSP, MICROWIRE, QSPI, Serial, SPI ; Packaging: Tape & Reel (TR) ; Sampling Rate (Per Second): 125k ; Operating Temperature: -40C ~ 105C ; Voltage Supply Source: Single Supply ; Number of I

ADBF533WYBCZ4XX : 16-BIT, 40 MHz, OTHER DSP, PBGA160 Specifications: Data Bus: 40 ; Supply Voltage: 1.25 ; Package Type: Other, ROHS COMPLIANT, MO-205AE, CSBGA-160 ; Pin Count: 160 ; Clock Speed: 40 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; External Memory Interface: 16-Bit


ADM6322C38ARJZ-R7 : 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADSP-21060CW-160 : 24-BIT, 25 MHz, OTHER DSP, PQCC68 Specifications: Data Bus: 16-Bit ; Supply Voltage: 5V ; Package Type: Other, PLASTIC, LCC-68 ; Pin Count: 68 ; Clock Speed: 25 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; External Memory Interface: 24

0-C     D-L     M-R     S-Z