Details, datasheet, quote on part number: AD9020E/883
CategoryData Conversion => ADC (Analog to Digital Converters)
Description10-Bit 60 MSPS A/D Converter
CompanyAnalog Devices
DatasheetDownload AD9020E/883 datasheet


Features, Applications

FEATURES Monolithic 10-Bit/60 MSPS Converter TTL Outputs Bipolar 1.75 V) Analog Input 56 dB SNR @ 2.3 MHz Input Low (45 pF) Input Capacitance MIL-STD-883 Compliant Versions Available APPLICATIONS Digital Oscilloscopes Medical Imaging Professional Video Radar Warning/Guidance Systems Infrared Systems


The AD9020 A/D converter a 10-bit monolithic converter capable of word rates of 60 MSPS and above. Innovative architecture using 512 input comparators instead of the traditional 1024 required by other flash converters reduces input capacitance and improves linearity. Encode and outputs are TTL-compatible, making the AD9020 an ideal candidate for use in low power systems. An overflow bit is provided to indicate analog input signals greater than +VSENSE. Voltage sense lines are provided to insure accurate driving of the VREF voltages applied to the units. Quarter-point taps on the resistor ladder help optimize the integral linearity of the unit. Either 68-pin ceramic leaded (gull wing) packages or ceramic LCCs are available and are specifically designed for low thermal impedances. Two performance grades for temperatures of both to +70C and to +125C ranges are offered to allow the user to select the linearity best suited for each application. Dynamic performance is fully characterized and production tested +25C. MIL-STD-883 units are available. The AD9020 A/D Converter is available in versions compliant with MIL-STD-883. Refer to the Analog Devices Military Products Databook or current AD9020/883B data sheet for detailed specifications.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.Tel: 617/329-4700 World Wide Web Site: Fax: 617/326-8703 Analog Devices, Inc., 1997

+VS. +6 V VS. 6 V ANALOG IN. +2 V +VREF, VREF, +2 V +VREF to VREF. 4.0 V DIGITAL V to +VS

1/2REF, 1/4REF Current. 10 mA Digital Output Current. 20 mA Operating Temperature to +70C Storage Temperature. to +150C Maximum Junction Temperature2. +175C Lead Soldering Temp (10 sec). +300C

Parameter (Conditions) RESOLUTION DC ACCURACY Differential Nonlinearity Integral Nonlinearity No Missing Codes ANALOG INPUT Input Bias Current4 Input Resistance Input Capacitance4 Analog Bandwidth REFERENCE INPUT Reference Ladder Resistance Ladder Tempco Reference Ladder Offset Top of Ladder Bottom of Ladder Offset Drift Coefficient SWITCHING PERFORMANCE Conversion Rate Aperture Delay (tA) Aperture Uncertainty (Jitter) Output Delay (tOD)5 Output Time Skew5 DYNAMIC PERFORMANCE Transient Response Overvoltage Recovery Time Effective Number of Bits (ENOB) fIN = 2.3 MHz fIN = 10.3 MHz fIN = 15.3 MHz Signal-to-Noise Ratio6 fIN = 2.3 MHz fIN = 10.3 MHz fIN = 15.3 MHz Signal-to-Noise Ratio6 (Without Harmonics) fIN = 2.3 MHz fIN = 10.3 MHz fIN = 15.3 MHz

+25C Full +25C Full +25C Full +25C Full +25C Full +25C Full +25C

Parameter (Conditions) Temp Test Level Min AD9020JE/JZ Typ Max AD9020KE/KZ Min Typ Max Units DYNAMIC PERFORMANCE (continued) Harmonic Distortion +25C fIN = 2.3 MHz +25C fIN = 10.3 MHz +25C fIN = 15.3 MHz Two-Tone Intermodulation +25C Distortion Rejection7 Differential Phase +25C Differential Gain +25C ENCODE INPUT Logic "1" Voltage Logic "0" Voltage Logic "1" Current Logic "0" Current Input Capacitance Pulse Width (High) Pulse Width (Low) DIGITAL OUTPUTS Logic "1" Voltage (IOH = 2 mA) Logic "0" Voltage (IOL = 6 mA) POWER SUPPLY +VS Supply Current VS Supply Current Power Dissipation Power Supply Rejection Ratio (PSRR)8 Full +25C Full +25C Full +25C Full +25C Full

NOTES 1 Absolute maximum ratings are limiting values to be applied individually, and beyond which the service ability of the circuit may be impaired. Functional operability is not necessarily implied. Exposure to absolute maximum rating conditions for an extended period of time may affect device reliability. 2 Typical thermal impedances (part soldered onto board): 68-pin leaded ceramic chip carrier: = 17C/W (no air flow); = 15C/W (air flow = 500 LFM). 68-pin ceramic LCC: = 15C/W (no air flow); = 13C/W (air flow = 500 LFM). 3/4REF, 1/2REF, and 1/4REF reference ladder taps are driven from dc sources 0 V, and 0.875 V, respectively. Accuracy of the overflow comparator is not tested and not included in linearity specifications. 4 Measured with ANALOG = +V SENSE. 5 Output delay measured as worst-case time from 50% point of the rising edge of ENCODE to 50% point of the slowest rising or falling edge D 0D9. Output skew measured as worst-case difference in output delay among 0D9. 6 RMS signal to rms noise with analog input signal 1 dB below full scale at specified frequency. 7 Intermodulation measured with analog input frequencies of 2.3 MHz and 3.0 MHz 7 dB below full scale. 8 Measured as the ratio of the worst-case change in transition voltage of a single comparator for a 5% change S or VS. Specifications subject to change without notice.


Related products with the same datasheet
Some Part number from the same manufacture Analog Devices
AD9020J 10-Bit 60 MSPS A/D Converter
AD9020PCB 10-bit 60 MSPS A/D Converter
AD9020S/883 10-Bit 60 MSPS A/D Converter
AD9020SE/883 10-bit 60 MSPS A/D Converter
AD9020T/883 10-Bit 60 MSPS A/D Converter
AD9020TE/883 10-bit 60 MSPS A/D Converter
AD9022 ADC, Ttl-compatible Logic: 12-bit
AD9032 12-bit 25 MSPS A/D Converter
AD9040 Complete 10-Bit Monolithic Sampling A/D Converter (ADC) With On-board Track-and-hold And Reference
AD9040APCB 10-bit 40 MSPS A/D Converter
AD9042 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042D 12-bit, 41 MSPS Monolithic A/D Converter
AD9042D/PCB 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042DPCB 12-bit, 41 MSPS Monolithic A/D Converter
AD9042ST/PCB 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042STPCB 12-bit, 41 MSPS Monolithic A/D Converter
AD9048 Monolithic 8-Bit Video A/D Converter
AD9048SE Monolithic 8-bit Video A/D Converter
AD9048SE2 Monolithic 8-Bit Video A/D Converter
AD9048SQ Monolithic 8-bit Video A/D Converter

AD5611BKS-500RL7 : 2.7 V to 5.5 V,

AME8501AEFTAE24 : 3-Pin/5-Pin Micropower P Reset Family

AME8501BEFTCF44 : 3-Pin/5-Pin Micropower P Reset Family

ADP125 : 5.5V Input, 500 mA, Low Quiescent Current, CMOS Linear Regulator w/External Voltage Divider The ADP124/ADP125 are low quiescent current, low dropout linear regulators. They are designed to operate from an input voltage between 2.3 V and 5.5 V and to provide up to 500 mA of output current. The low 130 mV dropout voltage at a 500 mA load improves efficiency and allows operation over a wide i

ADE8157 : Narrow-Band Power Line Communications Slave Modem IC The ADE8157 is a complete digital baseband processor IC that includes a physical layer (PHY), data link layer (DLL), and networking layer (NL). The ADE8157 includes a high performance receive path analog-to-digital converter (ADC) to reduce the e

ADP2503ACPZ-R7 : 600 MA/1000 MA, 2.5 MHz Buck-Boost DC-to-DC Converter The ADP2503/ADP2504 are high efficiency, low quiescent current step-up/step-down dc-to-dc converters that can operate at input voltages above, below, or equal to the regulated output voltage. The power switches and synchronous rectifiers are int


ADM6320DW39ARJ-RL7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, ROHS COMPLIANT, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADP7158ACPZ-2.5-R7 : IC REG 2.5V 2A 10LFCSP Specifications: Family: PMIC - Voltage Regulators - Linear ; Manufacturer: Analog-Devices-Inc. ; Series: - ; Packaging: Cut Tape (CT)  ; Regulator Topology: Positive Fixed ; Voltage - Output: 2.5V ; Current - Output: 2A ; Voltage - Dropout (Typical): - ; Number of Regulators: 1 ; Voltage - Inpu

0-C     D-L     M-R     S-Z