Details, datasheet, quote on part number: AD9022SQ
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit
DescriptionADC, Ttl-compatible Logic: 12-bit
CompanyAnalog Devices
DatasheetDownload AD9022SQ datasheet
Find where to buy


Features, Applications

FEATURES Monolithic 12-Bit 20 MSPS A/D Converter Low Power Dissipation: 1.4 Watts On-Chip T/H and Reference High Spurious-Free Dynamic Range TTL Logic APPLICATIONS Radar Receivers Digital Communications Digital Instrumentation Electro-Optics

The is a high speed, high performance, monolithic 12-bit analog-to-digital converter. All necessary functions, including track-and-hold (T/H) and reference, are included on-chip to provide a complete conversion solution. is a companion unit to the AD9023; the primary difference between the two is that all logic for the AD9022 is TTL-compatible, while the AD9023 utilizes ECL logic for digital inputs and outputs. Pinouts for the two parts are nearly identical. Operating from +5 V and 5.2 V supplies, the AD9022 provides excellent dynamic performance. Sampling at 20 MSPS with AIN = 1 MHz, the spurious-free dynamic range (SFDR) is typically 76 dB; with AIN = 9.6 MHz, SFDR is 74 dB. SNR is typically 65 dB. The onboard T/H has a 110 MHz bandwidth and, more importantly, is designed to provide excellent dynamic performance for analog input frequencies above Nyquist. This feature is necessary in many undersampling signal processing applications, such as in direct IF-to-digital conversion. To maintain dynamic performance at higher IFs, monolithic RF track-and-holds (such as the AD9100 and AD9101 SamplifierTM) can be used with the AD9022 to process signals up to and beyond 70 MHz.

With DNL typically less than 0.5 LSB and 20 ns transient response settling time, the AD9022 provides excellent results when low-frequency analog inputs must be oversampled (such as CCD digitization). The full scale analog input 1 V with a 300 input impedance. The analog input can be driven directly from the signal source, or can be buffered by the AD96xx series of low noise, low distortion buffer amplifiers. All timing is internal to the AD9022; the clock signal initiates the conversion cycle. For best results, the encode command should contain as little jitter as possible. High speed layout practices must be followed to ensure optimum A/D performance. The AD9022 is built on a trench isolated bipolar process and utilizes an innovative multipass architecture (see the block diagram). The unit is packaged in 28-lead ceramic DIPs and gullwing surface mount packages. The AD9022 is specified to operate over the industrial to +85C) and military to +125C) temperature ranges.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: Fax: 781/326-8703 Analog Devices, Inc., 1998

Parameter (Conditions) RESOLUTION DC ACCURACY Differential Nonlinearity Integral Nonlinearity No Missing Codes Offset Error Gain Error Thermal Noise ANALOG INPUT Input Voltage Range Input Resistance Input Capacitance Analog Bandwidth SWITCHING PERFORMANCE 1 Minimum Conversion Rate Maximum Conversion Rate Aperture Delay (tA) Aperture Uncertainty (Jitter) Output Delay (tOD) ENCODE INPUT Logic Compatibility Logic "1" Voltage Logic "0" Voltage Logic "1" Current Logic "0" Current Input Capacitance Pulsewidth (High) Pulsewidth (Low) DYNAMIC PERFORMANCE Transient Response Overvoltage Recovery Time Harmonic Distortion Analog Input @ 1.2 MHz @ 1.2 MHz @ 4.3 MHz @ 9.6 MHz @ 9.6 MHz Signal-to-Noise Ratio 2 Analog Input @ 1.2 MHz @ 1.2 MHz @ 4.3 MHz @ 9.6 MHz @ 9.6 MHz Signal-to-Noise Ratio 2 (Without Harmonics) Analog Input @ 1.2 MHz @ 1.2 MHz @ 4.3 MHz @ 9.6 MHz @ 9.6 MHz +25C Full +25C Full +25C Full +25C Full VI V Temp

(+VS +5 V; VS 5.2 V; Encode = 20 MSPS, unless otherwise noted)
Full +25C Full +25C Full +25C Full +25C Full +25C Full +25C Full

Parameter (Conditions) Two-Tone Intermodulation Distortion Rejection3 DIGITAL OUTPUTS1 Logic Compatibility Logic "1" Voltage Logic "0" Voltage Output Coding POWER SUPPLY +VS Supply Voltage +VS Supply Current VS Supply Voltage VS Supply Current Power Dissipation Power Supply Rejection Ratio (PSRR) 4 Temp +25C Test Level V AD9022AQ/AZ Min Typ Max 74 TTL Full 2.4 0.5 Offset Binary Offset Binary AD9022BQ/BZ Min Typ Max 74 TTL 2.4 0.5 Offset Binary AD9022SQ/SZ Min Typ Max 74 TTL V Units dBc

NOTES 1 AD9022 load is a single LS latch. 2 RMS signal-to-rms noise with analog input signal 1 dB below full scale at specified frequency. Tested at 55% duty cycle. 3 Intermodulation measured with analog input frequencies of 8.9 MHz and 9.8 MHz 7 dB below full scale. 4 PSRR is sensitivity of offset error to power supply variations within the 5% limits shown. Specifications subject to change without notice.

Model Temperature Range Package Description Package Option Q-28 Z-28

+VS. VS.6 V Analog Input. +1.5 V Digital Inputs. +VS 0 V Digital Output Current. 20 mA Operating Temperature Range to +125C Maximum Junction Temperature2. +175C Lead Temperature (Soldering, 10 sec). +300C Storage Temperature Range. to +150C

NOTES 1 Absolute maximum ratings are limiting values to be applied individually, and beyond which the serviceability of the circuit may be impaired. Functional operability is not necessarily implied. Exposure to absolute maximum rating conditions for an extended period of time may affect device reliability. 2 Typical thermal impedances: "Q" Package (Ceramic DIP): = 35C/W. "Z" Package (Gullwing Surface Mount): = 45C/W.

28-Lead Ceramic DIP 28-Pin Ceramic Leaded Chip Carrier +125C 28-Lead Ceramic DIP +125C 28-Pin Ceramic Leaded Chip Carrier


Related products with the same datasheet
Some Part number from the same manufacture Analog Devices
AD9022SZ ADC, Ttl-compatible Logic: 12-bit
AD9032 12-bit 25 MSPS A/D Converter
AD9040 Complete 10-Bit Monolithic Sampling A/D Converter (ADC) With On-board Track-and-hold And Reference
AD9040APCB 10-bit 40 MSPS A/D Converter
AD9042 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042D 12-bit, 41 MSPS Monolithic A/D Converter
AD9042D/PCB 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042DPCB 12-bit, 41 MSPS Monolithic A/D Converter
AD9042ST/PCB 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042STPCB 12-bit, 41 MSPS Monolithic A/D Converter
AD9048 Monolithic 8-Bit Video A/D Converter
AD9048SE Monolithic 8-bit Video A/D Converter
AD9048SE2 Monolithic 8-Bit Video A/D Converter
AD9048SQ Monolithic 8-bit Video A/D Converter
AD9048SQ2 Monolithic 8-Bit Video A/D Converter
AD9048TE Monolithic 8-bit Video A/D Converter
AD9048TE2 Monolithic 8-Bit Video A/D Converter
AD9048TQ Monolithic 8-bit Video A/D Converter
AD9048TQ2 Monolithic 8-Bit Video A/D Converter
AD9049 9-Bit, 30 MSPS ADC

AD2S100 : ac Vector Processor

AD7666ACP : 16-Bit, 500 KSPS Sar Unipolar ADC With Ref

AME8500CEETCE28 : 3-Pin/5-Pin Micropower P Reset Family

AME8501AEETCD24 : 3-Pin/5-Pin Micropower P Reset Family

AME8500AEEVBE27 : Uprocessor Supervisory

SMP11GY : Low Droop Rate/accurate Sample-andhold Amplifiers

EVAL-INAMP-82RMZ : Eval Board - Op Amp Programmers, Development System; BOARD EVAL FOR AD8220 MSOP Specifications: Board Type: Fully Populated ; Amplifier Type: Instrumentation ; Output Type: Single-Ended ; -3db Bandwidth: 1.5MHz ; Slew Rate: 2 V/s ; Current - Supply (Main IC): 750A ; Current - Output / Channel: 15mA ; Voltage - Supply, Single/Dual (): 4.6 V ~ 36 V, 2.3 V ~ 18 V ; Supplied Co

ADSP-21061KSZ-133 : ADSP-2106x Sharc DSP Microcomputer Family

ADM6316LARJ35DZ-RL : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

0-C     D-L     M-R     S-Z