Details, datasheet, quote on part number: AD9040APCB
CategoryMultimedia => Video => A/D Converters
Description10-bit 40 MSPS A/D Converter
CompanyAnalog Devices
DatasheetDownload AD9040APCB datasheet


Features, Applications

FEATURES Low Power: 53 dB SNR @ 10 MHz AIN On-Chip T/H, Reference CMOS-Compatible 2 V p-p Analog Input Fully Characterized Dynamic Performance APPLICATIONS Ultrasound Medical Imaging Digital Oscilloscopes Professional Video Digital Communications Advanced Television (MUSE Decoders) Instrumentation

The is a complete 10-bit monolithic sampling analogto-digital converter (ADC) with on-board track-and-hold and reference. The unit is designed for low cost, high performance applications and requires only an encode signal to achieve 40 MSPS sample rates with 10-bit resolution. Digital inputs and outputs are CMOS compatible; the analog input requires a signal 2 V p-p amplitude. The two-step architecture used in the AD9040A is optimized to provide the best dynamic performance available while maintaining low power requirements of only 940 mW typically; maximum dissipation is 1.1 watt at 40 MSPS. The signal-to-noise ratio (SNR), including harmonics, is 53 dB, or 8.5 ENOB, when sampling an analog input of 10.3 MHz at 40 MSPS. Competitive devices perform at less than 7.5 ENOB and require external references and larger input signals. The AD9040A A/D converter is available as either a 28-lead plastic DIP a 28-lead SOIC. The two models operate over a commercial temperature range to +70C. Contact the factory regarding availability of ceramic military temperature range devices.

1. CMOS compatible logic for direct interface to ASICs. 2. On-board T/H provides excellent high frequency performance on analog inputs, critical for communications and medical imaging applications. 3. High input impedance and 2 volt p-p input range reduce need for external amplifiers. 4. Easy to use; no cumbersome external voltage references required, allowing denser packing of ADCs for multichannel applications. 5. Available in 28-lead plastic DIP and SOIC packages. 6. Evaluation board includes AD9040AJR, reconstruction DAC, and latches. Space is available near the analog input and digital outputs of the converter for additional circuits. Order as part number AD9040A/PCB (schematic shown in data sheet).

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: Fax: 781/326-8703 Analog Devices, Inc., 1999

Parameter (Conditions) RESOLUTION DC ACCURACY Differential Nonlinearity Integral Nonlinearity No Missing Codes Gain Error Gain Tempco1 ANALOG INPUT Input Voltage Range Input Offset Voltage Input Bias Current Input Resistance Input Capacitance Analog Bandwidth BANDGAP REFERENCE Output Voltage Temperature Coefficient1 SWITCHING PERFORMANCE Maximum Conversion Rate Minimum Conversion Rate Aperture Delay (tA) Aperture Uncertainty (Jitter) Output Propagation Delay (tPD)2 DYNAMIC PERFORMANCE Transient Response Overvoltage Recovery Time Signal-to-Noise Ratio3 fIN = 2.3 MHz fIN = 10.3 MHz Signal-to-Noise Ratio3 (Without Harmonics) fIN = 2.3 MHz fIN = 10.3 MHz Signal-to-Noise Ratio3, 4 fIN = 2.3 MHz fIN = 10.3 MHz Signal-to-Noise Ratio3, 4 (Without Harmonics) fIN = 2.3 MHz fIN = 10.3 MHz 2nd Harmonic Distortion fIN = 2.3 MHz fIN = 10.3 MHz 3rd Harmonic Distortion fIN = 2.3 MHz fIN = 10.3 MHz Two-Tone Intermodulation Distortion Rejections Differential Phase Differential Gain +25C Full +25C Full +25C Full +25C Full +25C Full +25C Full +25C Full 51 50

Test Level Min AD9040AJN/JR Typ 10 1.0 Guaranteed Max Units Bits LSB % FS ppm/C V p-p k pF MHz V ppm/C MSPS ns ps, rms ns dB

Parameter (Conditions) ENCODE INPUT Logic "1" Voltage Logic "0" Voltage Logic "1" Current Logic "0" Current Input Capacitance Encode Pulsewidth (High) (tEH)6 Encode Pulsewidth (Low) (tEL)6 DIGITAL OUTPUTS Logic "1" Voltage Logic "0" Voltage Output Coding POWER SUPPLY VD Supply Current +VS Supply Current VS Supply Current Power Dissipation Power Supply Rejection Ratio (PSRR)7 Temp Full +25C Full Test Level IV VI Min Offset Binary Full VI I

NOTES 1 "Gain Tempco" is for converter using internal reference; "Temperature Coefficient" is for bandgap reference only. 2 Output propagation delay (t PD) is measured from the 50% point of the falling edge of the encode command to the min/max voltage levels of the digital outputs with 10 pF maximum loads. 3 RMS signal to rms noise with analog input signal 1 dB below full scale at specified frequency. 4 ENCODE = 32 MSPS. 5 3rd order intermodulation measured with analog input frequencies of 2.3 MHz and 2.4 MHz 7 dB below full scale. 6 For rated performance at 40 MSPS, duty cycle of encode command should be Measured as the ratio of the change in offset voltage for a 5% change S or VS. Specifications subject to change without notice.

VS. 7 V VD. +7 V ANALOG IN. VS to +VS DIGITAL INPUTS. V to +VS VREF Input. V to +VS Digital Output Current. 20 mA Operating Temperature to +70C Storage Temperature. to +150C Maximum Junction Temperature2 (JN/JR Suffixes). +150C Lead Soldering Temp (10 sec). +300C

NOTES 1 Absolute maximum ratings are limiting values to be applied individually, and beyond which the serviceability of the circuit may be impaired. Functional operability is not necessarily implied. Exposure to absolute maximum rating conditions for an extended period of time may affect device reliability. 2 Typical thermal impedances (parts soldered to board): N Package (Plastic DIP): 10C/W. R Package (SOIC): = 10C/W.

100% Production Tested. 100% production tested at +25C, and sample tested at specified temperatures. AC testing done on sample basis. III Sample Tested Only. IV Parameter is guaranteed by design and characterization testing. V Parameter is a typical value only. VI All devices are 100% production tested +25C. 100% production tested at temperature extremes for military temperature devices; guaranteed by design and characterization testing for industrial devices.

+70C 28-Lead Plastic DIP +70C 28-Lead SOIC Package Printed Circuit Board (Only) of Evaluation Circuit Complete Evaluation Board, Assembled and Tested, Including AD9040AJR 3


Related products with the same datasheet
Some Part number from the same manufacture Analog Devices
AD9040APWB 10-bit 40 MSPS A/D Converter
AD9042 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042D 12-bit, 41 MSPS Monolithic A/D Converter
AD9042D/PCB 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042DPCB 12-bit, 41 MSPS Monolithic A/D Converter
AD9042ST/PCB 12-Bit, 41 MSPS Monolithic A/D Converter
AD9042STPCB 12-bit, 41 MSPS Monolithic A/D Converter
AD9048 Monolithic 8-Bit Video A/D Converter
AD9048SE Monolithic 8-bit Video A/D Converter
AD9048SE2 Monolithic 8-Bit Video A/D Converter
AD9048SQ Monolithic 8-bit Video A/D Converter
AD9048SQ2 Monolithic 8-Bit Video A/D Converter
AD9048TE Monolithic 8-bit Video A/D Converter
AD9048TE2 Monolithic 8-Bit Video A/D Converter
AD9048TQ Monolithic 8-bit Video A/D Converter
AD9048TQ2 Monolithic 8-Bit Video A/D Converter
AD9049 9-Bit, 30 MSPS ADC
AD9050 10-Bit, 40 MSPS/60 MSPS A/D Converter
AD9051 10-Bit, 60 MSPS A/D Converter
AD9051-2V 10-bit, 60 MSPS A/D Converter
AD9051-2V/PCB 10-Bit, 60 MSPS A/D Converter

ADP3308ART-3.6 : AnyCAP® 50 ma Low Dropout Linear Regulator

AIC1680-C59CU : Ultra Low Power Voltage Detector

AME8501CEFTCF44 : 3-Pin/5-Pin Micropower P Reset Family

AIC1722A-38CZTBG : 300ma Low Dropout Linear Regulator

AD7927WYRUZ-REEL7 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) * Tape & Reel (TR) Single Supply; IC ADC 12BIT 8CH W/SEQ 20TSSOP Specifications: Number of Bits: 12 ; Package / Case: 20-TSSOP (0.173", 4.40mm Width) ; Data Interface: DSP, MICROWIRE, QSPI, Serial, SPI ; Packaging: Tape & Reel (TR) ; Sampling Rate (Per Second): 200k ; Operating Temperature: - ; Voltage Supply Source: Single Supply ; Number of Inputs and Ty

AD5311BRTZ-500RL7 : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tape & Reel (TR) Single Supply; IC DAC 10BIT 2WIRE W/BUF SOT23-6 Specifications: Data Interface: I²C, Serial ; Number of Bits: 10 ; Operating Temperature: -40C ~ 105C ; Package / Case: SOT-23-6 ; Packaging: Tape & Reel (TR) ; Voltage Supply Source: Single Supply ; Settling Time: 7s ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

AD5440YRUZ-REEL7 : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tube Single Supply; IC DAC 10BIT DUAL MULT 24TSSOP Specifications: Data Interface: Parallel ; Number of Bits: 10 ; Operating Temperature: -40C ~ 125C ; Package / Case: 24-TSSOP (0.173", 4.40mm Width) ; Packaging: Tube ; Voltage Supply Source: Single Supply ; Settling Time: 35ns ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

PM7528HSRZ : Data Acquisition - Digital To Analog Converter Integrated Circuit (ics) Cut Tape (CT) Single Supply; IC DAC 8BIT DUAL MULTIPLY 20SOIC Specifications: Data Interface: Parallel ; Number of Bits: 8 ; Operating Temperature: 0C ~ 70C ; Package / Case: 20-SOIC (0.295", 7.50mm Width) ; Packaging: Cut Tape (CT) ; Voltage Supply Source: Single Supply ; Settling Time: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EVAL-CN0225-SDPZ : Eval And Demo Board And Kit Programmers, Development System; EVAL BOARD FOR CN0225 Specifications: Main Purpose: Interface, Analog Front End (AFE) ; Primary Attributes: Signal Conditioner ; Secondary Attributes: Industrial Process Control and Automation ; Supplied Contents: Board ; Utilized IC / Part: AD7687, AD8275, AD8295, ADR431 ; Embedded: No ; Lead Free Status: Lead Free ; Ro

AD7714YRZ : 5-CH 24-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PDSO24 Specifications: Package Type: SOIC, WSOIC-24 ; Screening Level: Industrial ; Pins: 24 ; Operating Temperature: -40 to 105 C (-40 to 221 F) ; ADC Type: Sigma-Delta ; Input Voltage: -1.25 to 1.25 volts


AMP03GSZ-REEL : INSTRUMENTATION AMPLIFIER, 2000 uV OFFSET-MAX, 3 MHz BAND WIDTH, PDSO8 Specifications: Closed-Loop Gain (AVCL): 1 V/V ; CMRR: 75 dB ; Slew Rate: 9.5 V/µs ; Supply Voltage (VS): 15 volts ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: SOIC, SOIC-8

Same catergory

AD830 : Preamp/Amp. High Speed, Video Difference Amplifier. Differential Amplification Wide Common-Mode Voltage Range: 12 V Differential Voltage Range: 2 V High CMRR: @ 4 MHz Built-in Differential Clipping Level: 2.3 V Fast Dynamic Performance 85 MHz Unity Gain Bandwidth 35 ns Settling Time V/ s Slew Rate Symmetrical Dynamic Response Excellent Video s Differential Gain Error: 0.06% Differential Phase Error:.

AN8072N : Stereo/Quad Channel. Multi Output Power Supply Regulator. The is a multi-output IC designed for power supply regulator incorporating 5-ch positive output power supply which 2-ch 8V output, 2-ch 10V output and 1-ch 10V output. It is most suitable for equipments which need multi supply voltage supply. Low power consumption : ICC =1.6mA typ. Overvoltage, output short protection built-in 5-ch constant voltage.

BU2279F : . an IC that generates multiple clocks from the built-in PLL by inputting standard clocks from outside. This IC is suitable for digital appliances. 54 MHz for video and 33.333MHz of digital system clock for CPU can be generated from widely used 13.5 MHz clock. z 1) Clock signals are generated by crystal oscillator. 2) SOP16 package. 3) Single power supply.

LM4853 : Boomer Audio Power Amplifiers. LM4853 - Mono 1.5 W / Stereo 300mW Power Amplifier, Package: Llp, Pin Nb=14.

LM4900LD : Boomer Audio Power Amplifiers. LM4900 - 265mW at 3.3V Supply Audio Power Amplifier With Shutdown Mode, Package: Llp, Pin Nb=8.

M52723ASP : Video Switches.

MAX466 : RGB Video Amp. Two-channel, Triple/quad RGB Video Switches And Buffers.

NJM2067 : 3V Auto-reverse Dual Pre-amplifier.

NJM2247A : Video Color Super Imposer.

SAA7182BH : . Preliminary Supersedes data of 1995 Sep 19 File under Integrated Circuits, IC22 1996 Jul 08 CMOS 5 V device Digital PAL/NTSC/SECAM encoder System pixel frequency 13.5 MHz Accepts MPEG decoded data on 8-bit wide input port. Input data format Cb, Y, Cr etc. or Y and Cb, on 16 lines ("CCIR 656") Three DACs for CVBS, Y and C operating at 27 MHz with 10-bit.

SL2610 : Tuners->Multiband Tuners. SL2610 - Wide Dynamic Range Image Reject Mopll.

SM5849 : Sample Rate Converters and System chips. Asynchronous Digital Sample Rate Converter, Input Sampling Frequency (2-100KHz), 16, 20, 24 Bit Output.

TMC2246Ax2 : Image Filter. 60 MHz computation rate 60 MHz data and coefficient input Four x 10-bit multipliers Individual data and coefficient inputs 25-Bit accumulator Fractional and integer two's complement data formats Input and output data latches with user-configurable enables Selectable 16-bit rounded output Internal 1/2 LSB rounding Available in 120-pin CPGA, PPGA, MPGA,.

W561M02 : 4-CH Melody With Voice Synthesizer(banddirectortm Family). W561XXX 4-CH MELODY WITH VOICE SYNTHESIZER (BandDirectorTM Family) The W561xxx is one of the derivatives of the BandDirectorTM familiy. It consists a 4-bit C, two voice synthesizers, one 4-CH Melody generator, and one shared ROM. The muti-tasking operation for voice synthesis and 4-CH Melody generation is implemented by dedicated H/W that can output.

WM8960 : The WM8960 is a low power, high quality stereo codec designed for portable applications such as Digital still camera or Digital Camcorde.

TAS5613 : 150W Stereo PurePath(TM) HD Analog-Input Power Stage The TAS5613 is a high-performance analog input Class D amplifier with integrated closed loop feedback technology (known as PurePath HD). It has the ability to drive up to 150 W(1) Stereo into 4 speakers from a single 36V supply. PurePath HD technology enables traditional AB-Amplifier performance.

0-C     D-L     M-R     S-Z