Details, datasheet, quote on part number: AD9060KE
PartAD9060KE
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit
Description10-Bit 75 MSPS A/D Converter
CompanyAnalog Devices
DatasheetDownload AD9060KE datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES Monolithic 10-Bit/75 MSPS Converter ECL Outputs Bipolar (1.75 V) Analog Input 57 dB SNR @ 2.3 MHz Input Low (45 pF) Input Capacitance MIL-STD-883 Compliant Versions Available APPLICATIONS Digital Oscilloscopes Medical Imaging Professional Video Radar Warning/Guidance Systems Infrared Systems

The AD9060 A/D converter a 10-bit monolithic converter capable of word rates of 75 MSPS and above. Innovative architecture using 512 input comparators instead of the traditional 1024 required by other flash converters reduces input capacitance and improves linearity. Inputs and outputs are ECL-compatible, which makes the AD9060 the recommended choice for systems with conversion rates >30 MSPS to minimize system noise. An overflow bit is provided to indicate analog input signals greater than +VSENSE. Voltage sense lines are provided to ensure accurate driving of the VREF voltages applied to the units. Quarter-point taps on the resistor ladder help optimize the integral linearity of the unit. Either 68-pin ceramic leaded (gull wing) packages or ceramic LCCs are available and specifically designed for low thermal impedances. Two performance grades for temperatures of both to +70C and to +125C ranges are offered to allow the user to select the linearity best suited for each application. Dynamic performance is fully characterized and production tested +25C. MIL-STD-883 units are available. The AD9060 A/D converter is available in versions compliant with MIL-STD-883. Refer to the Analog Devices Military Products Databook or current AD9060/883B data sheet for detailed specifications.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 World Wide Web Site: http://www.analog.com Fax: 617/326-8703 Analog Devices, Inc., 1997

+VS. +6 V VS. 6 V ANALOG IN. +2 V +VREF, VREF, +2 V +VREF to VREF. 4.0 V ENCODE, ENCODE. V to VS

1/2REF, 1/4REF Current. 10 mA Digital Output Current. 20 mA Operating Temperature to +70C Storage Temperature. to +150C Maximum Junction Temperature2. +175C Lead Soldering Temp (10 sec). +300C

Parameter (Conditions) RESOLUTION DC ACCURACY3 Differential Nonlinearity Integral Nonlinearity No Missing Codes ANALOG INPUT Input Bias Current4 Input Resistance Input Capacitance4 Analog Bandwidth REFERENCE INPUT Reference Ladder Resistance Ladder Tempco Reference Ladder Offset Top of Ladder Bottom of Ladder Offset Drift Coefficient SWITCHING PERFORMANCE Conversion Rate Aperture Delay (tA) Aperture Uncertainty (Jitter) Output Delay (tOD)5 Output Rise Time Output Fall Time Output Time Slew5 DYNAMIC PERFORMANCE Transient Response Overvoltage Recovery Time Effective Number of Bits (ENOB) fIN = 2.3 MHz fIN = 10.3 MHz fIN = 29.3 MHz Signal-to-Noise Ratio6 fIN = 2.3 MHz fIN = 10.3 MHz fIN = 29.3 MHz +25C Full +25C Full +25C Full +25C Full +25C Full +25C Full IV I Temp Test Level Min 10

Parameter (Conditions) DYNAMIC PERFORMANCE (CONTINUED) Signal-to-Noise Ratio6 (Without Harmonics) fIN = 2.3 MHz fIN = 10.3 MHz fIN = 29.3 MHz Harmonic Distortion fIN = 2.3 MHz fIN = 10.3 MHz fIN = 29.3 MHz Two-Tone Intermodulation Distortion Rejection7 Differential Phase Differential Gain ENCODE INPUT Logic "1" Voltage Logic "0" Voltage Logic "1" Current Logic "0" Current Input Capacitance Pulse Width (High) Pulse Width (Low) DIGITAL OUTPUTS Logic "1" Voltage Logic "0" Voltage POWER SUPPLY +VS Supply Current VS Supply Current Power Dissipation Power Supply Rejection Ratio (PSRR)8 Temp Test Level Min AD9060JE/JZ Typ Max Min AD9060KE/KZ Typ Max Units

NOTES 1 Absolute maximum ratings are limiting values to be applied individually and beyond which the serviceability of the circuit may be impaired. Functional operability is not necessarily implied. Exposure to absolute maximum rating conditions for an extended period of time may affect device reliability. 2 Typical thermal impedances (part soldered onto board): 68-pin leaded ceramic chip carrier: = 17C/W (no air flow); = 15C/W (air flow = 500 LFM). 68-pin ceramic LCC: = 15C/W (no air flow); = 13C/W (air flow = 500 LFM). 3/4REF, 1/2REF and 1/4REF reference ladder taps are driven from dc sources 0 V and 0.875 V, respectively. Outputs terminated through < 4 pF. Accuracy of the overflow comparator is not tested and not included in linearity specifications. 4 Measured with ANALOG = +V SENSE 5 Output delay measured as worst-case time from 50% point of the rising edge of ENCODE to 50% point of the slowest rising or falling edge D 0D9. Output skew measured as worst-case difference in output delay among 0D9. 6 RMS signal to rms noise with analog input signal 1 dB below full scale at specified frequency. 7 Intermodulation measured with analog input frequencies of 2.3 MHz and 3.0 MHz 7 dB below full scale. 8 Measured as the ratio of the worst-case change in transition voltage of a single comparator for a 5% change S or VS. Specifications subject to change without notice.


 

Related products with the same datasheet
AD9060/PCB
AD9060J
AD9060JE
AD9060JE/JZ
AD9060JZ
AD9060K
AD9060KE/KZ
AD9060KZ
AD9060S
AD9060SE2
AD9060SZ2
Some Part number from the same manufacture Analog Devices
AD9060KE/KZ 10-Bit 75 MSPS A/D Converter
AD9060SE 10-bit 75 MSPS A/D Converter
AD9060SE2 10-Bit 75 MSPS A/D Converter
AD9060SZ 10-bit 75 MSPS A/D Converter
AD9060SZ2 10-Bit 75 MSPS A/D Converter
AD9060TE 10-bit 75 MSPS A/D Converter
AD9060TE2 10-Bit 75 MSPS A/D Converter
AD9060TZ 10-bit 75 MSPS A/D Converter
AD9060TZ2 10-Bit 75 MSPS A/D Converter
AD9066 Dual, 6-Bit, 60 MSPS Monlithic A/D Converter
AD9066JR Dual 6-bit, 60 MSPS Monolithic A/D Converter
AD9070 10-Bit, 100 MSPS A/D Converter
AD9071
AD9100 Ultrahigh Speed Monolithic Track-and-hold
AD9101 125 MSPS Monolithic Sampling Amplifier
AD9200 Complete 10-Bit, 20 Msps, 80 MW CMOS A/D Converter
AD9200ARSRL Complete 10-bit, 20 Msps, 80 MW CMOS A/D Converter
AD9200JRS Complete 10-Bit, 20 Msps, 80 MW CMOS A/D Converter
AD9200KSTRL Complete 10-bit, 20 Msps, 80 MW CMOS A/D Converter
AD9201 Dual Channel 20 MHZ 10-Bit Resolution CMOS ADC
AD9202 Complete 10-bit, 32 Msps, 90 MW CMOS A/D Converter

AD8513ARU : Precision Low Noise Single JFET Operational Amplifier

AME8500AEETAE28 : 3-Pin/5-Pin Micropower P Reset Family

ADT6501 : The ADT6501/ADT6502/ADT6503/ADT6504 are trip point temperature switches available in a 5-lead SOT23 package. It contains an internal band gap temperature sensor for local temperature sensing. When the temperature crosses the trip point setting, the logic output is activated. The ADT6501/ ADT6503 log

AD7524JR-REEL : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tape & Reel (TR) Single Supply; IC DAC 8BIT MULTIPLYING 16-SOIC Specifications: Data Interface: Parallel ; Number of Bits: 8 ; Operating Temperature: -40C ~ 85C ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Voltage Supply Source: Single Supply ; Settling Time: 250ns ; RoHS Status: RoHS Non-Compliant

ADG811YCPZ-REEL : Interface - Analog Switches, Multiplexers, Demultiplexer Integrated Circuit (ics); IC SWITCH QUAD SPST 16LFCSP Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ADM6316BZ32ARJZ-R7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, ROHS COMPLIANT, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADM6317HARJ28CZ-RL : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADM6317HARJ33BZ-R7 : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADM6317HARJ44DZ-RL : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADM6318CY28ARJ-RL : IC,POWER SUPPLY SUPERVISOR,TSOP,5PIN,PLASTIC

ADM6318CY48ARJ-R7 : IC,POWER SUPPLY SUPERVISOR,TSOP,5PIN,PLASTIC

ADM6320PARJ30BY-RL : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

 
0-C     D-L     M-R     S-Z