Details, datasheet, quote on part number: AD9060SE
PartAD9060SE
CategoryMultimedia => Video => A/D Converters
Description10-bit 75 MSPS A/D Converter
CompanyAnalog Devices
DatasheetDownload AD9060SE datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES Monolithic 10-Bit/75 MSPS Converter ECL Outputs Bipolar (1.75 V) Analog Input 57 dB SNR @ 2.3 MHz Input Low (45 pF) Input Capacitance MIL-STD-883 Compliant Versions Available APPLICATIONS Digital Oscilloscopes Medical Imaging Professional Video Radar Warning/Guidance Systems Infrared Systems

The AD9060 A/D converter a 10-bit monolithic converter capable of word rates of 75 MSPS and above. Innovative architecture using 512 input comparators instead of the traditional 1024 required by other flash converters reduces input capacitance and improves linearity. Inputs and outputs are ECL-compatible, which makes the AD9060 the recommended choice for systems with conversion rates >30 MSPS to minimize system noise. An overflow bit is provided to indicate analog input signals greater than +VSENSE. Voltage sense lines are provided to ensure accurate driving of the VREF voltages applied to the units. Quarter-point taps on the resistor ladder help optimize the integral linearity of the unit. Either 68-pin ceramic leaded (gull wing) packages or ceramic LCCs are available and specifically designed for low thermal impedances. Two performance grades for temperatures of both to +70C and to +125C ranges are offered to allow the user to select the linearity best suited for each application. Dynamic performance is fully characterized and production tested +25C. MIL-STD-883 units are available. The AD9060 A/D converter is available in versions compliant with MIL-STD-883. Refer to the Analog Devices Military Products Databook or current AD9060/883B data sheet for detailed specifications.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 World Wide Web Site: http://www.analog.com Fax: 617/326-8703 Analog Devices, Inc., 1997

+VS. +6 V VS. 6 V ANALOG IN. +2 V +VREF, VREF, +2 V +VREF to VREF. 4.0 V ENCODE, ENCODE. V to VS

1/2REF, 1/4REF Current. 10 mA Digital Output Current. 20 mA Operating Temperature to +70C Storage Temperature. to +150C Maximum Junction Temperature2. +175C Lead Soldering Temp (10 sec). +300C

Parameter (Conditions) RESOLUTION DC ACCURACY3 Differential Nonlinearity Integral Nonlinearity No Missing Codes ANALOG INPUT Input Bias Current4 Input Resistance Input Capacitance4 Analog Bandwidth REFERENCE INPUT Reference Ladder Resistance Ladder Tempco Reference Ladder Offset Top of Ladder Bottom of Ladder Offset Drift Coefficient SWITCHING PERFORMANCE Conversion Rate Aperture Delay (tA) Aperture Uncertainty (Jitter) Output Delay (tOD)5 Output Rise Time Output Fall Time Output Time Slew5 DYNAMIC PERFORMANCE Transient Response Overvoltage Recovery Time Effective Number of Bits (ENOB) fIN = 2.3 MHz fIN = 10.3 MHz fIN = 29.3 MHz Signal-to-Noise Ratio6 fIN = 2.3 MHz fIN = 10.3 MHz fIN = 29.3 MHz +25C Full +25C Full +25C Full +25C Full +25C Full +25C Full IV I Temp Test Level Min 10

Parameter (Conditions) DYNAMIC PERFORMANCE (CONTINUED) Signal-to-Noise Ratio6 (Without Harmonics) fIN = 2.3 MHz fIN = 10.3 MHz fIN = 29.3 MHz Harmonic Distortion fIN = 2.3 MHz fIN = 10.3 MHz fIN = 29.3 MHz Two-Tone Intermodulation Distortion Rejection7 Differential Phase Differential Gain ENCODE INPUT Logic "1" Voltage Logic "0" Voltage Logic "1" Current Logic "0" Current Input Capacitance Pulse Width (High) Pulse Width (Low) DIGITAL OUTPUTS Logic "1" Voltage Logic "0" Voltage POWER SUPPLY +VS Supply Current VS Supply Current Power Dissipation Power Supply Rejection Ratio (PSRR)8 Temp Test Level Min AD9060JE/JZ Typ Max Min AD9060KE/KZ Typ Max Units

NOTES 1 Absolute maximum ratings are limiting values to be applied individually and beyond which the serviceability of the circuit may be impaired. Functional operability is not necessarily implied. Exposure to absolute maximum rating conditions for an extended period of time may affect device reliability. 2 Typical thermal impedances (part soldered onto board): 68-pin leaded ceramic chip carrier: = 17C/W (no air flow); = 15C/W (air flow = 500 LFM). 68-pin ceramic LCC: = 15C/W (no air flow); = 13C/W (air flow = 500 LFM). 3/4REF, 1/2REF and 1/4REF reference ladder taps are driven from dc sources 0 V and 0.875 V, respectively. Outputs terminated through < 4 pF. Accuracy of the overflow comparator is not tested and not included in linearity specifications. 4 Measured with ANALOG = +V SENSE 5 Output delay measured as worst-case time from 50% point of the rising edge of ENCODE to 50% point of the slowest rising or falling edge D 0D9. Output skew measured as worst-case difference in output delay among 0D9. 6 RMS signal to rms noise with analog input signal 1 dB below full scale at specified frequency. 7 Intermodulation measured with analog input frequencies of 2.3 MHz and 3.0 MHz 7 dB below full scale. 8 Measured as the ratio of the worst-case change in transition voltage of a single comparator for a 5% change S or VS. Specifications subject to change without notice.


 

Related products with the same datasheet
AD9060SZ
AD9060TE
AD9060TZ
Some Part number from the same manufacture Analog Devices
AD9060SE2 10-Bit 75 MSPS A/D Converter
AD9060SZ 10-bit 75 MSPS A/D Converter
AD9060SZ2 10-Bit 75 MSPS A/D Converter
AD9060TE 10-bit 75 MSPS A/D Converter
AD9060TE2 10-Bit 75 MSPS A/D Converter
AD9060TZ 10-bit 75 MSPS A/D Converter
AD9060TZ2 10-Bit 75 MSPS A/D Converter
AD9066 Dual, 6-Bit, 60 MSPS Monlithic A/D Converter
AD9066JR Dual 6-bit, 60 MSPS Monolithic A/D Converter
AD9070 10-Bit, 100 MSPS A/D Converter
AD9071
AD9100 Ultrahigh Speed Monolithic Track-and-hold
AD9101 125 MSPS Monolithic Sampling Amplifier
AD9200 Complete 10-Bit, 20 Msps, 80 MW CMOS A/D Converter
AD9200ARSRL Complete 10-bit, 20 Msps, 80 MW CMOS A/D Converter
AD9200JRS Complete 10-Bit, 20 Msps, 80 MW CMOS A/D Converter
AD9200KSTRL Complete 10-bit, 20 Msps, 80 MW CMOS A/D Converter
AD9201 Dual Channel 20 MHZ 10-Bit Resolution CMOS ADC
AD9202 Complete 10-bit, 32 Msps, 90 MW CMOS A/D Converter
AD9203 10-Bit, 40 Msps, Low-power Analog-to-digital Converter
AD9214 10-Bit, 105 MSPS Analog-to-digital Converter

AD820 :

ADP3307-3 : High Accuracy AnyCAP® 100 ma Low Dropout Linear Regulator

AD8061ARZ-REEL : Low Cost, 300 MHz Rail-to-rail Amplifiers

AME8845BEDT150Z : 3A CMOS LDO

ADV7520NKBBCZRL-80 : Low Power Hdmi/dvi Transmitter with Consumer Electronic Control (cec)

EVAL-AD7982CBZ : 50/s Yaw Rate Gyro

TMP36FS-REEL : Temperature IC SENSOR TEMP 2.7/5.5V 8SOIC -; IC SENSOR TEMP 2.7/5.5V 8SOIC Specifications: Voltage - Supply: 2.7 V ~ 5.5 V ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Cut Tape (CT) ; Output Type: Voltage ; Sensing Temperature: -40C ~ 125C ; RoHS Status: RoHS Non-Compliant

ADM811RARTZ-REEL7 : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Digi-Reel 1; IC SUPERVISER RST 2.63V SOT-143 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active Low ; Package / Case: TO-253-4, TO-253AA ; Packaging: Digi-Reel ; Number of Voltages Monitored: 1 ; Reset Timeout: 140 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 2.63V ; Operating Temperature: -40C ~ 85C ; Le

ADM6317HARJ43BZ-RL : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADUM4153ARIZ : Digital Isolators 7 Ch Isolator f or SPI Interface Analog Devices ADuM415x SPIsolator Digital Isolators feature iCoupler technology and allow designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints associated with optocouplers.  The SPIsolator digital isolators are dedicated a seri

Same catergory

5962-9474801QXA : Color Palettes. ti TLC34076-135, Video InterfacE PALette. IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor.

AN5272 : Stereo/Quad Channel. 4.0 W X 2 ( 18 v, 8 Ohm ) Power Amplifier With Variable Audio Output And Volume Control.

AN5285K : Package =. The is a stereo automatic volume control IC for reducing a difference in volume between broadcasting stations and between programs. is a kind of AGC circuit and reduces a sudden change in sound signal amplitude by using a proper time constant. Sound level AGC function by VCA gain control Prevention of S/N ratio degradation by reducing VCA gain at no signal.

CS6654 : MPEG-2 Video. 4-stream Video Decoder. The CS6652/CS6654 MPEG-2 multi-stream video decoders provide high performance solutions for applications requiring simultaneous real-time decoding and display of multiple video streams. The CS6652 and CS6654 provide to 2 and 4 MPEG-2 MP@ML or 4:2:2P@ML video elementary streams respectively. These high performance application specific cores can be configured.

M52758FP : Video Switches.

M62502FP : Sync/Deflection. PWM ic For The Synchronized Deflection System Control.

PCM3001 : . For most current data sheet and other product information, visit www.burr-brown.com q MONOLITHIC 18-BIT ADC AND DAC OR 18-BIT INPUT/OUTPUT DATA q STEREO ADC: Single-ended Voltage Input 64X Oversampling High Performance: 88dB THD+N 94dB SNR 94dB Dynamic Range Digital High-Pass Filter q STEREO DAC: Single-ended Voltage Output Analog Low Pass Filter 64X Oversampling.

SC2005 : . S C 2 0 0 5 Single-Chip Source Decoder SDRAM I/Fs The SC2005 is the second-generation of LSI Logic's single-chip digital TV source decoders which incorporates ICAM technology used by the NDS VideoguardTM conditional access system. It is a highly integrated solution for designing cost-effective set-top boxes that support multiple targeted interactive.

STA013 : Mpeg 2.5 Layer Iii (MP3) Audio Decoder. SINGLE CHIP MPEG2 LAYER 3 DECODER SUPPORTING: - All specified for Layer III in ISO/IEC 11172-3 (MPEG 1 Audio) - All specified for Layer III in ISO/IEC 13818-3.2 (MPEG 2 Audio) - Lower sampling frequencies syntax extension, (not specified by ISO) called MPEG 2.5 DECODES LAYER III STEREO CHANNELS, DUAL CHANNEL, SINGLE CHANNEL (MONO) SUPPORTING ALL THE MPEG.

TWL1103TPBSQ1 : Voice-Band Codecs. ti TWL1103T-Q1, Automotive Catalog Voice-band Audio Processor (VBAP).

TWL1110 : . Handsets and Telecommunications Applications Two Differential Microphone Inputs Differential Earphone Outputs and One Single-Ended Earphone Output Earphone and Microphone Mute Programmable Transmit, Receive, and Sidetone Paths With Extended Gain and Attenuation Ranges Programmable for 15-Bit Linear Data or 8-Bit Companded (-law and A-law) Mode Supports.

WM9707 : WM9707 : AC'97 Revision 2.1 Audio Codec With Spdif Output.

LM2485 : 220V Triple Clamp with G1 Blank Amplifier The LM2485 is a triple channel clamp amplifier used to DC restore the AC coupled outputs of a DTV CRT driver and for cut-off adjustment. The LM2485 also has an integrated blanking amplifier that can be used to drive the G1 grid of a CRT negative for vertical retrace blanking. The blanking output has a selectable.

DAU1401 : SigmaDSP 28-/56-Bit Audio Processor with Two ADCs and Four DACs Product The ADAU1401 is a complete single-chip audio system with a 28-/56-bit audio DSP, ADCs, DACs, and microcontroller-like control interfaces. Signal processing includes equalization, cross-over, bass enhancement, multiband dynamics processing, delay compensation, speaker compensation,.

ISL99202 : 60mW, Capfree, Stereo Headphone Amplifier The ISL99202 is a stereo, capfree headphone amplifier. The wide operating voltage of 2.4V to 5.5V makes it versatile enough to be used in mobile battery powered applications powered by 2 AA or Single cell Li-Ion batteries as well as 3.3/5V power supply available notebook computers. The ISL99202 has robust RF immunity,.

AFE0064 : 64 Channel Analog Front End For Digital X-Ray Detector The AFE0064 is a 64 channel analog front end designed to suit the requirements of flat panel detector based digital X-ray systems. The device includes 64 integrators, a PGA for full scale charge level selection, correlated double sampler, 64 as to 2 multiplexer, and two differential output drivers.

STiH273 : HD Cable/terrestrial STB Processor With Integrated Demodulators And Low Power Standby Controller The STiH273 uses the latest process technology to provide a cost-effective, feature rich, highly integrated SoC for set-top boxes (STBs). It is targeted at the advanced decoding STB market across cable and terrestrial networks, and is suitable for operator.

 
0-C     D-L     M-R     S-Z