Details, datasheet, quote on part number: ADP3154JRU
PartADP3154JRU
CategoryAnalog & Mixed-Signal Processing => Power
TitlePower
DescriptionVRM 8.2/3/4 Buck Controller With One Linear Controllers
CompanyAnalog Devices
DatasheetDownload ADP3154JRU datasheet
Cross ref.Similar parts: LM20242, LM20323, LM20333, LM20343, LM25005, LM25116, LM25117, LM25117-Q1, LM25118, LM25118-Q1
Quote
Find where to buy
 
  

 

Features, Applications

5-Bit Programmable Dual Power Supply Controller for Pentium® III Processors ADP3154

VCC DRIVE1 DRIVE2 PGND AGND PWRGD SENSE+ SENSE­ DELAY NONOVERLAP DRIVE VREF +15% 2R CROWBAR IN OFF CMPI R gm VREF REFERENCE VLDO CMPT 1.20V OFF-TIME CONTROL VIN SENSE­ R VT1 VREF +5% VREF ­5%

FEATURES Active Voltage Positioning with Gain and Offset Adjustment Optimal Compensation for Superior Load Transient Response VRM 8.2, VRM 8.3 and VRM 8.4 Compliant 5-Bit Digitally Programmable 3.5 V Output Dual N-Channel Synchronous Driver Onboard Linear Regulator Controller Total Output Accuracy 1% Over Temperature High Efficiency, Current-Mode Operation Short Circuit Protection Overvoltage Protection Crowbar Protects Microprocessors with No Additional External Components Power Good Output TSSOP-20 Package APPLICATIONS Desktop PC Power Supplies for: Pentium II and Pentium III Processor Families AMD-K6 Processors VRM Modules GENERAL DESCRIPTION

The is a highly efficient synchronous buck switching regulator controller optimized for converting the 5 V main supply into the core supply voltage required by the Pentium III and other high performance processors. The ADP3154 uses an internal 5-bit DAC to read a voltage identification (VID) code directly from the processor, which is used to set the output voltage between 1.3 V and 3.5 V. The ADP3154 uses a current mode, constant off-time architecture to drive two external Nchannel MOSFETs at a programmable switching frequency that can be optimized for size and efficiency. It also uses a unique supplemental regulation technique called active voltage positioning to enhance load transient performance. Active voltage positioning results in a dc/dc converter that meets the stringent output voltage specifications for Pentium II and Pentium III processors, with the minimum number of output capacitors and smallest footprint. Unlike voltage-mode and standard current-mode architectures, active voltage positioning adjusts the output voltage as a function of the load current so that it is always optimally positioned for a system transient. The ADP3154 provides accurate and reliable short circuit protection and adjustable current limiting. It also includes an integrated overvoltage crowbar function to protect the microprocessor from destruction in case the core supply exceeds the nominal programmed voltage by more than 15%.

Pentium is a registered trademark of Intel Corporation. All other trademarks are the property of their respective holders.

The ADP3154 contains a linear regulator controller that is designed to drive an external N-channel MOSFET. This linear regulator is used to generate the auxiliary voltages (AGP, GTL, etc.) required in most motherboard designs, and has been designed to provide a high bandwidth load-transient response. A pair of external feedback resistors sets the linear regulator output voltage.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: http://www.analog.com Fax: 781/326-8703 © Analog Devices, Inc., 1999

Parameter OUTPUT ACCURACY 1.3 V Output Voltage 2.0 V Output Voltage 3.5 V Output Voltage OUTPUT VOLTAGE LINE REGULATION INPUT DC SUPPLY CURRENT Normal Mode Shutdown

CURRENT SENSE THRESHOLD VOLTAGE VID0­VID4 PINS THRESHOLD Low High VID0­VID4 PINS INPUT CURRENT VID0­VID4 PULL-UP RESISTANCE CT PIN DISCHARGE CURRENT

VID +25° C VOUT in Regulation VOUT 7000 pF (Drive C % Above Output Voltage % Below Output Voltage ­8 1.8

OFF-TIME DRIVER OUTPUT TRANSITION TIME POSITIVE POWER GOOD TRIP POINT

NEGATIVE POWER GOOD TRIP POINT POWER GOOD RESPONSE TIME CROWBAR TRIP POINT ERROR AMPLIFIER OUTPUT IMPEDANCE ERROR AMPLIFIER TRANSCONDUCTANCE ERROR AMPLIFIER MINIMUM OUTPUT VOLTAGE ERROR AMPLIFIER MAXIMUM OUTPUT VOLTAGE

VCROWBAR % Above Output Voltage ROERR gm(ERR) VCMPMIN VCMPMAX BWERR IFB VO2 SDL SDH SDIC VSENSE+ Forced to VOUT + 3% VSENSE+ Forced to VOUT ­ 3% CMP = Open

ERROR AMPLIFIER BANDWIDTH ­3 dB LINEAR REGULATOR FEEDBACK CURRENT LINEAR REGULATOR OUTPUT VOLTAGE SHUTDOWN (SD) PIN Low Threshold High Threshold Input Current

Figure 2, RPROG A 3.24 Part Active Part in Shutdown

NOTES 1All limits at temperature extremes are guaranteed via correlation using standard Statistical Quality Control (SQC) methods. 2Dynamic supply current is higher due to the gate charge being delivered to the external MOSFETs. 3The trip point is for the output voltage coming into regulation. Specifications subject to change without notice.

Mnemonic VID1­VID4, VID0 AGND FB NC VLDO SENSE­ SENSE+ CT CMP PWRGD VCC DRIVE2 DRIVE1 PGND

Function Voltage Identification DAC Inputs. These pins are pulled to an internal reference, providing a logic one if left open. The DAC output programs the SENSE­regulation voltage from 3.5 V. Leaving all five DAC inputs open results in placing the ADP3154 into shutdown. Analog Ground. All internal signals of the ADP3154 are referenced to this ground. Shutdown. A logic high will place the ADP3154 in shutdown and disable both outputs. This pin is internally pulled down. This pin is the feedback connection for the linear controller. Connect to the resistor divider network to set its output voltage. No Connect. Gate Drive for the Linear Regulator N-channel MOSFET. Connects to the internal resistor divider that senses the output voltage. This pin is also the reference input for the current comparator. The input for the current comparator. The output current is sensed as a voltage at this pin with respect to SENSE­. External capacitor CT connection to ground sets the off time of the device. Error Amplifier output and compensation point. The voltage at this output programs the output current control level between the SENSE pins. Power Good. An open drain signal indicates that the output voltage is within ± 5% regulation band. Supply Voltage to ADP3154. Gate Drive for the (bottom) synchronous rectifier N-channel MOSFET. The voltage at DRIVE2 swings from ground to VCC. Gate Drive for the buck switch N-channel MOSFET. The voltage at DRIVE1 swings from ground to VCC. Power Ground. The drivers turn off the buck and synchronous MOSFETs by discharging their gate capacitances to this pin. PGND should have a low impedance path to the source of the synchronous MOSFET.

Input Supply Voltage (VCC). +16 V Shutdown Input Voltage. +16 V Operating Ambient Temperature Range. to +70°C Junction Temperature Range. to +150°C JA. 110°C/W Storage Temperature Range. to +150°C Lead Temperature (Soldering, 10 sec). +300°C

*This is a stress rating only; operation beyond these limits can cause the device to be permanently damaged.

CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the ADP3154 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.


 

Some Part number from the same manufacture Analog Devices
ADP3155 VRM 8.2/3/4 Buck Controller With Two Linear Controllers
ADP3156 Fixed Output Buck Controller
ADP3156JR-15 Dual Power Supply Controller For Desktop Systems
ADP3156JR-2.5 Fixed Output Buck Controller
ADP3156JR-25 Dual Power Supply Controller For Desktop Systems
ADP3157 VRM 8.2/3/4 Buck Controller
ADP3158 4-Bit Programmable Synchronous Buck Controller
ADP3159
ADP3160 5-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3161 4-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3162 5-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3163 5-Bit Programmable 2-/3-Phase Synchronous Buck Controller
ADP3164 5-Bit Programmable 4-Phase Synchronous Buck Controller
ADP3166 5-Bit Programmable 2-, 3-, 4-Phase Synchronous Buck Controller
ADP3167 5-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3168 6-Bit ProgrammablE2 /3/4-Phase Synchronous Buck Controller
ADP3170 VRM 8.5 Compatible Single Phase Core Controller
ADP3171 Synchronous Buck Controller With Dual Linear Regulator Controllers
ADP3178 4-Bit Programmable Synchronous Buck Controller
ADP3179
ADP3180 6-Bit Programmable 2-, 3-, 4-Phase Synchronous Buck Controller
 
0-C     D-L     M-R     S-Z