Details, datasheet, quote on part number: ADP3156JR-15
PartADP3156JR-15
Category
DescriptionDual Power Supply Controller For Desktop Systems
CompanyAnalog Devices
DatasheetDownload ADP3156JR-15 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES Active Voltage Positioning with Gain and Offset Adjustment Optimal Compensation for Superior Load Transient Response Fixed 1.8 V and 2.5 V Output Versions Dual N-Channel Synchronous Driver On-Board Linear Regulator Controller Total Output Accuracy 1% Over Temperature High Efficiency, Current-Mode Operation Short Circuit Protection Overvoltage Protection Crowbar Protects Loads with No Additional External Components Power Good Output SO-16 Package APPLICATIONS Desktop Computer Supplies ACPI-Compliant Power Systems General Purpose DC-DC Converters GENERAL DESCRIPTION

Dual Power Supply Controller for Desktop Systems ADP3156

DELAY NONOVERLAP DRIVE VREF +15% 2R CROWBAR IN OFF CMPI R gm VREF REFERENCE VLDO 1.20V FB OFF-TIME CONTROL VIN SENSE­ R VT1 VREF +5% VREF ­5%

The is a highly efficient synchronous buck switching regulator controller optimized for converting the 5 V main supply into lower supply voltages required on the motherboards of Pentium® III and other high performance processor systems. The ADP3156 uses a current mode, constant off-time architecture to drive two external N-channel MOSFETs at a programmable switching frequency that can be optimized for size and efficiency. It also uses a unique supplemental regulation technique called active voltage positioning to enhance load transient performance. Active voltage positioning results in a DC/DC converter that provides the best possible transient response using the minimum number of output capacitors and smallest footprint. Unlike voltage-mode and standard currentmode architectures, active voltage positioning adjusts the output voltage as a function of the load current so that it is always optimally positioned for a system transient. The ADP3156 provides accurate and reliable short circuit protection and adjustable current limiting. It also includes an integrated overvoltage crowbar function to protect the microprocessor from destruction in case the core supply exceeds the nominal programmed voltage by more than 15%.

The ADP3156 contains a linear regulator controller that is designed to drive an external N-channel MOSFET. This linear regulator is used to generate the auxiliary voltages (AGP, GTL, etc.) required in most motherboard designs, and has been designed to provide a high bandwidth load-transient response. A pair of external feedback resistors sets the linear regulator output voltage.

Pentium is a registered trademark of Intel Corporation. All other trademarks are the property of their respective holders.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: http://www.analog.com Fax: 781/326-8703 © Analog Devices, Inc., 1999

Parameter OUTPUT ACCURACY ADP3156-2.5 V OUTPUT VOLTAGE LINE REGULATION INPUT DC SUPPLY CURRENT2 Normal Mode Shutdown CURRENT SENSE THRESHOLD VOLTAGE CT PIN DISCHARGE CURRENT

ILOAD 10 A (Figure 2) VIN 5.25 V VSD = +25°C, VSD 2.0 V VSENSE­ Forced to VOUT = +25°C VOUT in Regulation VOUT +25°C % Above Output Voltage % Below Output Voltage

OFF-TIME DRIVER OUTPUT TRANSITION TIME POSITIVE POWER GOOD TRIP POINT3 NEGATIVE POWER GOOD TRIP POINT3 POWER GOOD RESPONSE TIME CROWBAR TRIP POINT ERROR AMPLIFIER OUTPUT IMPEDANCE ERROR AMPLIFIER TRANSCONDUCTANCE ERROR AMPLIFIER MINIMUM OUTPUT VOLTAGE ERROR AMPLIFIER MAXIMUM OUTPUT VOLTAGE ERROR AMPLIFIER BANDWIDTH ­3 dB LINEAR REGULATOR FEEDBACK CURRENT LINEAR REGULATOR OUTPUT VOLTAGE SHUTDOWN (SD) PIN Low Threshold High Threshold Input Current

tOFF , tF VPWRGD tPWRGD VCROWBAR ROERR gm(ERR) VCMPMIN VCMPMAX BWERR IFB VO2
VSENSE­ Forced to VOUT + 3% VSENSE­ Forced to VOUT ­ 3% CMP = Open
Figure 2, VLDOIN 1.8 V RPROG 1 A Part Active Part in Shutdown

NOTES 1 All limits at temperature extremes are guaranteed via correlation using standard Statistical Quality Control (SQC) methods. Specifications subject to change without notice. 2 Dynamic supply current is higher due to the gate charge being delivered to the external MOSFETs. 3 The trip point is for the output voltage coming into regulation. Specifications subject to change without notice.

Mnemonic NC AGND SD FB VLDO SENSE­ SENSE+ CT CMP PWRGD VCC DRIVE2 DRIVE1 PGND

Function No Connect. Analog Ground. All internal signals of the ADP3156 are referenced to this ground. Shutdown. A logic high will place the ADP3156 in shutdown and disable both outputs. This pin is internally pulled down. Feedback connection for the linear controller. Connect this pin to the resistor divider network to set the output voltage of the linear regulator. Gate Drive for the linear regulator N-channel MOSFET. Connects to the internal resistor divider that senses the output voltage. This pin is also the reference input for the current comparator. input for the current comparator. The output current is sensed as a voltage at this pin with respect to SENSE­. External Capacitor CT connection to ground sets the off-time of the device. Error Amplifier output and compensation point. The voltage at this output programs the output current control level between the SENSE pins. Power Good. An open drain signal indicates the output voltage is within ± 5% regulation band. Supply Voltage to ADP3156. Gate Drive for the (bottom) Synchronous Rectifier N-channel MOSFET. The voltage at DRIVE2 swings from ground to VCC. Gate Drive for the buck switch N-channel MOSFET. The voltage at DRIVE1 swings from ground to VCC. Power Ground. The drivers turn off the buck and synchronous MOSFETs by discharging their gate capacitances to this pin. PGND should have a low impedance path to the source of the synchronous MOSFET.

Input Supply Voltage (VCC). +16 V Shutdown Input Voltage. +16 V Operating Ambient Temperature Range. to +70°C Junction Temperature Range. to +150°C JA. 90°C/W Storage Temperature Range. to +150°C Lead Temperature (Soldering, 10 sec). +300°C

*This is a stress rating only; operation beyond these limits can cause the device to be permanently damaged.

CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the ADP3156 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.


 

Related products with the same datasheet
ADP3156JR-18
ADP3156JR-25
Some Part number from the same manufacture Analog Devices
ADP3156JR-18 Dual Power Supply Controller For Desktop Systems
ADP3156JR-2.5 Fixed Output Buck Controller
ADP3156JR-25 Dual Power Supply Controller For Desktop Systems
ADP3157 VRM 8.2/3/4 Buck Controller
ADP3158 4-Bit Programmable Synchronous Buck Controller
ADP3159
ADP3160 5-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3161 4-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3162 5-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3163 5-Bit Programmable 2-/3-Phase Synchronous Buck Controller
ADP3164 5-Bit Programmable 4-Phase Synchronous Buck Controller
ADP3166 5-Bit Programmable 2-, 3-, 4-Phase Synchronous Buck Controller
ADP3167 5-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3168 6-Bit ProgrammablE2 /3/4-Phase Synchronous Buck Controller
ADP3170 VRM 8.5 Compatible Single Phase Core Controller
ADP3171 Synchronous Buck Controller With Dual Linear Regulator Controllers
ADP3178 4-Bit Programmable Synchronous Buck Controller
ADP3179
ADP3180 6-Bit Programmable 2-, 3-, 4-Phase Synchronous Buck Controller
ADP3181 5-Bit or 6-Bit Programmable 2-, 3-, 4-Phase Synchronous Buck Controller<<<>>>the ADP3181 is a Highly Efficient Multiphase Synchronous Buck-switching Regulator Controller Optimized For Converting a 12 V Main
ADP3182 Adjustable Output 1-/2-/3-Phase Synchronous Buck Controller<<<>>>the ADP3182 is a Highly Efficient Multi-phase Synchronous Buck Switching Regulator Controller Optimized For Converting a 12 V Main Supply
Same catergory

74LVXZ161284B : 74LVXZ161284B - Low Voltage Ieee 161284 Translating Transceiver With Power-up Protection.

ICX206AL : Diagonal 4.5mm(Type 1/4)CCD Image Sensor For Eiab/w Video Cameras. Diagonal 4.5mm (Type 1/4) CCD Image Sensor for EIA B/W Video Cameras The is an interline CCD solid-state image sensor suitable for EIA B/W video cameras. Compared with the current product ICX086AL, sensitivity and saturation signal are improved drastically through the adoption of Super HAD CCD technology. This chip a field period readout system and an electronic.

M25P16 : 16 Mbit, Low Voltage, Serial Flash Memory With 50 MHZ Spi Bus Interface.

XP0C301 : Composite Transistors. Marking = 4R ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = 50 ;; IC(A) = -0.1 ;; IC(Tr2)(A) = 0.1 ;; PT(W) = 0.15 ;; R1(kW ) = ;; R2(Tr2)(kW ) = ;; Package = SMini5-G1.

155PSB700K2J : Radial Leaded Polypropylene Film Capacitors with Double Sided Metallized Electrodes.

6666AN103J1 : HIGH Voltage Capacitors Monolithic Ceramic TYPE.

CGOV5S3 : 14 PIN DIP 5.0V Stratum 3 OCXO. PARAMETER Storage Temperature Supply Voltage Control Voltage UNITS (Vcc) (Vc) MINIMUM -40 -0.5 NOMINAL MAXIMUM 85 7.0 UNITS °C Vdc TABLE 2.0 MINIMUM NOMINAL MAXIMUM UNITS NOTE TABLE 1.0 NOTE Center Frequency Stability Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Jitter to 20MHz) SSB Phase Noise at 10Hz offset SSB Phase.

GL811E : USB 2.0 to ATA / Atapi Bridge Controller. ALL MATERIALS ARE PROVIDED "AS IS" WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND. NO LICENSE OR RIGHT IS GRANTED UNDER ANY PATENT OR TRADEMARK OF GENESYS LOGIC INC. GENESYS LOGIC HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS IN REGARD TO MATERIALS, INCLUDING ALL WARRANTIES, IMPLIED OR EXPRESS, OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE,.

CY7C145 : 72-mbit (2M x 36/4m x 18/1m x 72) Flow-through SRAM with Nobl˘â Architecture.

DMM-B-44/100 : Fuses 1000VAC/DC .44A F/A DMM Sold Each. s: Manufacturer: Cooper Bussmann ; Product Category: Fuses ; RoHS: No ; Current Rating: 0.44 Amp ; Voltage Rating: 1 KVolts ; Fuse Size / Group: 5AG ; Termination Style: Cartridge ; Fuse Type: Fast Acting ; Body Material: Melamine ; Dimensions: 34.9 mm L x 10 mm D ; Product: Axial Lead and Cartridge Fuses ; Interrupt.

CS3106A-36-54P : Olive Drab Cadmium Plated Free Hanging (In-Line) Circular Connectors, Interconnect Plug, Male Pins; CONN PLUG 39POS STRAIGHT W/PINS. s: Connector Type: Plug, Male Pins ; Shell Size - Insert: 36-54 ; Mounting Type: Free Hanging (In-Line) ; Fastening Type: Threaded ; : - ; Packaging: Bulk ; Number of Positions: 39 ; Termination: Solder ; Shell Material,.

MCT06030C5362FP500 : 53.6K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 53.6K OHM 1/10W 1% SMD 0603. s: Resistance (Ohms): 53.6K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±50ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

ST11KMZQ : SPDT Toggle Switch On-On 6A @ 125VAC; SWITCH TOGGLE MINI UNSELD. s: Circuit: SPDT ; Switch Function: On-On ; Mounting Type: Panel Mount ; Actuator Length: 10.41mm ; Actuator Type: Standard Round ; Bushing Thread: 1/4-40 ; Contact Rating @ Voltage: 6A @ 125VAC ; Illumination: Non-Illuminated ; Termination Style: Solder Lug ; Lead Free Status: Lead Free.

2526-3-01-50-00-00-07-0 : Tin-Lead Swage Terminal - Pc Pin Connectors, Interconnect Slotted; TERM SOLDER SLOT .024"D .115"L. s: Contact Finish: Tin-Lead ; Flange Diameter: 0.094" (2.39mm) ; Length: 0.271" (6.88mm) ; Pin Diameter: 0.061" (1.55mm) ; Type: Slotted ; Hole Diameter: 0.064" (1.63mm) ; Mounting Type: Swage ; Contact Finish Thickness: 300µin (7.62µm).

013973 : 9 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, SOLDER, SOCKET. s: Connector Type: D-Sub ; Gender: Female ; Termination Types: SOLDER ; Number of Contacts: 9.

 
0-C     D-L     M-R     S-Z