Details, datasheet, quote on part number: ADP3161JR
CategoryPower Management => Supervisory Circuits => Regulator Controller
TitleRegulator Controller
Description4-Bit Programmable 2-Phase Synchronous Buck Controller
CompanyAnalog Devices
DatasheetDownload ADP3161JR datasheet
Find where to buy


Features, Applications

FEATURES ADOPTTM Optimal Positioning Technology for Superior Load Transient Response and Fewest Output Capacitors Active Current Balancing Between Both Output Phases VRM 8.4-Compatible Digitally Programmable 2.05 V Output Dual Logic-Level PWM Outputs for Interface to External High-Power Drivers Total Output Accuracy 0.8% Over Temperature Current-Mode Operation Short Circuit Protection Power-Good Output Overvoltage Protection Crowbar Protects Microprocessors with No Additional External Components APPLICATIONS Desktop PC Power Supplies for: Intel Pentium III Processors VRM Modules


The is a highly efficient dual output synchronous buck switching regulator controller optimized for converting 12 V main supply into the core supply voltage required by highperformance processors such as Pentium III. The ADP3161 uses an internal 4-bit DAC to read a voltage identification (VID) code directly from the processor, which is used to set the output voltage between 1.3 V and 2.05 V. The ADP3161 uses a current mode PWM architecture to drive two logic-level outputs at a programmable switching frequency that can be optimized for VRM size and efficiency. The output signals are 180 degrees out of phase, allowing for the construction of two complementary buck switching stages. These two stages share the dc output current to reduce overall output voltage ripple. An active current balancing function ensures that both phases carry equal portions of the total load current, even under large transient loads, to minimize the size of the inductors.

The ADP3161 also uses a unique supplemental regulation technique called active voltage positioning to enhance load transient performance. Active voltage positioning results in a dc/dc converter that meets the stringent output voltage specifications for high-performance processors, with the minimum number of output capacitors and smallest footprint. Unlike voltage-mode and standard current-mode architectures, active voltage positioning adjusts the output voltage as a function of the load current so that it is always optimally positioned for a system transient. The ADP3161 also provides accurate and reliable short circuit protection and adjustable current limiting. The ADP3161 is specified over the commercial temperature range to 70C and is available a 16-lead narrow body SOIC package.

ADOPT is a trademark of Analog Devices Inc. Pentium is a registered trademark of Intel Corporation

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: Fax: 781/326-8703 Analog Devices, Inc., 2001

Parameter FEEDBACK INPUT Accuracy 1.3 V Output 1.6 V Output 2.05 V Output Line Regulation Input Bias Current Crowbar Trip Point Crowbar Reset Point Crowbar Response Time FB Low Comparator Threshold REFERENCE Output Voltage Output Current VID INPUTS Input Low Voltage Input High Voltage Input Current Pull-Up Resistance Internal Pull-Up Voltage OSCILLATOR Maximum Frequency2 Frequency Variation CT Charge Current ERROR AMPLIFIER Output Resistance Transconductance Output Current Maximum Output Voltage Output Disable Threshold 3 dB Bandwidth CURRENT SENSE Threshold Voltage Symbol VFB Conditions


TPC 1 TPC 1 TPC 1 VCC 14 V Percent of Nominal Output Percent of Nominal Output Overvoltage to PWM Going Low


2.0 VFB V FB Forced to VOUT 3% 560 COMP = Open CS+ = VCC, FB Forced to VOUT 0.8 V COMP 1 V VCOMP 3 V CS+ = CS = VCC CS+ (CS) mV to PWM Going Low Percent of Nominal Output Percent of Nominal Output IPWRGD(SINK) A FB Going High FB Going Low IPWM(SINK) 400 A IPWM(SOURCE) 400 A Per Phase, Relative to fCT 69

VCOMP /VCS Input Bias Current Response Time POWER GOOD COMPARATOR Undervoltage Threshold Overvoltage Threshold Output Voltage Low Response Time PWM OUTPUTS Output Voltage Low Output Voltage High Output Current Duty Cycle Limit2

Parameter SUPPLY DC Supply Current Normal Mode UVLO Mode UVLO Threshold Voltage UVLO Hysteresis Symbol Conditions Min Typ Max Unit

NOTES 1 All limits at temperature extremes are guaranteed via correlation using standard Statistical Quality Control (SQC) methods. 2 Guaranteed by design, not tested in production. Specifications subject to change without notice.

VCC. +15 V CS+, CS. V to VCC 0.3 V All Other Inputs and Outputs. +10 V Operating Ambient Temperature Range. to 70C Operating Junction Temperature. 125C Storage Temperature Range. +150C JA Two-Layer Board. 125C/W Four-Layer Board. 81C/W Lead Temperature (Soldering, 10 sec). 300C Vapor Phase (60 sec). 215C Infrared (15 sec). 220C

*This is a stress rating only; operation beyond these limits can cause the device to be permanently damaged. Unless otherwise specified, all voltages are referenced to GND.

Function No Connect. Voltage Identification DAC Inputs. These pins are pulled to an internal reference, providing a Logic 1 if left open. The DAC output programs the FB regulation voltage from 2.05 V. Error Amplifier Output and Compensation Point. The voltage at this output programs the output current control level between CS+ and CS. Feedback Input. Error amplifier input for remote sensing of the output voltage. External capacitor CT connection to ground sets the frequency of the device. Ground. All internal signals of the ADP3161 are referenced to this ground. Open drain output that signals when the output voltage is in the proper operating range. Current Sense Positive Node. Positive input for the current comparator. The output current is sensed as a voltage at this pin with respect to CS. Logic-level output for the phase 2 driver. Logic-level output for the phase 1 driver. Current Sense Negative Node. Negative input for the current comparator. 3.0 V Reference Output. Supply Voltage for the ADP3161.

ORDERING GUIDE Temperature Package Range Description Narrow Body SOIC Package Option R-16A (SO-16)

CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the ADP3161 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.


Related products with the same datasheet
Some Part number from the same manufacture Analog Devices
ADP3162 5-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3163 5-Bit Programmable 2-/3-Phase Synchronous Buck Controller
ADP3164 5-Bit Programmable 4-Phase Synchronous Buck Controller
ADP3166 5-Bit Programmable 2-, 3-, 4-Phase Synchronous Buck Controller
ADP3167 5-Bit Programmable 2-Phase Synchronous Buck Controller
ADP3168 6-Bit ProgrammablE2 /3/4-Phase Synchronous Buck Controller
ADP3170 VRM 8.5 Compatible Single Phase Core Controller
ADP3171 Synchronous Buck Controller With Dual Linear Regulator Controllers
ADP3178 4-Bit Programmable Synchronous Buck Controller
ADP3180 6-Bit Programmable 2-, 3-, 4-Phase Synchronous Buck Controller
ADP3181 5-Bit or 6-Bit Programmable 2-, 3-, 4-Phase Synchronous Buck Controller<<<>>>the ADP3181 is a Highly Efficient Multiphase Synchronous Buck-switching Regulator Controller Optimized For Converting a 12 V Main
ADP3182 Adjustable Output 1-/2-/3-Phase Synchronous Buck Controller<<<>>>the ADP3182 is a Highly Efficient Multi-phase Synchronous Buck Switching Regulator Controller Optimized For Converting a 12 V Main Supply
ADP3186 5-Bit Programmable 2-/3-/4-Phase Synchronous Buck Controller <<<>>>The ADP3186 is a Highly Efficient Multiphase Synchronous Buck Switching Regulator Controller Optimized For Converting a 12 V Main Supply
ADP3188 6-Bit Programmable 2-/3-/4-Phase Synchronous Buck Controller<<<>>>the ADP3188 is a Highly Efficient Multiphase Synchronous Buck Switching Regulator Controller Optimized For Converting a 12 V Main Supply
ADP3203 1 or 2 Phase Imvp-iii Compatible Core Controller For Latest Intel Mobile Processors
ADP3203JRU-085-RL 2-phase Imvp-ii & Imvp-iii Core Controller For Mobile Cpus
ADP3203JRU-1.0-RL 1 or 2 Phase Imvp-iii Compatible Core Controller For Latest Intel Mobile Processors
ADP3203JRU-10-RL 2-phase Imvp-ii & Imvp-iii Core Controller For Mobile Cpus
ADP3204 Multi-phase Imvp-iii Compliant Core Controller For Mobile Intel Cpus
ADP3205 Multi-phase Imvp-iv Core Controller For Mobile Cpus

AD364RJ : Complete 16-Channel, 12-Bit Data Acquisition Systems

ADR03 : Ultra Compact Precision 2.5 V Voltage Reference

AME8500AEETDD26 : 3-Pin/5-Pin Micropower P Reset Family

MUX-24FP : 8-chan/dual 4-chan JFET Analog Multiplexers ( Overvoltage & Power Supply Loss Protected )

AD8021AR-EBZ : Low-noise High-speed Amplifier For 16 Bit Systems

ADG465BRTZ-REEL7 : Tv - Other Composition Circuit Protection - -; IC CHANNEL PROTECTOR SGL SOT23-6 Specifications: Package / Case: SOT-23-6 ; Packaging: Cut Tape (CT) ; Technology: Mixed Technology ; Applications: General Purpose ; Number of Circuits: 1 ; Voltage - Working: - ; Voltage - Clamping: 40V ; Power (Watts): - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ADM6317HARJ32BW-RL : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADM6320PARJ38BX-RL : 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 Specifications: Package Type: SOT23, Other, MO-178AA, SOT-23, 5 PIN ; Operating Temperature: -40 to 85 C (-40 to 185 F)

ADSP-2105KP-55 : 24-BIT, 25 MHz, OTHER DSP, PQCC68 Specifications: Data Bus: 16-Bit ; Supply Voltage: 5V ; Package Type: Other, PLASTIC, LCC-68 ; Pin Count: 68 ; Clock Speed: 25 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; External Memory Interface: 24

ADA4807-2ACPZ-EBZ : Amplifier IC Development Tools Eval Board for 10-Lead LFCSP Analog Devices ADA4807-1 Single-Channel and ADA4807-2 Dual-Channel Operational Amplifiers are low power, low noise, rail-to-rail voltage feedback amplifiers with exceptionally high performance. These op amps are designed to have the lowest input noise (3.1nV/Hz and 0.7pA/Hz) while operating on on

ADUM220N1BRWZ : Digital Isolators IC Robust Dual ISO 2:0 channel Analog Devices ADuM220N/ADuM221N/ADuM225N/ADuM226N Dual-Channel Digital Isolators offer a maximum 13ns propagation delay and less than 3ns pulse width distortion (PWD) at 5V operation. The isolators provide high 100kV/s common-mode transient immunity and tight channel matching at 3.0ns maximum.

0-C     D-L     M-R     S-Z