Details, datasheet, quote on part number: ADP3301AR-32
PartADP3301AR-32
CategoryPower Management => Regulators => Linear Regulators
DescriptionHigh Accuracy Anycap 100 ma Low Dropout Linear Regulator
CompanyAnalog Devices
DatasheetDownload ADP3301AR-32 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

High Accuracy anyCAPTM* 100 mA Low Dropout Linear Regulator ADP3301

FEATURES High Accuracy (Over Line and Load Regulations +25C): 0.8% Ultralow Dropout Voltage: 100 mV Typical 100 mA Requires Only 0.47 F for Stability anyCAPTM* = Stable with All Types of Capacitors Current and Thermal Limiting Low Noise Dropout Detector Low Shutdown Current: 1 A Several Fixed Voltage Options 12 V Supply Range +85 C Ambient Temperature Range Thermally Enhanced SO-8 Package Excellent Line and Load Regulations APPLICATIONS Cellular Telephones Notebook, Palmtop Computers Battery Powered Systems Portable Instruments Post Regulator for Switching Supplies Bar Code Scanners GENERAL DESCRIPTION

The is a member of the ADP330x family of precision low dropout anyCAPTM* voltage regulators. The ADP3301 stands out from the conventional LDOs with a novel architecture, an enhanced process and a new package. Its patented design includes a noninverting wideband driver and a stage that permits the use of an internal "pole splitting" capacitor to stabilize the feedback loop with a single output capacitor as small as 0.47 F. This device is stable with any type of capacitor regardless of its ESR (Equivalent Serial Resistance) value, including ceramic types (MLCC) for space restricted applications. The ADP3301 achieves exceptional accuracy 0.8% at room temperature and 1.4% overall accuracy over temperature, line and load regulations. The dropout voltage of the ADP3301 is only 100 mV (typical) at 100 mA. In addition to the new architecture and process, ADI's new proprietary thermally enhanced package (Thermal Coastline) can handle W of power dissipation without external heat sink or large copper surface on the PC board. This keeps PC board real estate to a minimum and makes the ADP3301 very attractive for use in portable equipment.

The ADP3301 operates with a wide input voltage range from 12 V and delivers a load current in excess of 100 mA. It features an error flag that signals when the device is about to lose regulation or when the short circuit or thermal overload protection is activated. Other features include shutdown and optional noise reduction capabilities. The ADP330x anyCAPTM* LDO family offers a wide range of output voltages and output current levels from to 300 mA: ADP3300 (50 mA, ADP3302 (100 mA, Dual Output) ADP3304 (100 mA, Dual Output with Separate Grounds) ADP3303 (200 mA) ADP3306 (300 mA)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 World Wide Web Site: http://www.analog.com Fax: 617/326-8703 Analog Devices, Inc., 1997

Conditions VIN = Nom VOUT = +25C VIN = Nom VOUT 100 mA VIN = Nom VOUT 0.1 mA VIN 0.1 mA VOUT of VO Nominal mA ON OFF 0 < VSD V @ VIN 12 V VSD = 0, VIN = +25C VSD = 0, VIN +25C @ VIN +85C @ VIN 12 V VEO 5 V ISINK 400 A VIN = Nom VOUT 1 V VIN 10 Hz100 kHz CNR = 0 CNR = 10 nF, 10 F

LINE REGULATION LOAD REGULATION GROUND CURRENT GROUND CURRENT IN DROPOUT VOLTAGE
SHUTDOWN THRESHOLD SHUTDOWN PIN INPUT CURRENT GROUND CURRENT IN SHUTDOWN MODE

OUTPUT CURRENT IN SHUTDOWN MODE ERROR PIN OUTPUT LEAKAGE ERROR PIN OUTPUT "LOW" VOLTAGE PEAK LOAD CURRENT THERMAL REGULATION OUTPUT NOISE 5 V OUTPUT

NOTES 1 Ambient temperature +85 C corresponds to a typical junction temperature +125 C under typical full load test conditions. Specifications subject to change without notice.

Input Supply Voltage. +16 V Shutdown Input Voltage. +16 V Error Flag Output Voltage. +16 V Noise Bypass Pin Voltage. +5 V Power Dissipation. Internally Limited Operating Ambient Temperature Range. to +125C Operating Junction Temperature Range. to +125C JA. 96C/W JC. 55C/W Storage Temperature Range. to +150C Lead Temperature Range (Soldering 10 sec). +300C Vapor Phase (60 sec). +215C Infrared (15 sec). +220C

*This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operation section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Function Output of the Regulator, fixed or 5 volts output voltage. Bypass to ground with F or larger capacitor. Pins 1 and 2 must be connected together for proper operation. Noise Reduction Pin. Used for further reduction of the output noise. (See text for details.) No connection if not used. Ground Pin. Active Low Shutdown Pin. Connect to ground to disable the regulator output. When shutdown is not used, this pin should be connected to the input pin. Open Collector Output which goes low to indicate that the output is about to go out of regulation. Regulator Input. Pins 7 and 8 must be connected together for proper operation.

Contact the factory for the availability of other output voltage options. *SO = Small Outline.

High Accuracy Dual Output Dual Output with Separate Grounds SO-8 High Accuracy SO-8,TSSOP-14 High Accuracy, High Current

NOTES 1 See individual data sheets for detailed ordering information. SO = Small Outline, SOT = Surface Mount, TSSOP = Thin Shrink Small Outline.

CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the ADP3301 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.


 

Related products with the same datasheet
ADP3301AR-33
Some Part number from the same manufacture Analog Devices
ADP3301AR-33 High Accuracy Anycap 100 ma Low Dropout Linear Regulator
ADP3301AR-5 High Accuracy AnyCAP® 100 ma Low Dropout Linear Regulator
ADP3302 High Precision AnyCAP® Dual Low Dropout Linear Regulator
ADP3303 -
ADP3303A High Accuracy AnyCAP® Adjustable 200 ma Low Dropout Linear Regulator
ADP3303AR-2.7 -
ADP3303AR-27 High Accuracy Anycap 200 ma Low Dropout Linear Regulator
ADP3303AR-3 High Accuracy Anycapt Adjustable 200 ma Low Dropout Linear Regulator
ADP3303AR-3.2 -
ADP3303AR-32 High Accuracy Anycap 200 ma Low Dropout Linear Regulator
ADP3303AR-5 High Accuracy Anycapt Adjustable 200 ma Low Dropout Linear Regulator
ADP3304 High Accuracy Anycap 100 ma Low Dropout Linear Regulator
ADP3306
ADP3307 High Accuracy AnyCAP® 100 ma Low Dropout Linear Regulator
ADP3307ART-27 High Accuracy Anycap 100 ma Low Dropout Linear Regulator
ADP3307ART-3 High Accuracy AnyCAP® 100 ma Low Dropout Linear Regulator
ADP3307ART-32 High Accuracy Anycap 100 ma Low Dropout Linear Regulator
ADP3308 AnyCAP® 50 ma Low Dropout Linear Regulator
ADP3308ART-27 Anycap 50 ma Low Dropout Linear Regulator
ADP3308ART-3 AnyCAP® 50 ma Low Dropout Linear Regulator
ADP3308ART-33 Anycap 50 ma Low Dropout Linear Regulator
 
0-C     D-L     M-R     S-Z