Details, datasheet, quote on part number: SW06BRC
PartSW06BRC
CategoryAnalog & Mixed-Signal Processing => Switches & Multiplexers => Analog Switches => SPST
TitleSPST
DescriptionQuad SPST JFET Analog Switch
CompanyAnalog Devices
DatasheetDownload SW06BRC datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES Two Normally Open and Two Normally Closed SPST Switches with Disable Switches Can Be Easily Configured as a Dual SPDT or a DPDT Highly Resistant to Static Discharge Destruction Higher Resistance to Radiation than Analog Switches Designed with MOS Devices Guaranteed RON Matching: 10% max Guaranteed Switching Speeds 500 ns max T OFF 400 ns max Guaranteed Break-Before-Make Switching Low "ON" Resistance: 80 max Low R ON Variation from Analog Input Voltage: 5% Low Total Harmonic Distortion: 0.01% Low Leakage Currents at High Temperature 100 nA max 30 nA max Digital Inputs TTL/CMOS Compatible and Independent of V+ Improved Specifications and Pin Compatible to LF-11333/13333 Dual or Single Power Supply Operation Available in Die Form

The is a four channel single-pole, single-throw analog switch that employs both bipolar and ion-implanted FET devices. The SW06 FET switches use bipolar digital logic inputs which are more resistant to static electricity than CMOS devices. Ruggedness and reliability are inherent in the SW06 design and construction technology. Increased reliability is complemented by excellent electrical specifications. Potential error sources are reduced by minimizing "ON" resistance and controlling leakage currents at high temperatures. The switching FET exhibits minimal RON variation over 20 V analog signal range and with power supply voltage changes. Operation from a single positive power supply voltage is possible. With 0 V, the analog signal range will extend from ground +32 V. PNP logic inputs are TTL and CMOS compatible to allow the SW06 to upgrade existing designs. The logic "0" and logic "1" input currents are at microampere levels reducing loading on CMOS and TTL logic.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 Fax: 617/326-8703

Symbol RON Match VA IA RON IS(OFF) ID(OFF) IS(ON)+ ID(ON) VINH VINL IINH IINL tON tOFF tON­tOFF CS(OFF) CD(OFF) CD(ON)+ CS(ON) ISO(OFF) CT

RON MATCH BETWEEN SWITCHES ANALOG VOLTAGE RANGE

ANALOG CURRENT RANGE RON VS. APPLIED VOLTAGE SOURCE CURRENT IN "OFF" CONDITION DRAIN CURRENT IN "OFF" CONDITION SOURCE CURRENT IN "ON" CONDITION LOGICAL "1" INPUT VOLTAGE LOGICAL "0" INPUT VOLTAGE LOGICAL "1" INPUT CURRENT LOGICAL "0" INPUT TURN-ON TIME

Full Temperature Range2, 4 Full Temperature Range2, 4 VIN 15.0 V5 VIN 0.8 V See Switching Time Test Circuit4, 6 See Switching Time Test Circuit4, 6 Note 0 V

BREAK-BEFORE-MAKE TIME SOURCE CAPACITANCE DRAIN CAPACITANCE CHANNEL "ON" CAPACITANCE

5 V rms, = 7 pF, 5 V rms, = 7 pF, 500 kHz3 All Channels "OFF", DIS = "0"3 All Channels "OFF", DIS = "0"3 All Channels "ON" or "OFF"3


Conditions Operating TA = Max Operating TA = Max Operating TA = Max Operating Temp3, 9 VIN 15.0 V5 VIN 0.8 V See Switching Time Test Circuit4, 8 See Switching Time Test Circuit4, 8 Note 7 All Channels "OFF," DIS = "0"3 All Channels "OFF," DIS = "0"3 All Channels "ON" or "OFF"3

RON MATCH BETWEEN SWITCHES RON Match ANALOG VOLTAGE RANGE VA IA RON

ANALOG CURRENT RANGE RON WITH APPLIED VOLTAGE SOURCE CURRENT IN "OFF" CONDITION DRAIN CURRENT IN "OFF" CONDITION

IS(OFF) ID(OFF) IS(ON)+ ID(ON) IINH IINL tON tOFF tON­tOFF I+
LEAKAGE CURRENT IN "ON" CONDITION LOGICAL "1" INPUT CURRENT LOGICAL "0" INPUT CURRENT TURN-ON TIME

Guaranteed R ON and leakage tests. For normal operation maximum analog signal voltages should be restricted to less than (V+) ­4 V. Switch being tested ON or OFF as indicated, V INH V or VINL 0.8 V, per logic truth table. 4 Also applies to disable pin. 5 Current tested 2.0 V. This is worst case condition. 6 Sample tested. 7 Switch is guaranteed by design to provide break-before-make operation. 8 Guaranteed by design. 9 Parameter tested only = +125°C for military grade device. Specifications subject to change without notice.


 

Related products with the same datasheet
SW06B
SW06BQ
SW06BRC/883
SW06F
SW06FQ
SW06G
SW06GP
SW06GS
SW06N
Some Part number from the same manufacture Analog Devices
SW06BRC/883 Quad SPST JFET Analog Switch
SW201B
SW201G
SW202G
SW7510A
SW7510B
SW7510E
SW7510F
SW7511A
SW7511B
SW7511E
SW7511F
TMP01 Low Power, Programmable Temperature Controller (Temperature Sensor)
TMP01FJ Low Power, Programmable Temperature Controller
TMP01FJ2 Low Power, Programmable Temperature Controller (Temperature Sensor)
TMP01FP Low Power, Programmable Temperature Controller
TMP01GBC Low Power, Programmable Temperature Controller (Temperature Sensor)
TMP03 Serial Digital Output Thermometers (Temperature Sensor)
TMP03FRU Serial Digital Output Thermometers
TMP03GBC
TMP04 Serial Digital Output Thermometers (Temperature Sensor)
 
0-C     D-L     M-R     S-Z