Details, datasheet, quote on part number: AKYLAMD30CameraLink
PartAKYLAMD30CameraLink
CategorySensors => Image Sensors => Cameras (& Camera Modules)
TitleCameras (& Camera Modules)
Description3-CCD Color Linescan Camera, 1k/2k Active Pixels, 10/14 m Pixel Pitch, 30 Mpixels/s Data Rate, Cameralink Interface
CompanyATMEL Corporation
DatasheetDownload AKYLAMD30CameraLink datasheet
  

 

Features, Applications
Features

3-CCD Prismatic Color Linescan Camera High Sensitivity and High SNR Performance Linear CCD Sensors 1024 Pixels: m 2048 Pixels: 10 m Excellent CCD Alignment Accuracy CameraLink Data Format (Base Configuration) Data Rate: or 30 Mpixels/s Dynamic Range: or 10-bit Channel Single Power Supply: to 36 Vdc Easy Camera Control with Programmable Settings Memory for Storing to 60 Configurations High Reliability CE and FCC Compliant

Description

The AKYLA is a rugged, high performance, fully digital, color linescan camera for demanding industrial applications. It includes a high accuracy 3-CCD architecture with a choice of either or 2048 pixel sensors at speeds to 30 million pixels per second per color channel. The AKYLA cameras are optimized for high sensitivity and precise color recognition.

Applications

Web Inspection of Natural Materials Like Food, Wood, Ore, Minerals and Lumber Recycling Quality Control in Printing Processes Texture Recognition

Parameter Sensor Characteristics at Maximum Pixel Rate Two possibilities Resolution Max Line rate in parallel mode Pixel size (square) Antiblooming Radiometric Characteristics Dynamic range Spectral range Non Linearity Typical gain range Typical peak response Red Green Blue Gmin 10 m pitch m pitch Gmax 10 m pitch m pitch 338 260 bit LSB/nJ/cm2 10 Model 20 MHz x 150 Model 30 MHz pixels kHz m Value Unit

Mechanical and Electrical Interface Size x l) Lens mount Sensor alignment Power supply Power dissipation Operating temperature Storage temperature Spectral Response

< 2 max, 0.1 typical DC, single to 35 (non condensing) to 55 (non condensing)
Read the Manual Do Not Drop Camera Keep Foreign Matters Outside the Camera Cleaning

Please read the manual carefully before using the camera for the first time. The camera is a sensitive optical device, handle with care at all times. Do not drop the camera and avoid mechanical shock to the camera. Do not spill liquids on the camera. The camera is not liquid or waterproof. Do not drop metallic objects into the camera. This might cause a short-circuit and damage the camera. Keep the shade cap on the camera head when it is not in use to avoid contaminating the prism. It is recommended that the camera be serviced by Atmel if the front surface of the prism is very dirty because the surface area of the prism cannot be fully accessed from the front. If there are small amounts of contaminants or dust on the prism surface, use a clean lint free cotton swab or other non abrasive medium dipped in acetone or pure alcohol to clean the prism surface. Shake excess solvent off before touching the surface of the prism to avoid streaking. Atmel is not responsible for any scratches or damage inflicted by the customer to the front surface of the prism. To clean the exterior casing of the camera, use a soft, dry cloth. In case of severe stains use a small amount of pure alcohol or isopropyl alcohol. Do not use acetone or other volatile solvents such as benzene or thinners.

Do not open camera. The warranty of the camera expires immediately upon opening. Only authorized service personnel may open the camera. Allow sufficient air circulation around the camera. If this condition is not met, the camera might shut down during operation because it is designed so in order to prevent damage to the optical assemblies since a further temperature increase may damage the camera. Do not store the camera in temperatures over +55C. There is a permanent temperature indicator inside the camera, which is installed to ensure that if the camera is damaged due to over temperature, the warranty of the camera may be void. Do not operate the camera in the vicinity of strong electromagnetic fields (above the requirements of CE conformity). This may cause erroneous operation of the camera. Transport the camera in its original packaging. If the original packaging has been discarded, package the camera with care in a thick layer of soft, preferably anti-static material when transporting. Do not use material that allows the camera to fall to the bottom of the package while transporting. Do not transport with optics attached.


 

Some Part number from the same manufacture ATMEL Corporation
AKYLAMD30LVDS3-CCD 3-CCD Color Linescan Camera, 1k/2k Active Pixels, 10/14 m Pixel Pitch, 30 Mpixels/s Data Rate, Cameralink Interface
AND Gate Array
ARBITER 32-bit Embedded Core Peripheral
ARM7TDMI 16/32-bit Risc Microcontroller Core System
ARM7TDMIBASEDMICRCONTROLLERS System Architecture
ARM7TDMIBUSINTERFACE 32-bit Embedded Core Interface
ARM7TDMITM 16/32-bit Risc Microcontroller Core System
ASF01
AT05SC1604R Low-power, Industry Standard 8-bit Secure Microcontroller With 16K Byte ROM, 4K Byte EePROM, 1K RAM
AT05SC2408R Low-power, High Performance 8-CISC Secure Microcontroller With 24K Byte ROM And 8K Byte EEPROM.
AT05SC3208R Simulator Smart Card Microcontrollers
AT16244F At16244 Fast Logic 16-bit Buffer/line Driver
AT16244F-20XC Fast Logic 16-bit Buffer/line Driver, 6.0V
AT16244F-20YC
AT16244F-25XC At16244 Fast Logic 16-bit Buffer/line Driver
AT16244G
AT16245F At16245 Fast Logic Bi-directional Transceiver
AT16245F-20XC Fast Logic Bi-directional Transceiver, 6.0V
AT16245F-20YC
AT16245F-25XC At16245 Fast Logic Bi-directional Transceiver
AT16245G
Same catergory

A5348CA : Ionization-type Smoke Detector With Interconnect, Timer. The is a low-current, CMOS circuit providing all of the required for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke, all units will sound an alarm. In addition, special are incorporated to facilitate alignment and test of the finished smoke detector. This device.

ELM341 : Low Power Thermostat.

HMR3000 : Digital Compass Module Datasheet. Items included RS 232 Circuit Card Demo Software and Users Manual CD-Rom RS 485 Circuit Card, Users Manual CD Rom Housed Compass Module RS232 Demo Software Disk 1 and 2* Users Manual CD Rom Housed Compass Module RS485 Users Manual CD Rom Housed Compass Module RS232 Demo Software Disk 1 and 2* User's Manual CD Rom Power supply and interface cable Parameter.

ICX232BQ : Diagonal 5mm(Type 1/3.6) Frame Readout CCD Image Sensor With Square Pixel For Color Cameras.

ICX406AQ : Diagonal 8.98mm(Type 1/1.8) Frame Readout CCD Image Sensor With a Square Pixel For Color Cameras.

KF2002-GD45A : Printheads. Compact medium speed thick film thermal printhead (8 dots / mm) Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF2002-GD45A. Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s, the resulting print heads are the fastest in their class. This high-speed.

TC620CCOA : 5v, Dual Trip Point Temperature Sensors. User-Programmable Hysteresis and Temperature Set Point Easily Programs with 2 External Resistors Wide Temperature Detection Range. +125C (TC620/621CVx) External Thermistor for Remote Sensing Applications (TC621x) The TC620 and TC621 are programmable logic output temperature detectors designed for use in thermal management applications. The TC620 an on-board.

TCD1252AP : CCD Linear Image Sensor.

TX253SPD-31 : ti TX253SPD-31, Impactron High Sensitivity CCD (Non-Cooled W/Taped-on-Lid).

GS100502 : Speed Sensors M12-1 ALUM BARREL. » » » Speed Sensors Speed Sensors A position sensor is any device that permits position measurement. It can either be an absolute position sensor or a relative one. Position sensors can be either linear or angular. Positioning Sensors are finding their way into more handheld, medical and industrial.

E32-T61-S : Fiber Optic Sensors Through-beam hi temp Armored. » » » Fiber Optic Sensors Fiber Optic SensorsA photoelectric sensor, or photoeye, is a device used to detect the distance, absence, or presence of an object by using a light transmitter (often infrared) and a photoelectric receiver. They are used extensively in industrial manufacturing.

LM57CISDX-10/NOPB : Board Mount Temperature Sensors Resistor-Programmable Temperature Switch. Texas Instruments LM57 Temperature Switch & Analog Temperature Sensors are a precision, dual-output, temperature switch with integrated analog temperature sensor. The trip temperature (TTRIP) is programmable by using two external 1% resistors. Using extremely small packaged.

AH3775-P-B : Board Mount Hall Effect / Magnetic Sensors Hall Effect Latch Switch. Diodes Inc. AH37x Hall-Effect Sensors are high-voltage, high-sensitivity Hall Effect latch ICs designed for commutation of brushless DC motors, flow meters, linear encoders and position sensors in industrial and consumer home appliances and personal care applications. Their designs.

AH3772-P-B : Board Mount Hall Effect / Magnetic Sensors Hall Effect Latch Switch. Diodes Inc. AH37x Hall-Effect Sensors are high-voltage, high-sensitivity Hall Effect latch ICs designed for commutation of brushless DC motors, flow meters, linear encoders and position sensors in industrial and consumer home appliances and personal care applications. Their designs.

TR1-0030A-001 : Industrial Pressure Sensors Pressure sensor, 30 psia, face seal, analog, Vdd = 4.5 - 5.5V, 2.5%, -40 - 150C. Merit Sensor TR Series Pressure Transducer is a fully compensated, amplified output pressure sensor package that combines Merit Sensor's Sentium process harsh media MEMS piezoresistive die with state-of-the-art pressure sensor ASIC signal management.

 
0-C     D-L     M-R     S-Z