Details, datasheet, quote on part number: AT84AS008GL
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 10 bit
Description10-bit 2.2Gsps ADC
The AT84AS008GL ADC is a high linearity 10-bit 2.2 Gsps version that offers significant improvements in performance while retaining the same functions and I/O interface as the TS83102G0B 10-bit 2 Gsps ADC. The SNR [Signal to Noise Ratio] shows a 10 dB improvement, leading to an ENOB [Effective Number Of bits] of 8 bits at 1.7 Gsps and 7.7 bits at 2.2 Gsps in Nyquist conditions. Furthermore, the FFT response throughout the 1st and 2nd Nyquist zones is now very clean and stable, allowing new possibility for corrections with Look-Up Tables. The improved performance and pin-to-pin compatibility (footprint/functions/electrical I/Os) with the TS83102G0B ADC give designers the ability to rapidly upgrade their existing boards or to design new systems with enhanced performance, without any thermal issue since the AT84AS008GL dissipate 10% less power than the TS83102G0BGL. It comes in the identical 152-pin ceramic CBGA package and is available in Commercial and Indust
CompanyATMEL Corporation
DatasheetDownload AT84AS008GL datasheet
PackagesCBGA 152
Some Part number from the same manufacture ATMEL Corporation
AT84CS001VTP Selectable 10-bit 1:4 or 1:2 ratio 2.2 Gsps DMUX in EBGA package. A monolithic high-speed demultiplexer providing easy interfacing of Atmel high-speed ADCs with standard FPGAs and DSPs. This new demultiplexer
ATR0600 GPS GPS Front-end IC
ATR0610 GPS 2.7-V GPS Low-noise Amplifier
ATR0620 GPS GPS Baseband Processor
ATA5423 ASK/FSK multi-channel half-duplex transceiverThe ATA5423 is a highly integrated UHF ASK/FSK multi-channel half-duplex transceiver with low power consumption supplied in a small 7 x 7 mm QFN48 package.
AT83SND2CMP3 Single-Chip MP3 Decoder with Full Audio InterfaceThe AT83SND2CMP3 has been developped as a versatile remote controlled MP3player for very fast MP3 feature implementation into most existing system.
AT84AS004TP 10-bit 2 Gsps ADCAT84AS004TP is fully-compatible with Atmel's AT84AS003TP 10-bit 1.5 Gsps ADC and DMUX released earlier this year, providing identical form-factor, pin-out and functions. It allows easy
AT73C211 Power management device for digital, analog, interface, and RF and backup The AT73C211 is a power management device for digital, analog, interface, and, insome cases, RF and backup sections of add-on
ATA5823 UHF ASK/FSK multi-channel half-duplex and full-duplex transceiverThe ATA5823/ATA5824 is a highly integrated UHF ASK/FSK multi-channel half-duplex and full-duplex transceiver with low power consumption
ATA5558 R/W-Identification IC The ATA5558 is a contactless, two-terminal R/W-Identification IC (IDIC®) for multi- or single tag applications in the low frequency (≈ 125 kHz) range. The passive tag uses
AT73C239 4-channel Power Management for Wireless ModulesThe AT73C239 is a 4-channel Power Supply Power Management Unit (PMU) availablein a QFN 3 x 3 mm package. It is a fully integrated, low cost, combined
AT78C4050 DVD PRML Channel and System Controller SoCThe AT78C4050 is a high-integration, high performance single chip solution for DVD-ROM, DVD-R/RW, DVD+R/RW, CD-ROM, CD-R/RW and Blue Laser formats. It integrates
ATMOS2M30 2.5M Pixel CMOS Industrial Camera
AT697E Rad-Hard 32 bit SPARC V8 ProcessorThe AT697 is a highly integrated, high-performance 32-bit RISC embedded processorbased on the SPARC V8 architecture. The implementation is based on the EuropeanSpace
AT83C26 Multiple Smart Card Reader Interface With Power ManagementThe AT83C26 is a smart card reader interface IC for smart card reader/writer applicationssuch as EFT/POS terminals and set top boxes. It enables
AT91SAM9261 ARM926EJ-S™- based MicrocontrollerThe AT91SAM9261 is a complete system-on-chip built around the ARM926EJ-S ARMThumb processor with an extended DSP instruction set and Jazelle Java accelerator. Itachieves
AT91SO100 Secure Microcontroller for Electronic Transaction Terminal / ReaderAT91SO100 is a low-power, high-performance, SC100 32-bit microcontroller based on the ARM® enhanced RISC architecture. This newSC100
AT90SC6404RFT Secure Microcontroller for Smart CardsThe AT90SC6404RFT is a low-power, high-performance, 8-/16-bit microcontroller with ROM program memory, EEPROM data memory,based on the secureAVR enhanced RISC
ATR0981 UHF SiGe Front-End ICThe ATR0981 is a monolithic IC manufactured using Atmel's advanced SiGe technology. The IC performs a transmit and receive front-end function, dedicated for a frequency range of 300 MHz to 500 MHz.
ATA6814 BCDMOS Fail-safe System IC Designed for Safety-critical Automotive Applications As an Automotive Failsafe System IC, the ATA6814 is ideal for driver and monitoring functions in ambitious solutions
ATtiny24V 8-bit AVR Microcontroller with 2/4/8K Bytes InSystem Programmable Flash

AT45DB080-RC : 8-megabit 2.7-volt Only Sequential Access Parallel I/o Dataflash

AT49F002NT-50PC : 2-megabit (256kx8) 5v Only CMOS Flash Memory

AT49F512-50JC : 512k (64kx8) 5v Only CMOS Flash Memory

T0816 :

ATTINY45V-10PU : Microcontroller with 2/4/8K Bytes In-System Programmable Flash Features • High Performance, Low Power AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 120 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation • N

AT94K10 : 5K - 40K Gates of At40k FPGA with 8-bit Microcontroller, up to 36K Bytes of SRAM and On-chip JTAG ICE

ATF1502AS-7AX44 : Family Datasheet

ATXMEGA128A3-MHR : 8/16-bit XMEGA A1 Microcontroller The XMEGA™ A1 is a family of low power, high performance and peripheral rich CMOS 8/16-bit microcontrollers based on the AVR® enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the XMEGA A1 achieves throughputs approaching

5962-06B0206QTB : FPGA, BGA349 Specifications: System Gates: 5.50E6 ; Package Type: Other, LGA-349 ; Logic Family: CMOS ; Pins: 349 ; Operating Temperature: -55 to 125 C (-67 to 257 F)

Same catergory

5962R9573201VXC : Radiation Hardened 8-bit Bidirectional CMOS/ttl Level Converter. Radiation Hardened 8-Bit Bidirectional CMOS/TTL Level Converter Devices QML Qualified in Accordance with MIL-PRF-38535 Detailed Electrical and Screening Requirements are Contained in SMD# 5962-9XXXX and Intersil' QM Plan Radiation Hardened EPI-CMOS - Total Dose x 105 RAD(Si) - Latch-Up Immune x 1012 RAD (Si)/s (Note 1) Low Propagation Delay Time - Typical.

AD7537 : (8+4) Loading, Dual 12-Bit CMOS DAC. Two 12-Bit DACs in One Package DAC Ladder Resistance Matching: 0.5% Space Saving Skinny DIP and Surface Mount Packages 4-Quadrant Multiplication Low Gain Error (1 LSB max Over Temperature) Byte Loading Structure Fast Interface Timing APPLICATIONS Automatic Test Equipment Programmable Filters Audio Applications Synchro Applications Process Control The AD7537.

AD9765 : 12-Bit, 125 MSPS Dual TxDAC+®. 12-Bit Dual Transmit DAC 125 MSPS Update Rate Excellent SFDR to Nyquist @ 5 MHz Output: 75 dBc Excellent Gain and Offset Matching: 0.1% Fully Independent or Single Resistor Gain Control Dual Port or Interleaved Data On-Chip 1.2 V Reference Single 3 V Supply Operation Power Dissipation: 5 V Power-Down Mode: V 48-Lead LQFP APPLICATIONS Communications.

ADV7128 : CMOS 80 Mhz, 10-Bit Video DAC. 80 MHz Pipelined Operation 10-Bit D/A Converters RS-343A/RS-170 Compatible Outputs TTL Compatible Inputs +5 V CMOS Monolithic Construction 28-Pin SOIC Package APPLICATIONS High Definition Television (HDTV) High Resolution Color Graphics Digital Radio Modulation CAE/CAD/CAM Applications Image Processing Instrumentation Video Signal Reconstruction Direct.

DAC1020LCN : 10-bit, 12-bit Binary Multiplying D/A Converter. DAC1022 10-Bit Binary Multiplying D A Converter DAC1222 12-Bit Binary Multiplying D A Converter DAC1022 10-Bit Binary Multiplying D A Converter DAC1222 12-Bit Binary Multiplying D A Converter The DAC1020 and the DAC1220 are respectively 10 and 12-bit binary multiplying digital-to-analog converters A deposited thin film R-2R resistor ladder divides the reference.

HI3304JIB : . CMOS Low Power (Typ). 35mW Parallel Conversion Technique Single Power Supply Voltage. to 7.5V Sampling Rate at 5V Supply. 25MHz 4-Bit Latched Three-State Output with Overflow and Data Change Outputs Maximum Nonlinearity. 1/8 LSB Inherent Resistance to Latch-Up Bipolar Input Range with Optional Second Supply Input Bandwidth (Typ). 40MHz Linearity (INL,.

LTC1418 : ->Single Input. LTC1418 5V or +/-5V, 200ksps, 15mW With Serial/parallel I/o.

MAX509 : Quad, Serial, 8-Bit DACs With Rail-to-rail Outputs. Quad, Serial 8-Bit DACs with Rail-to-Rail Outputs The MAX509/MAX510 are quad, serial-input, 8-bit voltage-output digital-to-analog converters (DACs). They operate with a single +5V supply or dual ±5V supplies. Internal, precision buffers swing rail-to-rail. The reference input range includes both supply rails. The MAX509 has four separate reference.

MB40768H : D/A Converter ( 1-ch, 8-bit, 60 MSPS ). The is a low-power and high-speed 8-bit D/A converter. The digital input is TTL compatible and the analog output voltage 5 V. Maximum conversion speed is 60 MHz. The internal reference voltage provided has two types of resistor division scheme and band-gap reference scheme; the external reference voltage may also be used. The MB40768H is suitable for high-definition.

MSC1200Y3PFBR : MicroSystem Mixed-Signal Data Converters. ti MSC1200Y3, 8051 Cpu With 8kB Memory, 24-Bit ADC, Current DAC, And On-chip Oscillator.

MX7645ACPP : CMOS 12-bit Buffered Multiplying DACs.

PCM1792D : 24-Bit 192 KHZ Sampling Advanced Segment Audio Stereo Digital to Analog Convert The PCM1792 is a Monolithic CMOS Integrated Circuit That Includes Stereo Digital-to-analog Converters And Support Circuitry in a Small 28-lead Ssop Package. The Data Converters Use ti S Advanced Segment DAC Architecture to Achieve Excellent Dynamic Performance And Improved.

TDF8704 : TDF8704; 8-bit High-speed Analog-to-digital Converter;; Package: SOT137 (SO24).

TLC0838CDW : ti TLC0838, 8-Bit, 20 KSPS ADC Serial Out, Uprocessor Periph./Standalone, Rem. Op W/Ser. Data Link, Mux Option.

TLC2543 : . TLC2543M 12-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS 12-Bit-Resolution A/D Converter 10-µs Conversion Time Over Operating Temperature 11 Analog Input Channels 3 Built-In Self-Test Modes Inherent Sample-and-Hold Function Linearity Error. ± 1 LSB Max On-Chip System Clock End-of-Conversion Output Unipolar or Bipolar Output.

CS5560 : High-Throughput A/D Converters The CS55xx family of Delta-Sigma-based industrial analog-to-digital converters sets new industry performance standards. This new family of high-precision analog converters combines the higher-bandwidth, low-distortion performance of a SAR converter with high-resolution, low-noise performance that is the hallmark of Delta-Sigma.

ADS1672 : High Speed High Resolution 625kSPS 24 Bit Delta Sigma ADC The ADS1672 is a high-speed, high-precision analog-to-digital converter (ADC). Using an advanced delta-sigma (?) architecture, it operates at speeds up to 625kSPS with outstanding ac performance and dc accuracy. The ADS1672 ADC is comprised of a low-drift, chopper-stabilized modulator with out-of-range.

DAC7718 : Octal Low Power 12-bit +/-15V Output Serial Input Digital-to-Analog Converter The DAC7718 is a low-power, octal, 12-bit digital-to-analog converter (DAC). With a 5V reference, the output can either be a bipolar ±15V voltage when operating from dual ±15.5V (or higher) power supplies, or a unipolar 0V to +30V voltage when operating from a +30.5V (or higher).

LTC2183 : 16-Bit, 80Msps Low Power Dual ADCs The LTC2185/LTC2184/LTC2183 are two-channel simultaneous sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect for demanding communications applications with AC performance that includes 76.8dB SNR and 90dB spurious free dynamic range (SFDR). Ultralow jitter.

0-C     D-L     M-R     S-Z