|
Details, datasheet, quote on part number:S1117-285Q
| |
Datasheet text preview:
Semiconductor
S1117-xxQ
Fixed LDO Voltage Regulator
Descriptions
The S1117 series of positive fixed regulators are designed to provide 1A with higher efficiency than currently available devices. All internal circuitry is designed to operate down to 700mV input to output differential and the dropout voltage is fully specified as a function of load current. Dropout voltage of the device is 100mV at light loads and rising to 700mV at maximum output current. A second low current input is required to achieve this dropout. The S1117 can also be used as a single supply device.
Features
· Output Current of 1A · 1.2V Maximum Dropout voltage at 1A Output Current · 0.04% Line Regulation · 0.1% Load Regulation · 100% Thermal Limit Burn-In · Fast Transient Response
Ordering Information
Type NO. S1117xxQ Marking S1117Q Package Code SOT-223
:Voltage Code (15:1.5V, 18:1.8V, 25:2.5V, 285:2.85V, 33:3.3V, 50:5.0V)
Outline Dimensions
unit : mm
PIN Connections 1. GND 2. Output 3. Input
KSI-2020-005
1
S1117-xxQ
Absolute Maximum Ratings
Characteristic
Operating Input voltage Power Dissipation Lead Temperature (Soldering, 10 sec) Operating Junction Temperature Storage Temperature
Ta=25°C
Symbol
VIN PD TLEAD TOPR TSTG
Ratings
20 0.8 300 -30 ~ 125 -55 ~ 150
Unit
V W °C °C °C
Electrical Characteristics
(TJ = 0 to 125,Cin=10uF, Cout=10uF unless otherwise specified.)
Characteristic
Output Voltage Line Regulation Load Regulation Quiescent Current Dropout Voltage Ripple Rejection Output Noise Voltage Output Current
Symbol
VOUT VOUT VOUT IQ VD RR eN IOUT
Test Condition
VIN = 3.5V, IOUT = 10mA, Tj = 25°C VIN = 2.9V to 11.5V, IOUT = 0 to 1000mA (Vout+1.5V) Vin12V, IOUT=10mA (VIN - Vout)=2V, 10mA IOUT1A VIN= 11.5V, IOUT=0mA IOUT =100mA IOUT =500mA IOUT =1000mA VIN-VOUT=3V, f=120Hz, IOUT=1000mA f=10 to 10KHz, Tj = 25°C VIN-VOUT = 3V, Tj = 25°C
S1117-15Q Min
1.485 1.470 60 1000
Typ
1.5 0.04 0.08 3.6 1.00 1.05 1.10 72 100 1500
Max
1.515 1.530 0.2 0.4 10 1.10 1.15 1.20 -
Unit
V % % mA V dB uV mA
-
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately.
KSI-2020-005
2
S1117-xxQ
Electrical Characteristics
(TJ = 0 to 125, Cin=10uF, Cout=10uF unless otherwise specified.)
Characteristic
Output Voltage Line Regulation Load Regulation Quiescent Current Dropout Voltage Ripple Rejection Output Noise Voltage Output Current
Symbol
VOUT VOUT VOUT IQ VD RR eN IOUT
Test Condition
VIN = 3.8V, IOUT = 10mA, Tj = 25°C VIN = 3.2V to 11.8V, IOUT = 0 to 1000mA (Vout+1.5V) Vin12V, IOUT=10mA (VIN - Vout)=2V, 10mA IOUT1A VIN= 11.8V, IOUT=0mA IOUT =100mA IOUT =500mA IOUT =1000mA VIN-VOUT=3V, f=120Hz, IOUT=1000mA f=10 to 10KHz, Tj = 25°C VIN-VOUT = 3V, Tj = 25°C
S1117-18Q Min
1.782 1.764 60 1000
Typ
1.8 0.04 0.08 4.2 1.00 1.05 1.10 72 100 1500
Max
1.818 1.836 0.2 0.4 10 1.10 1.15 1.20 -
Unit
V % % mA V dB uV mA
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately.
KSI-2020-005
3
|
|
