|
|
Part: 1939STB4600
Category:
Interface and Interconnect
Description: Rs-232 to Sae J1939 Converter
Company: B&B Electronics
Datasheet: Download 1939STB4600 datasheet File size : 257 kB
Request For quote: Find where to buy 1939STB4600
Datasheet text preview:
1939STB4600 pg. 1/1
RS-232 to SAE J1939 Converter
Model 1939STB Description
The 1939STB provides a communication link between a host computer RS-232 port and a SAEJ1939 bus. The 1939STB complies with the SAE-J1939/11 specification and supports the physical layer. Although SAE-J1939 is CAN based, the 1939STB has no support for standard CAN frames (11 bit). The baud rate on the J1939 port is fixed at 250 kbps. The RS-232 side supports baud rates of 9600, 19.2k, 38.4k, 57.6 kbps. Communication between the host PC and the J1939 bus employs control headers for transmission and reception from the SAE-J1939 bus. The control headers break down as follows:
Transmit Header
The transmit header has 4 bytes for control, and 4 to 16 bytes of data arranged as shown in the following table: Byte 1 81 B yte 2 21 Byte 3 Function code // Message number B yte 4 Reserved // # of bytes in message Up to 16 Bytes data ---
Function Codes: 0001 = Move information in data field to the J1939 bus 0010 = Internal commands; (vendor code; set baud rate (RS-232 port)) B y te 0 1 2 3 4 5 6 7 Function Message control byte 1 (internal) Message control byte 2 (internal) Priority (3bits); data page (1bit); PF (4bits) PF cont. (4bits); PS (4bits) PS cont. (4bits); Source Address (4bits) Source Address cont. (4bits ) Message Configuration (internal) Da t a B y te 8 9 10 11 12 13 14 15 Function Data Data Data D ata Da t a Da t a Data Reserved Physical Description Length: 5.3 in (134 mm) Width: 2.8 in (70 mm) Height: 1.0 in (25.4 mm) Serial Connection: DB9 female, DCE SAE-J1939 Connection: Terminal blocks Power Connection: Terminal blocks Temperature: 0 to 70o C Input Power Requirement: 10 to 42 VDC Meets physical layer SAE-J1939/11 Fully compatible with ISO 11898-24v standard
Reception Header
The reception header uses 2 bytes for control and up to 16 bytes of data. Byte 1 42 Byte 2 Message type // Bytes in message Up to 16 bytes of data ---
Message Type: 0000 = data from J1939 bus 0001 = error message (data field contains messages function)
WARNING!
This Model 1939STB Converter Module allows you to connect to active SAE J-1939 networks. It is possible that your transmissions through this converter module could cause malfunction of the network operation, damage to the software or equipment, or bodily harm.
Do Not Transmit Any Messages to The Network without a complete understanding of the operation of the network.
B&B Electronics Mfg. Co. specifically disclaims any responsibility for damage or injury to software, hardware, equipment or persons as a result of using this product.
© B&B Electronics November 2000
This product designed and manufactured in USA of domestic and imported parts by
Others parts begin by 19
19-1 19-2 19-3 19-4
|
|
|
