|
Details, datasheet, quote on part number:9PCDT
| |
Datasheet text preview:
9PCDT4300 pg. 1/1
CE Tap Into Your RS-232 Data Lines CE Model 9PCDT
The 9PCDT will allow an RS-232 port to tap in and check the data being transmitted between two other RS-232 ports. The switches make it simple to choose between monitoring the DCE or DTE port. The 9PCDT also allows the monitoring port to be either DTE or DCE.
The DTE connector is male, and the DCE and TAP connectors are female. All nine lines are run thought from the DCE to the DTE connectors. On the TAP connector RTS (pin 7) is tied to CTS (pin 8) and DSR (pin 6) is tied to CD (pin 1) and DTR (pin 4). Signal ground (pin 5) is tied into the signal ground for the DCE and DTE connectors.
DECLARATION OF CONFORMITY
Manufacturer's Name: Manufacturer's Address: B&B Electronics Manufacturing Company P.O. Box 1040 707 Dayton Road Ottawa, IL 61350 USA Model Numbers: 9PCDT Description: 9-Pin Data Tap Type: Light industrial ITE equipment Application of Council Directive: 89/336/EEC Standards: EN 50082-1 (IEC 801-2, IEC 801-3, IEC 801-4) EN 50081-1 (EN 55022, IEC 1000-4-2) EN 61000 (-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11) ENV 50204 EN 55024
Switch SW 1 SW 2 SW 3 SW 4
Description Monitor RD (pin 2) Monitor TD (pin 3) Tap receives data on pin 2 Tap receives data on pin 3
Michael J. Fahrion, Director of Engineering
! 2000 B&B Electronics Revised November 2000
This product designed and manufactured in USA of domestic and imported parts by
|
|
