|
Details, datasheet, quote on part number:2795M
| |
| Part: | 2795M |
| Category: | Communication => Network => Ethernet/DS1/E1 (T1/E1) => LAN Magnetic |
| Description: | DS3/E3/STS-1 Transformer, High Freq DS3/E3/STS-1 |
| Company: | Bel Fuse Incorporated |
| Datasheet: | Download 2795M datasheet File size : 54 kB |
| Request For quote: | Find where to buy 2795M
|
| |
Datasheet text preview:
HIGH FREQUENCY MAGNETICS
DS3/E3/STS-1 Dual-ratio Surface Mount Transformer
· Miniature transformer supports E3, DS3, SONET STS-1 rates (34.368, 44.736, 51.84 Mb/s) Dual ratios for multiple applications: Turns ratios: 1:1 and 1:2CT Impedance ratios: 1:1 and 1:4 Superior temperature linearity External shield for EMI suppression · · Can handle 15 mA DC Bias · Minimum interwinding breakdown voltage of 1500 Vrms Precision machine winding: 1% tolerance · · · · Operating temperature range: -40° C to +85° C Meets IEC 695, 2-2 flammability requirements PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias
TM00149
· ·
·
ELECTRICAL SPECIFICATIONS at 25° C
DCR (1 - 6) (1-6) :(3-4)1 2795M 1:1 (1-6) : (3-5)2 1 : 2 CT (1 - 6) 42 µH max 0.1 max 0.2 (2-5) max 0.2 (3-4) max 0.2 pF typ 10 Surge Voltage Capability2 Metallic V peak 4000 Longitudinal V peak 2500
Part Number
Turns Ratio ± 1%
Inductance3 µH min
Leakage Inductance4
Interwinding Capacitance
1. with 2 & 3 connected and 4 & 5 connected 2. with 2 and 4 connected 3. measured at 10 kHz, 0.1 Vac 4. measured at 100 kHz, 0.1 Vac
Typical Frequency and Time Response
Terminating Impedances 75 : 75 & 75 : 300
Bandwidth (3 dB) 150 kHz - 350 MHz
Risetime
0.8 ns
SCHEMATICS
2795M
5 6 5 4 6 2 4 1 2 3 1 3
©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00
Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 · Tel 201-432-0463 · Fax 201-432-9542 · www.belfuse.com T1-115
HIGH FREQUENCY MAGNETICS
TM00149
DS3/E3/STS-1 Dual-ratio Surface Mount Transformer
MECHANICAL
2795M
0.240 [6.10] max 6 5 4 A
0.186 [4.72] 0.265 [6.73] ref 0.350 [8.90] max 0.073 [1.85] 0.040 [1.02] 0.065 [1.65]
0.057 [1.45]
A Terminal 1 ID 1 0.020 [0.51] 2 3 0.073 [1.85] 0.364 0.234 [9.25] [5.95] No metallization or solder mask in cross-hatched designated area
0.265 [6.73] max 0.055 [1.40] 0°/8°
0.033 [0.84]
Suggested PCB Pad Layout
Note: Unless otherwise specified, dimensions are nominal and in inches [millimeters].
0.015 [0.40]
R 0.023 [0.60]
Supplementary Information Safety Agency Compatibility Surge Voltage Capability Flammability Compliance Simulation Model Surface-Mount Packaging
Terminal Lead Coplanarity PWB Process Capability
Underwriters Laboratories, Inc. UL 1950 10/700 µs; 10 repetitions of alternating polarity, generator output: peak voltage, 25 source IEC-695, 2-2 (needle flame test), materials are UL 94 VO approved SPICE computer simulation file available on request Tape and Reel; 16 mm wide by 12 mm pitch; 13 inch OD; 4 inch ID 650 transformers per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards--JEDEC SO package 0.004 inch [0.10 mm] Machine placement (recommendation: locate by terminals, not body)
©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00
CORPORATE
Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
FAR EAST
Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com
EUROPE
Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com
T1-116
|
|
