Details, datasheet, quote on part number: 8AG
Part8AG
Category
DescriptionFast Blow Fuse Series
CompanyBel Fuse Incorporated
DatasheetDownload 8AG datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Catalog Number Ampere Rating Typical Volt-drop Melting I2T Melting I2T Maximum Cold < 10 mSec @10 In Power Resistance Dissipation (ohm) (Volt) max. (A2 Sec) (A2 Sec) (W)

Testing current 135% 200% Blow Time Minimum 4 Hrs. N/A Maximum N/A Hr 5 sec

Materials Glass body / Nickel Plated Brass Caps Lead wire: Tin-lead plated Copper, Diameter 0.032" thru' 7A Marking On fuse: "bel", "8AG", "Current Rating","Voltage Rating", and "Appropriate Safety Logos" On label: Above info plus "c" and interrupting rating Voltage on fuse: 250V for 2A; 125V for 2A and above Packaging 1. In bulk: - 1,000 pcs per box; - 500 pcs per box 2. On Axial Tape & Reel: 1,000 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC @ 10mm Pitch and 73mm inside Tape Spacing

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com

CURRENT IN AMPERES NOTE - see important information under "User Guide"on P.08

206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com

8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706

Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366


 

Some Part number from the same manufacture Bel Fuse Incorporated
S555-6400-07 Common MODE Filter Chokes FOR Telecom Applications
V7PC-04C Non-isolated Dc/dc Converters 12V Input / 1.5 - 3.3V Output / 7A
C1Q2.5 Surface Mount Very Fast-acting Chip Fuse
0RLC-10T033 Isolated Dc/dc Converters
5SF800 Quick-acting Fuse Series (Low Breaking Capacity)
MQ125 Quick Acting Micro Fuse
MRT3.15 Time Lag Radial Lead Micro Fuse Series
2795A HIGH Frequency Magnetics Miniature Broadband Surface Mount Transformers
JQ350 Quick Acting Fuse Series
8AGP500 Fast Blow Fuse Series
SSQC5 Replaceable Ssq/sst with Integral Clips
SST3 Square Ceramic Surface Mount Slow Blow Fuse
VRP2-40E1A0 Non-isolated Dc/dc Converters
GSA10 Slow Blow Fuse Series
3ABP1.25 Fast Blow Fuse Series
SSQ10 Square Ceramic Surface Mount Quick Acting Fuse
SI-60001-F Si-60098-f

0402-0010-82 : Standard 1 Tap, Passive

A553-0756-AB : LAN Magnetic Aui ISOlation Transformers, 10Base-T

S553-5999-86 : LAN Magnetic Transformers Only Module, 10Base-T

5TT8 : Slow Blow Fuse Series

V7AH-01K90X : Non-isolated Dc/dc Converters 4.5v-14v Input 0.8v-5.5v/8a Output

5TTP500 : Slow Blow Fuse Series

S560-6611-11 : TELECOM TRANSFORMER Specifications: Category: Signal ; Other Transformer Types / Applications: Telecom ; Mounting: Chip Transformer ; Operating Temperature: -40 to 85 C (-40 to 185 F)

SI-40260 : DATACOM TRANSFORMER FOR GENERAL PURPOSE APPLICATION(S) Specifications: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer

SI-50168-F : DATACOM TRANSFORMER FOR GENERAL PURPOSE APPLICATION(S) Specifications: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer

SRAH-03C250G : 1-OUTPUT 2.7 W DC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, ROHS COMPLIANT PACKAGE-7 ; Output Voltage: 0.9000 to 0.9900 volts ; Input Voltage: 3 to 3.6 volts ; Output Power: 2.7 watts (0.0036 HP) ; Operating Temperature: -40 to 85 C (-40 to 185 F)

VRAH-10J1000 : 1-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, ROHS COMPLIANT, SIP-5 ; Output Voltage: 0.9000 to 1.1 volts ; Input Voltage: 2.25 to 2.75 volts ; Output Power: 10 watts (0.0134 HP) ; Operating Temperature: -40 to 85 C (-40 to 185 F)

Same catergory

M25SP-5 : . M25SP-5 motor's body is the thinnest in models in 25 series. MITSUMI can supply those motors with optimum voltage and current depending on driver (IC) to be used for the machinery and equipment. They are available in a step angle of 7.5. 1. Compact size and high output torque. 2. Superior running quietness and stability. 3. Step angle 7.5. 4. Excellent.

P0102DA1AA3 : Thyristor 0.8a 400v. The P01xxxA/B series of SCRs uses a high performance planar PNPN technology. These parts are intended for general purpose applications where low gate sensitivity is required. ABSOLUTE RATINGS (limiting values) Symbol IT(RMS) IT(AV) ITSM Parameter RMS on-state current (180 conduction angle) Mean on-state current (180 conduction angle) Non repetitive.

SBL82314G : Low Power Bidi Optical Standard Module 1550 NM Emitting, 1310 NM Receiving.

TC9150P : For Infrared Ray Remote Control Receiver.

XZUR55W-4 : Material (Color) = GaAsP/GaP(Red);; Lens = Water Clear;; Peak Wave Length = 627;; Iv(ucd) If@10mA Min.= 4;; Iv(ucd) If@10mA Typ.= 11.

STPR2420 : Ultra-fast Recovery Rectifier Diodes. SUITED FOR SMPS LOW LOSSES LOW FORWARD AND REVERSE RECOVERY TIME HIGH SURGE CURRENT CAPABILITY HIGH AVALANCHE ENERGY CAPABILITY Low cost dual center tap rectifier suited for Switch Mode Power Supply and high frequency to DC converters. Packaged in TO-220AB, this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity.

MCB154230 : 30 mm Replacment LED Bulbs. unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL and is a confidential disclosurelent without consideration other than the borrower's agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically.

64250HLX : Product Information Bulletin Microscope LV Lamps Low Voltage Tungsten Halogen Lamps (microscope).

EP15 : Oscillator. EPOTM Programmable Oscillator 3.3V supply voltage HCMOS/TTL output Plastic surface mount package Stability to 50ppm Available on tape and reel Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Input Current Disable Current (TS Option) Standby Current (PD Option) Frequency Tolerance / Stability Inclusive of all conditions:.

SIHFPC60 : Power Mosfet. VDS (V) RDS(on) Qg (Max.) (nC) Qgs (nC) Qgd (nC) Configuration VGS 29 48 Single Ultra Low Gate Charge Reduced Gate Drive Requirement Enhanced 30 V VGS Rating Reduced Ciss, Coss, Crss Isolated Central Mounting Hole Dynamic dV/dt Rated Repetitive Avalanche Rated Lead (Pb)-free Available This new series of low charge Power MOSFETs achieve significantly.

AD8317_08 : 1 MHz to 10 GHz, 55 dB Log Detector/controller. Wide bandwidth: 1 MHz to 10 GHz High accuracy: 1.0 dB over temperature 55 dB dynamic range to 8 GHz 3 dB error Stability over temperature: 0.5 dB Low noise measurement/controller output, VOUT Pulse response time: ns/10 ns (fall/rise) Small footprint, 3 mm LFCSP Supply operation: 22 mA Fabricated using high speed SiGe process APPLICATIONS RF transmitter.

HMC934LP5E : Analog Phase Shifter SMT, 1 - 2 GHz. The HMC934LP5E is an Analog Phase Shifter which is controlled via an analog control voltage from 0 to +13V. The HMC934LP5E provides a continuously variable phase shift of 0 to 400 degrees from 1 to 2 GHz, with extremely consistent low insertion loss versus phase shift and frequency. The high accuracy HMC934LP5E is monotonic.

CGS431T300R2C : 430F Aluminum Capacitor Radial, Can - Screw Terminals 300V; CAP ALUM 430UF 300V SCREW. s: Capacitance: 430F ; ESR (Equivalent Series Resistance): 228.0 mOhm ; : General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 85C ; Size / Dimension: 1.375" Dia (34.93mm) ; Lead Spacing: - ; Surface Mount Land Size: - ; Mounting Type: Chassis Mount ; Package / Case:.

2228-1X10FT : TAPE, INSULATION, PP, BLACK, X10FT. s: Tape Type: Electrical Insulation ; Tape Backing Material: PP (Polypropylene) ; Tape Width - Metric: - ; Tape Width - Imperial: - ; Tape Length - Metric: 3.048m ; Tape Length - Imperial: 10ft ; Tape Color: Black.

A22-FR-10M : Pushbutton Switches SPST-NO MOM RND RED Flush actuator. » » » » Switches for AC Induction Motors Switches for AC Induction MotorsMost motors are AC induction motors. In fact, more than 80% of all motors are AC induction motors. An AC induction motor can be single phase, poly-phase, brushed, or brushless. Unlike DC motors, they.

55510-320LF : Gold Surface Mount Rectangular - Headers, Receptacles, Female Socket Connectors, Interconnect Receptacle; 320-LPVCC 4.5 T.E SMT ASSY. s: Color: Black ; Connector Type: Receptacle ; Contact Finish: Gold ; : - ; Mounting Type: Surface Mount ; Number of Positions Loaded: All ; Number of Rows: 2 ; Pitch: 0.079" (2.00mm) ; Row Spacing: 0.079" (2.00mm) ; Packaging:.

B41888C4228M003 : CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 16 V, 2200 uF, THROUGH HOLE MOUNT. s: RoHS Compliant: Yes ; : Polarized ; Capacitance Range: 2200 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 16 volts ; Leakage Current: 352 microamps ; ESR: 30 milliohms ; Mounting Style: Through Hole ; Operating Temperature: -55 to 105 C (-67 to 221 F).

DHC-8164-100U : 2 ELEMENT, 10 uH, GENERAL PURPOSE INDUCTOR, SMD. s: Mounting Option: Surface Mount Technology ; Devices in Package: 2 ; Lead Style: WRAPAROUND ; Application: General Purpose, Power Choke ; Inductance Range: 10 microH ; Inductance Tolerance: 20 (+/- %) ; DCR: 0.0081 ohms ; Rated DC Current: 14200 milliamps ; Testing Frequency: 100 kHz ; Operating.

LV47002P : 48 W, 4 CHANNEL, AUDIO AMPLIFIER, ZIP25. s: Bandwidth: 0.0200 MHz ; Supply Voltage (VS): 9 to 16 volts ; Output Power: 48 watts (0.0643 HP) ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: HZIP-25 ; Number of Devices: 1 to 4.

S1075216 : SHIELDED, VARIABLE INDUCTOR. s: Devices in Package: 1 ; Lead Style: WIRE ; Standards and Certifications: RoHS ; Molded / Shielded: Shielded ; Configuration: Variable ; Application: RF Choke ; Inductance Range: 17 microH.

 
0-C     D-L     M-R     S-Z