|Category||Analog & Mixed-Signal Processing => Amplifiers|
|Description||L, S-Band SPDT Switch
The μPG2151T5K is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for mobile phone and another L, S-band application.
This device can operate 2 control switching by control voltage 1.8 to 5.3 V. This device can operate frequency from 0.05 to 3.0 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) package. And this package is able to high-density surface mounting.
|Datasheet||Download UPG2151T5K datasheet
The is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for mobile phone and another L, S-band application. This device can operate 2 control switching by control voltage 5.3 V. This device can operate frequency from to 3.0 GHz, having the low insertion loss and high isolation. This device is housed a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) package. And this package is able to high-density surface mounting.FEATURES
Switch control voltage : Vcont (H) (3.0 V TYP.) : Vcont (L) (0 V TYP.) Low insertion loss 0.30 dB TYP. to 1.0 GHz, Vcont (H) 3.0 V, Vcont (L) 0.35 dB TYP. to 2.0 GHz, Vcont (H) 3.0 V, Vcont (L) 0.40 dB TYP. to 2.5 GHz, Vcont (H) 3.0 V, Vcont (L) 0.50 dB TYP. to 3.0 GHz, Vcont (H) 3.0 V, Vcont (L) 0 V High isolation 25 dB TYP. to 1.0 GHz, Vcont (H) 3.0 V, Vcont (L) 18 dB TYP. to 2.0 GHz, Vcont (H) 3.0 V, Vcont (L) 17 dB TYP. to 2.5 GHz, Vcont (H) 3.0 V, Vcont (L) 13 dB TYP. to 3.0 GHz, Vcont (H) 3.0 V, Vcont (L) 0 V Handling power : Pin (0.1 dB) = +21.0 dBm TYP. = 2.0/2.5 GHz, Vcont (H) 2.6 V, Vcont (L) Pin (0.1 dB) = +23.0 dBm TYP. = 2.0/2.5 GHz, Vcont (H) 3.0 V, Vcont (L) 0 V High-density surface mounting : 6-pin plastic TSSON package mm)APPLICATIONS
L, S-band digital cellular or cordless telephone TM W-LAN, WLL and Bluetooth etc.
Part Number Order Number Package 6-pin plastic TSSON (Pb-Free)
Supplying Form Embossed tape 8 mm wide Pin 1, 6 face the perforation side of the tape Qty 5 kpcs/reel
Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: µPG2151T5K
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.Document No. PG10574EJ01V0DS (1st edition) Date Published October 2005 CP(K)
ABSOLUTE MAXIMUM RATINGS (TA = +25°C, unless otherwise specified)
Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature
RECOMMENDED OPERATING RANGE (TA = +25°C, unless otherwise specified)
Symbol Vcont (H) Vcont (L) MIN. 1.8 -0.2 TYP. 3.0 0 MAX. 5.3 +0.2 Unit V
Switch Control Voltage (H) Switch Control Voltage (L)
ELECTRICAL CHARACTERISTICS (TA = +25°C, Vcont (H) 3.0 V, Vcont (L) V, DC cut capacitors = 56 pF, unless otherwise specified)
Parameter Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Insertion Loss 4 Isolation 1 Isolation 2 Isolation 3 Isolation 4 Input Return Loss Output Return Loss 0.1 dB Loss Compression Input Power
Test Conditions to 1.0 GHz to 2.0 GHz to 2.5 GHz to 3.0 GHz to 1.0 GHz to 2.0 GHz to 2.5 GHz to 3.0 GHz to 3.0 GHz to 3.0 GHz = 2.0/2.5 GHz Vcont (H) 2.6 V, Vcont (L) 2.0/2.5 GHz Vcont (H) 3.0 V, Vcont (L) 0 V2nd Harmonics 3rd Harmonics Switch Control Current Switch Control Speed
Notes 1. DC cut capacitors to 0.5 GHz 2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range. Caution This device is used it is necessary to use DC cut capacitors. The value of DC cut capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. The range of recommended DC cut capacitor value is less than 100 pF.
|Related products with the same datasheet|
|Some Part number from the same manufacture Celeritek|
|μPG2151T5K-E2 L, S-Band SPDT SwitchThe μPG2151T5K is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for mobile phone and another L, S-band application.This device can operate|
|UPG2155TB NEC's L-Band 4 W High Power SPDT SwitchThe μPG2155TB is an L-band SPDT GaAs FET switch developed for digital cellular or cordless telephone applications. The device can operate from 500 MHz to 2.5 GHz,|
|UPD5713TK Wide Band SPDT Switch The uPD5713TK is a CMOS MMIC for wide-band SPDT Single Pole Double Throw which were designed for mobilecommunications, wireless communications and another general-purpose RF switching|
|UPG2301TQ NEC's Power Amplifier For Bluetooth Class for Bluetooth Class 1.This device realizes high efficiency, high gain and high output power by using InGaP HBT. This device is housed in a low profile 10-pin|
|UPG2311T5F GaAs MMIC Low Noise Amplifier For GPSThe μPG2311T5F is a GaAs MMIC LNA for Car Navigation Systems and Handy GPS. This IC consists of two stage amplifiers and has high gain performance.|
|UPG2022T5G NEC's 4.8 to 5.85 GHz High Power GaAs MMIC SPDT SwitchNEC's UPG2022T5G is a high power GaAs MMIC SPDT (Single Pole Double Throw) switch. This device can operate from 4.8 to 5.85 GHz with low insertion|
|UPG2022TB NEC's 4.8 to 5.85 GHz High Power GaAs MMIC SPDT SwitchNEC's UPG2022TB is a high power GaAs MMIC SPDT (Single Pole Double Throw) switch. This device can operate from 4.8 to 5.85 GHz with low insertion|
|UPG2158T5K L, S-Band SPDT Switch|
|UPG2163T5N GaAs MMIC SPDT Switch For 2.4 GHz and 5 GHz Dualband Wireless LAN|
|UPG2227T5F NEC's L-Band SP3T Switch|
|MC-7831-HA NEC's 1 GHz GaAs CATV 18 dB Push-Pull AmplifierNEC's MC-7831-HA is a GaAs Multi-Chip Module designedfor use as input stages in CATV applications up to 1 GHz. Becausethis unit is a GaAs device, it has low distortion,|
|MC7834KC NEC's 870 MHz GaAs CATV 20 dB Push-Pull Amplifier (Higher Current Version For Higher Distortion Performance)NEC's MC-7834-KC is a GaAs Multi-Chip Module designed for use as input stages in CATV applications|
|MC7847KC NEC's 870 MHz GaAs CATV 25 dB Power Doubler Amplifier(Higher Current Version For Higher Distortion Performance) NEC's MC-7847-KC is a GaAs Multi-Chip Modules designed for use as output stages in CATV|
|MC7894 1 GHz CATV 25 dB Power Doubler Amplifier - NCSD Preliminary VersionThe MC-7894 is a GaAs Multi-chip Module designed for use in CATV applications up to 1 GHz. This unit has lowdistortion, low noise|
|MC7893 1 GHz CATV 23 dB POWER DOUBLER AMPLIFIERThe MC-7893 is a GaAs Multi-chip Module designed for use in CATV applications up to 1 GHz. This unit has lowdistortion, low noise figure and return loss across|
|PS2501A NEC's High Isolation Voltage Single Transistor Type Multi Photocoupler Series|
|PS2513-1 High-SpeedSwitching/High Isolation Voltage Photocoupler Series|
|PS2581AL1 Long Creepage High Isolation Voltage 4-PIN Photocoupler|
|PS2701A-1 NEC's High Isolation Voltage SOP Photocoupler|
|PS2711-1 High CTR, 4-PIN SOP Photocoupler|
|PS2801A-1 NEC's High Isolation Voltage SSOP Photocoupler|
CFK2062-P1 : Discrete GAAS Fets, 800-900 MHZ
CMM6004-SC : High Dynamic Range Amplifier, 0.25-3.0 GHZ
NE3503M04 : HIGH-GAIN AMPLIFIER N-CHANNEL HJ-FET SUPER LOW NOISE FIGURE AND HIGH ASSOCIATED GAIN: NF = 0.55 dB TYP., Ga = 11.5 dB TYP. @ VDS = 2 V, ID = 10 mA, f = 12 GHz
UPC3223TB : 5V, Silicon MMIC Medium Output Power Amplifier The μPC3223TB is a silicon monolithic IC designed as IF amplifier for DBS tuners. This IC is manufactured using our 30 GHz fmax UHS0 (Ultra High Speed Process) silicon bipolar process.
PS2501A : NEC's High Isolation Voltage Single Transistor Type Multi Photocoupler Series
PS9213 : 1 Mbps, Open Collector Output High CMR, Intelligent Power Module, 5-PIN SOP Photocoupler For Creepage Distance of 5.5 mm
PS7200E-1A-E4 : 4 PIN SOP, 0.8 ohms Low On-State Resistance 1-CH Optical Coupled MOSFET The PS7200E-1A is a low on-state resistance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side. It is suitable for high-frequency signal control due to its low C × R
PS7200R-1A : Single Channel, Low C x R (16.8 pF x ohm), Low Ron (2.4 ohnm) 4-PIN Ultra Small Flat-Lead The PS7200R-1A is a low output capacitance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side. It is suitable for high-frequency signal control, du
PS7200U-1A : NEC's 4-PIN SOP Low Off-State Leakage Current, 1-CH Optical Coupled MOS FET NEC's PS7200U-1A is a low output capacitance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side.
PS7200U-1A-E4 : NEC's 4-PIN SOP Low Off-State Leakage Current, 1-CH Optical Coupled MOS FET NEC's PS7200U-1A is a low output capacitance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side.
PS7801E-1A-F3 : 4-Pin Ultra Small Flat-Lead, Low C x R, 1-ch Optical The PS7801E-1A is a low output capacitance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side.
AD708 : Dual. Ultralow Offset Voltage Dual op Amp. Very High DC Precision 30 V max Offset Voltage 0.3 V/C max Offset Voltage Drift 0.35 V p-p max Voltage Noise to 10 Hz) 5 Million V/V min Open Loop Gain 130 dB min CMRR 120 dB min PSRR Matching Characteristics 30 V max Offset Voltage Match 0.3 V/C max Offset Voltage Drift Match 130 dB min CMRR Match Single Version: AD707 Available in 8-Pin Plastic Mini-DIP,.
CHV2240 : Multifunction : K-band Vco And Q-band Multiplier. The is a monolithic multifunction proposed for frequency generation 38GHz. It integrates a K-band Voltage Controlled Oscillator, a Q-band frequency multiplier and buffer amplifiers. For performance optimisation, an external port (ERC) allows a passive resonator coupling to the oscillator (at half output frequency). This chip has been especially designed.
LTC1164 : LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter. LTC1164 Low Power, Low Noise, Quad Universal Filter Building Block Low Power 4 Filters a 0.3" Wide Package 1/2 the Noise of the 60, 61 Devices Wide Output Swing Clock-to-Center Frequency Ratios of 50:1 and 100:1 Operates from to ±8V Power Supplies Customized Version with Internal Resistors Available Ratio of 50:1 and 100:1 Simultaneously Available Antialiasing.
MAX4051 : Low-Voltage, CMOS Analog Multiplexers/switches. The MAX4051/MAX4052/MAX4053 and MAX4051A/ MAX4052A/MAX4053A are low-voltage, CMOS analog ICs configured an 8-channel multiplexer (MAX4051/A), two 4-channel multiplexers (MAX4052/A), and three single-pole/double-throw (SPDT) switches (MAX4053/A). The A-suffix parts are fully characterized for on-resistance match, on-resistance flatness, and low leakage.
MSC2313258D-XXDS2 : 1,048,576-word X 32-bit Dynamic RAM Module : Fast Page Mode Type With Edo.
OP-07CSB : Precision Operational Amplifier.
RF2617 : 3V Cdma/fm Receive Agc Amplifier. Typical Applications 3V CDMA/FM Cellular Systems Supports Dual-Mode AMPS/CDMA Supports Dual-Mode TACS/CDMA Product The is a complete AGC amplifier designed for the receive section of 3V dual-mode CDMA/FM cellular applications. It is designed to amplify IF signals while providing more than 90dB of gain control range. Noise Figure, IP3, and other s are designed.
SAA7157 : SAA7157; Clock Signal Generator Circuit For Digital TV Systems (SCGC).
SN55113FK : Dual Differential Line Drivers. Choice of Open-Collector, Open-Emitter, or 3-State Outputs High-Impedance Output State for Party-Line Applications Single-Ended or Differential AND/NAND Outputs Single 5-V Supply Dual Channel Operation Compatible With TTL Short-Circuit Protection High-Current Outputs Common and Individual Output Controls Clamp Diodes at Inputs and Outputs Easily Adaptable.
TC75W51FU : CMOS Linear Integrated Circuit, Silicon Monolithic- Dual op Amp.
THS4042 : Single. 165-mhz C-stable High-speed Amplifiers. C-Stable Amplifiers Drive Any Capacitive Load High Speed 165 MHz Bandwidth (3 dB); 100 MHz Bandwidth (3 dB); 35 MHz Bandwidth (3 dB); 400 V/µs Slew Rate Unity Gain Stable High Output Drive, 100 mA (typ) Very Low Distortion THD = 75 dBc = 1 MHz, RL THD = 89 dBc = 1 MHz, 1 k) Wide Range of Power Supplies VCC ±15 V Available in Standard.
TLV2625 : . TLV2625, TLV262xA FAMILY OF LOW-POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH SHUTDOWN CMOS Rail-To-Rail Output VICR Includes Positive Rail Wide Bandwidth. 11 MHz Slew Rate. 10 V/µs Supply Current. 800 µA/Channel Input Noise Voltage. 27 nV/Hz Ultralow Power Down Mode IDD(SHDN) = 4 µA/Channel Supply Voltage Range. 5.5 V Specified Temperature.
X9409 : Quad 64 Tap Xdcp, Low Power Two-wire Interface, Single Supply. Four potentiometers per package 64 resistor taps 2-wire serial interface for write, read, and transfer operations of the potentiometer 50 Wiper resistance, typical at 5V. Four non-volatile data registers for each potentiometer Non-volatile storage of multiple wiper position Power on recall. Loads saved wiper position on power up. Standby current <.
LT1994 : Low Noise, Low Distortion Fully Differential Input/Output Amplifier/Driver The LT®1994 is a high precision, very low noise, low distortion, fully differential input/output amplifier optimized for 3V, single supply operation. The LT1994's output common mode voltage is independent of the input common mode voltage, and is adjustable by applying a voltage.
ADA4000-2 : Dual, Low Cost, Precision JFET Input Operational Amplifier The ADA4000-1/ADA4000-2/ADA4000-4 are JFET input operational amplifiers featuring precision, very low bias current, and low power. Combining high input impedance, low input bias current, wide bandwidth, fast slew rate, and fast settling time, the ADA4000-1/ADA4000-2/ADA4000-4 are ideal amplifiers.
ADA4937-2 : Dual Ultralow Distortion, Differential ADC Driver The ADA4937 is a low noise, ultralow distortion, high speed differential amplifier. It is an ideal choice for driving high performance ADCs with resolutions up to 16 bits from dc to 100 MHz. The adjustable level of the output common mode allows the ADA4937 to match the input of the ADC. The internal.
PI3A268C : Dual SPDT With 0.6-Ohm Ron And -1.5V Support Dual SPDT with 0.6-Ohm Ron and -1.5V Support.
TPL8002-25 : TANDEM 64-TAP Digital Potentiometer The TPL8002-25 is a programmable resistor device implementing two digital potentiometers with 64 wiper positions each that are tandem controlled through a 6-bit parallel interface. The device has fixed wiper resistances at the respective wiper contacts that tap the potentiometer resistors at a point determined by the binary.