Details, datasheet, quote on part number: A14J
DescriptionProcess Sealed Subminiature Toggles
CompanyNihon Kaiheiki Industry
DatasheetDownload A14J datasheet
Find where to buy


Features, Applications

Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement contents.) Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Toggle option in antistatic material available for dissipating electrostatic discharges. Matching indicators available and shown at the end of Section M.

Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range ~ 28V) Note: Find additional explanation of operating range in Supplement section.

Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
Electrical Life: Nominal Operating Force: Contact Timing: Angle of Throw:

50 milliohms maximum 500 megohms minimum 500V AC minimum between contacts for 1 minute minimum; 500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 50,000 operations minimum 1.47N (momentary); 1.18N (maintained) for.394" (10.0mm) toggles 2.73N (momentary); 1.84N (maintained) for all other toggles Nonshorting (break-before-make) 26

Toggle: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals:

Glass fiber reinforced polyamide for antistatic; nickel plated brass for all others Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating

Operating Temperature Range: Humidity: Vibration: Shock:

30C through +85C (22F through ~ 95% humidity for 240 hours ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning Specifications in Supplement section.

UL Recognition or CSA Certification: The A Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

H V Straight with Bracket Straight with Inline Bracket (Single Pole only) Right Angle with Bracket Vertical with Bracket Vertical with Inline Bracket (Single Pole only) Straight Long

Short Paddle for K Toggle Long Paddle for K Toggle

A B DESCRIPTION FOR TYPICAL ORDERING EXAMPLE ------.248" (6.3mm) Long Bat Toggle SPDT ON-NONE-ON Circuit --Vertical PC Terminals Black White Red Yellow Green Blue Gray


Some Part number from the same manufacture Nihon Kaiheiki Industry
A26K Process Sealed Subminiature Toggles
MS22BSA Miniature Slides
AS21AB Subminiature Slides
B1SEP Process Sealed Subminiature Antistatic Toggles
A27KV1 Process Sealed Subminiature Rockers
P2013P Internationally Approved Toggles
A24J Process Sealed Subminiature Toggles
AS12CH Subminiature Slides
A2SKP Process Sealed Subminiature Rockers
AB11AB-FA Process Sealed Subminiature Pushbuttons
JF01PF Ultra-miniature Fully Illuminated Toggles
YB25MKW01 Short Body Pushbuttons
M2112JFG LED Tipped Actuators
B2RKW Process Sealed Subminiature Antistatic Toggles
WR15AL Environmentally Sealed Rockers
A1RJ Process Sealed Subminiature Toggles
B13LW Process Sealed Subminiature Antistatic Toggles
Same catergory

3LP02M : . s Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Conditions Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage.

AN926 : . To insure traceability to specific assembly and test operations, ST clearly brands a date code on every device, and also an encapsulation code on CaphatTM products. The 9-character date code (Figure 1) is positioned at the top of the label, beside the ST logo. This presents a complete facility identification, as well as a final-test time-line of the device's.

KM616FS2000 : = KM616FS2000 128K X16 Bit Super Low Power And Low Voltage Full CMOS Static RAM ;; Organization = 128Kx16 ;; Vcc(V) = 2.3~3.3 ;; Speed-tAA(ns) = 85,120,150 ;; Operating Temperature = C,i ;; Operating Current(mA) = 50 ;; Standby Current(uA) = 10 ;; Package = 44TSOP2 ;; Production Status = Eol ;; Comments = -.

MAX1799EVSYS : MAX1799EVSYS Evaluation System For The MAX1799. The MAX1799 evaluation system (EV system) consists a MAX1799 evaluation kit (EV kit) and a companion Maxim system management bus (SMBusTM) interface board. The MAX1799 EV kit is an assembled and tested PC board that demonstrates the MAX1799 system power supply. The IC contains five programmable LDO linear regulators and two undedicated open-drain outputs.

AP601 : The AP60x product series has been developed to meet the requirements of the next-generation communication infrastructure systems. The products are targeted at the pre-driver and driver stage in wireless infrastructure equipment such as cellular basestations, PA boards and repeaters. These products are designed to meet the requirements for high linearity.

XC8C-0951L-AW : XC9.

PTL-17-428 : TLS PC Link Printable Labels. s: Accessory Type: Label ; For Use With: Brady TLS2200 & TLS-PC Link Thermal Transfer Portable Printers ; Marker Type: Thermal Transfer ; Legend: Blank (No Legend) ; Marker Color: - ; Legend Color: - ; Marker Material: Polyester.

BN224K0474K-- : 0.47F Film Capacitor Radial; CAP FILM 0.47UF 630VDC RADIAL. s: Capacitance: 0.47F ; Tolerance: 10% ; Dielectric Material: Polyester, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.886" (22.50mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; : AC and Pulse ; Lead Free Status: Contains Lead ; RoHS.

1210-102K : Fixed Inductors, Coils, Choke 1H 515mA 1210 (3225 Metric) Ferrite Core; COIL 1.0UH FERRITE SMD. s: Inductance: 1H ; Tolerance: 10% ; Package / Case: 1210 (3225 Metric) ; Packaging: Tape & Reel (TR) ; Type: Ferrite Core ; Current: 515mA ; Mounting Type: Surface Mount ; Q @ Freq: 30 @ 7.9MHz ; Frequency - Self Resonant: 120MHz ; DC Resistance (DCR):.

HSM24DRAH : Gold Through Hole, Right Angle Card Edge, Edgeboard Connector Connectors, Interconnect Non Specified - Dual Edge; CONN EDGECARD 48POS R/A .156 SLD. s: Card Thickness: 0.062" (1.57mm) ; Card Type: Non Specified - Dual Edge ; Contact Finish: Gold ; Mounting Type: Through Hole, Right Angle ; : - ; Number of Positions: 48 ; Number of Rows: 2 ; Pitch: 0.156".

D38999/26JA98PAL : Composite, Olive Drab Cadmium Plated Free Hanging (In-Line) Circular - Housing Connectors, Interconnect Plug for Male Contacts; CONN HSG PLUG 3POS STRAIGHT PINS. s: : Shielded ; Packaging: Bulk ; Connector Type: Plug for Male Contacts ; Mounting Type: Free Hanging (In-Line) ; Shell Size - Insert: 9-98 ; Contact Type: Crimp ; Fastening Type: Threaded.

1375583-9 : Gold Surface Mount Rectangular - Headers, Male Pin Connectors, Interconnect Header, Shrouded; CONN HEADER 10POS IDC SMD 30GOLD. s: Color: Black ; Connector Type: Header, Shrouded ; Contact Finish: Gold ; Contact Mating Length: 0.230" (5.84mm) ; : Board Lock ; Mounting Type: Surface Mount ; Number of Positions Loaded: All ; Number of Rows: 1 ; Pitch:.

XG4E-1632 : Gold Free Hanging (In-Line) Rectangular - Free Hanging, Panel Mount Connectors, Interconnect Plug; CONN PLUG 16POS FLAT CABLE IDC. s: Color: Black ; Connector Type: Plug ; Contact Finish: Gold ; : Feed Through ; Mounting Type: Free Hanging (In-Line) ; Number of Rows: 2 ; Pitch: 0.100" (2.54mm) ; Row Spacing: 0.100" (2.54mm) ; Packaging: Bulk ; Fastening.

794378-1 : Gold Through Hole, Right Angle Rectangular - Headers, Male Pin Connectors, Interconnect Header, Shrouded; MINI UMNL SGE CKT HDR ASSY SN. s: Color: Natural ; Connector Type: Header, Shrouded ; Contact Finish: Gold ; Contact Mating Length: 0.240" (6.10mm) ; : Board Lock ; Mounting Type: Through Hole, Right Angle ; Number of Positions Loaded: All ; Number.

MCS04020C3574FE000 : 3.57M Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 3.57M OHM 1/16W 1% SMD 0402. s: Resistance (Ohms): 3.57M ; Power (Watts): 0.063W, 1/16W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 50ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

592629-3 : Terminal Junction System Connectors, Interconnect Feedback Module Block; TERM JCT, F/B SZ21,32 BUSS. s: Type: Feedback Module Block ; Size / Dimension: 0.390" L x 0.850" W (9.91mm x 21.59mm) ; Module Capacity: - ; Contact Size: 21 (22HD) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

HER1602AS : 16 A, 100 V, SILICON, RECTIFIER DIODE. s: Arrangement: Common Anode ; Diode Type: RECTIFIER DIODE ; Diode Applications: Rectifier, EFFICIENCY ; IF: 16000 mA ; RoHS Compliant: RoHS ; Package: D2PAK, PLASTIC, D2PAK-3 ; Pin Count: 2 ; Number of Diodes: 2.

352027RJT : RESISTOR, METAL GLAZE/THICK FILM, 1 W, 5 %, 200 ppm, 27 ohm, SURFACE MOUNT, 2512. s: Category / Application: General Use ; Technology / Construction: Thick Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 2512, CHIP, ROHS COMPLIANT ; Resistance Range: 27 ohms ; Tolerance: 5 +/- % ; Temperature Coefficient: 200 ±ppm/°C ; Power.

0-C     D-L     M-R     S-Z