Digchip : Database on electronics components
Electronics components database



Details, datasheet, quote on part number: A14K1P
 
 
Part numberA14K1P
Category
DescriptionProcess Sealed Subminiature Rockers
CompanyNihon Kaiheiki Industry
DatasheetDownload A14K1P datasheet
 


 
Specifications, Features, Applications

Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and moneysaving automated soldering and cleaning. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Matching indicators available and shown at the end of Section M.

Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range ~ 28V) Note: Find additional explanation of operating range in Supplement section.

Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
Electrical Life: Nominal Operating Force: Contact Timing: Angle of Throw:

50 milliohms maximum 500 megohms minimum 500V AC minimum for 1 minute minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 50,000 operations minimum 2.73N (momentary); 1.84N (maintained) Nonshorting (break-before-make) 26

Actuator or Toggle: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals:

Nickel plated brass Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating

Operating Temperature Range: Humidity: Vibration: Shock:

30C through +85C (22F through ~ 95% humidity for 240 hours ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section.

UL Recognition or CSA Certification: The A Series rockers have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

Straight with Bracket Straight with Inline Bracket (Single Pole only) Right Angle with Bracket Vertical with Bracket Vertical with Inline Bracket (Single Pole only)

ON (ON) ON (ON) ON (ON) ON NONE OFF NONE OFF ON (ON) ON (ON) ON (ON) K K1
Snap Top for Rocker Code C Snap Top for Rockers Codes

Rocker DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Rockers & E Black White Red Yellow Green Blue Gray B C

DPDT ON-NONE-ON Circuit Right Angle PC Terminals



Some Part number from the same manufacture Nihon Kaiheiki Industry
WR13BSN Environmentally Sealed Rockers
JWM12RH Internationally Approved TV Rated Rockers
A25KP Process Sealed Subminiature Rockers
S421 Medium/high Capacity Standard Size Toggles
AS14BH Subminiature Slides
AB25AB-FA Process Sealed Subminiature Pushbuttons
G3T15AB Ultra-miniature Process Sealed SMT Toggles
LB16CKG01-A Standard Size Pushbuttons
P2011BP Internationally Approved Toggles
B23LP Process Sealed Subminiature Antistatic Toggles
A1SK1B1 Process Sealed Subminiature Rockers
G01VF Complement to G Switches
G15AP Process Sealed Ultra-miniature Toggles
B29LW Process Sealed Subminiature Antistatic Toggles
KB26RKW01 Miniature Pushbuttons
AS13AP Subminiature Slides
YB02WKW01 Complement to YB Pushbuttons
B1RHV Process Sealed Subminiature Antistatic Toggles
E2018-BA Light Duty Miniature Toggles
A1RH Process Sealed Subminiature Toggles
JPL26B-A Internationally Approved Pushbuttons