Details, datasheet, quote on part number: A14K1V
DescriptionProcess Sealed Subminiature Rockers
CompanyNihon Kaiheiki Industry
DatasheetDownload A14K1V datasheet


Features, Applications

Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and moneysaving automated soldering and cleaning. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Matching indicators available and shown at the end of Section M.

Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range ~ 28V) Note: Find additional explanation of operating range in Supplement section.

Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
Electrical Life: Nominal Operating Force: Contact Timing: Angle of Throw:

50 milliohms maximum 500 megohms minimum 500V AC minimum for 1 minute minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 50,000 operations minimum 2.73N (momentary); 1.84N (maintained) Nonshorting (break-before-make) 26

Actuator or Toggle: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals:

Nickel plated brass Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating

Operating Temperature Range: Humidity: Vibration: Shock:

30C through +85C (22F through ~ 95% humidity for 240 hours ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section.

UL Recognition or CSA Certification: The A Series rockers have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

Straight with Bracket Straight with Inline Bracket (Single Pole only) Right Angle with Bracket Vertical with Bracket Vertical with Inline Bracket (Single Pole only)

Snap Top for Rocker Code C Snap Top for Rockers Codes

Rocker DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Rockers & E Black White Red Yellow Green Blue Gray B C

DPDT ON-NONE-ON Circuit Right Angle PC Terminals


Some Part number from the same manufacture Nihon Kaiheiki Industry
WR13BFN Environmentally Sealed Rockers
P2012BZ Internationally Approved Toggles
WR18AS Environmentally Sealed Rockers
A01VF Complement to A Switches
JWL11BA Internationally Approved TV Rated Rockers
MS13ASG Miniature Slides
B2SHV Process Sealed Subminiature Antistatic Toggles
M2113LCFG LED Tipped Actuators
A18K1B1 Process Sealed Subminiature Rockers
AB21BB-FA Process Sealed Subminiature Pushbuttons
G3T19AP Ultra-miniature Process Sealed SMT Toggles
M2123PEG LED Tipped Actuators
JWL22BA Internationally Approved TV Rated Rockers
B2RLP Process Sealed Subminiature Antistatic Toggles
G18AP Process Sealed Ultra-miniature Toggles
B15HH Process Sealed Subminiature Antistatic Toggles
G23AH Process Sealed Ultra-miniature Toggles
G3T12AB Ultra-miniature Process Sealed SMT Toggles

MB2085SB3W05 : Miniature Pushbuttons

JWMW21RH1 : Internationally Approved TV Rated Rockers

D2N202LF18 : 2 Arms 120,240 Vrms

AS24BH : Subminiature Slides

M2T23SA5W05 : Process Sealed Miniature Toggles

KB25SKG01 : Miniature Pushbuttons

SCB26P15A-3B : Snap Switch Pushbuttons

MB2411E1W25 : Snap-action Pushbuttons

M2122RFW : LED Tipped Actuators

Same catergory

1N3595 : High Conductance Fast Diode. Maximum Repetitive Reverse Voltage Average Rectified Forward Current Non-repetitive Peak Forward Surge Current Pulse Width = 1.0 second Pulse Width = 1.0 microsecond Storage Temperature Range Operating Junction Temperature *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings.

DTA144TT1 : Bias Resistor Transistors. Bias Resistor Transistor , Package: SC-59, Pins=3.

M5M5256DRV-15VLL-I : 262144-bit (32768-word BY 8-bit) CMOS Static RAM. The is 262,144-bit CMOS static RAMs organized by 8-bits which is fabricated using high-performance 3 polysilicon CMOS technology. The use of resistive load NMOS cells and CMOS periphery results in a high density and low power static RAM. Stand-by current is small enough for battery back-up application. It is ideal for the memory systems which require.

XZDVG05A3 : Material (Color) = InGaAIP(Green);; Lens = ;; Peak Wave Length = 574;; Iv(ucd) If@10mA Min.= 4700;; Iv(ucd) If@10mA Typ.= 25000.

S7145LSF : Bipolar Linear Integrated Circuit. Micro computer circuits in mobile phones, word processors, TVs, VCRs etc General logic circuits Detection of voltage drop in batteries of note personal computers, mobile phones Switching to backup power supply Super Low Current Consumption (ICCL =100 Typ. I CCH =1 Typ.) It has on delay function to supplement the constant of outer C and R Low operation.

3050/1 BR001 : Wire - Single Conductor 24AWG SOLID PVC 1000ft SPOOL BROWN. » » » » Wire & Shielding Supplies for Guitar Wiring Wire & Shielding Supplies for Guitar Wiring Wire and shielding supplies for audio can make a great difference in the end result of the sound experience. Shielding is necessary to isolate conductors from electromagnetic.

24LCS61-I/ST : Memory Integrated Circuit (ics) EEPROM Tube 2.5 V ~ 5.5 V; IC EEPROM 1KBIT 400KHZ 8TSSOP. s: Memory Type: EEPROM ; Memory Size: 1K (128 x 8) ; Speed: 100kHz, 400kHz ; Interface: I²C, 2-Wire Serial ; Package / Case: 8-TSSOP (0.173", 4.40mm Width) ; Packaging: Tube ; Voltage - Supply: 2.5 V ~ 5.5 V ; Operating Temperature: -40C ~ 85C ; Format.

XW2B-1 : - Terminal Block - Adapter Connectors, Interconnect -; CONNECTOR (UNIT, EXPANSION). s: Convert From (Adapter End): - ; Convert To (Adapter End): - ; Mounting Type: - ; Wire Gauge: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

TNPW040288K7BETD : 88.7K Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 88.7K OHM 1/16W 0.1% 0402. s: Resistance (Ohms): 88.7K ; Power (Watts): 0.063W, 1/16W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.

ERJ-S06F1581V : 1.58K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES ANTI-SULFUR 1.58KOHM 1% 0805. s: Resistance (Ohms): 1.58K ; Power (Watts): 0.125W, 1/8W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

PZU5.1B,115 : Diode - Zener - Single Discrete Semiconductor Product 2A @ 1.5V 5.1V 310mW Surface Mount; DIODE ZENER 5.1V 310MW SOD323F. s: Voltage - Zener (Nom) (Vz): 5.1V ; Power - Max: 310mW ; Impedance (Max) (Zzt): 60 Ohm ; Voltage - Forward (Vf) (Max) @ If: 1.1V @ 100mA ; Current - Reverse Leakage @ Vr: 2A @ 1.5V ; Tolerance: 5% ; Mounting Type: Surface Mount.

BV048-5384.0 : Through Hole Power Transformer 10 VA; TRANSFORMER 230V 15V 666MA. s: Mounting Type: Through Hole ; Type: Standard ; Primary Winding(s): Single ; Secondary Winding(s): Single, No Center Tap ; Series Output Voltage @ Current: 15 VAC @ 666mA ; Parallel Output Voltage @ Current: - ; Maximum Power: 10 VA ; Lead Free Status: Lead Free ; RoHS Status: RoHS.

103349-1 : Rectangular - Accessory Connectors, Interconnect Cap (Cover); 16POS LEVEL V COVER .125CL. s: Accessory Type: Cap (Cover) ; Number of Positions: 16 ; For Use With/Related Products: AMPMODU Mod IV Series ; : 2 Required Per Connector ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

VLF504015MT-3R3M-CA : INDUCTOR POWER 3.3UH SMD. TDK VLF-M series power inductor is a magnetically-shielded, wound inductor designed for use in power circuits. The VLF-M boasts a low profile and very-low core loss. s: Family: Fixed Inductors ; Series: VLF-M ; Packaging  : Tape & Reel (TR)   ; Type: Wirewound ; Material - Core: Ferrite ; Inductance: 3.3H.

0-C     D-L     M-R     S-Z