Details, datasheet, quote on part number: HA48110E-10
PartHA48110E-10
CategoryDiscrete => Solid State relays
DescriptionZero Cross0.15-110 Amps RMS24-280 Volts RMS90-280 Control - Volts RMS
CompanyCrydom Corporation
DatasheetDownload HA48110E-10 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

120/240, 480 Vac AC Output Zero Voltage and Random Turn-On Switching Panel Mount Internal Snubber

Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Output consists of an SCR AC switch and is available in zero-cross, random turn-on (phase controllable) and versions with either or DC input (coil) control. Manufactured in Crydom's ISO 9001 Certified facility for optimum product performance and reliability.

Integrated Overvoltage Protection by Automatic Self Turn-On (Suffix P)
Operating Voltage (47-63 Hz) [Vrms] Max. Load Current

Min. Load Current, [mArms] Transient Overvoltage [Vpk] Max. Surge Current, (16.6ms) [Apk] Max. On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case JC ) [C/W] Maximum 2 t for Fusing, (8.3 msec.) [A 2sec] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/sec] Max. Turn-On Time Max. Turn-Off Time Power Factor (Min.) with Max. Load

1/2 Cycle (DC Control), 10.0 msec (AC Control) 1/2 Cycle (DC Control), 40.0 msec (AC Control)

Control Voltage Range Max. Reverse Voltage Max. Turn-On Voltage Min. Turn-Off Voltage Nominal Input Impedance Typical Input Current

90-280 Vrms (60Hz) --90 Vrms 10 Vrms 60K Ohms @ 120 Vrms, @ 240 Vrms
2002 CRYDOM CORP, Specifications subject to change without notice.

All parameters at 25C unless otherwise specified. Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Heat sinking required, for derating curves see page 2. Turn-on time for random turn-on versions is 0.02 msec (DC Control Models). Input circuitry for 480V models incorporates active current limiter with 2mA typical input current..

For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: (0)1202 365070 FAX (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY:

GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output/Base Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range MECHANICAL SPECIFICATIONS Weight: (typical) Encapsulation: Terminals: 4000 Vrms 10 9 Ohm 125C 3.0 oz. (86.5g) Thermally Conductive Epoxy Screws and Saddle Clamps Furnished, Unmounted

AVAILABLE OPTIONS G 24 Vac Input (18-36 Vac) Example: A24110E Input Status LED. Agencies Approval Pending Example: HD48125G Note: Control Voltage Range 4.5-32Vdc for DC Control Models.

Crydom Heat Sinks offer excellent thermal management and are per fectly matched to the load current ratings of Crydom panel mount relays. Request Crydom's Heat Sink specification sheet for all the details.

SOLID-STATE RELAY Internal Overvoltage Protection. Relay Will Self Trigger Between 4 3 INPUT 450-600 Vpk (for 240Vac Models & 900-1200Vpk (for 480Vac Models125A). Not Suitable For Capacitive Loads. 1.00.78 BASE PLATE Agencies Approval Pending. 6-32 TERMINAL PLACES).90 1.80 Example: D24125P (AC & DC Control) (22.9) (45.7) Example: HD48125P (AC & DC Control) Ordering System: Combination of the suffixes should be made in the following order: Random Turn-On (AC & DC Control) All dimensions are in inches (millimeters) EPG-10. Phase Controllable (DC Control) Example: HA48125EPG-10 Example: D24110-10

Screw Torque Requirements: 6-32 Screws - 10 in./lbs., 8-32 and 10-32 Screws - 20in./lbs. (Screws dry without grease.)

Load Current [Arms] Max Ambient Temp. [C]

For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: (0)1202 365070 FAX (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY:


 

Related products with the same datasheet
A24110-10
A24110E
A24110E-10
A24125
A24125-10
A24125E
A24125E-10
D24110
D24110-10
D24125
D24125-10
HA48110
Some Part number from the same manufacture Crydom Corporation
HA4812 Zero Cross0.04-12 Amps RMS48-530 Volts RMS90-280 Control - Volts RMS
HA48125 Zero Cross0.15-110 Amps RMS24-280 Volts RMS90-280 Control - Volts RMS
HA4812E Zero Cross0.04-12 Amps RMS48-530 Volts RMS90-280 Control - Volts RMS
HA60125 Zero Cross0.15-125 Amps RMS48-660 Volts RMS90-280 Control - Volts RMS
HD48110 Zero Cross0.15-110 Amps RMS24-280 Volts RMS90-280 Control - Volts RMS
HD4812 Zero Cross0.04-12 Amps RMS48-530 Volts RMS90-280 Control - Volts RMS
HD48125 Zero Cross0.15-110 Amps RMS24-280 Volts RMS90-280 Control - Volts RMS
HD4825 Zero Cross0.04-12 Amps RMS48-530 Volts RMS90-280 Control - Volts RMS
HD60125 Zero Cross0.15-125 Amps RMS48-660 Volts RMS90-280 Control - Volts RMS
HPF240D20 Zero Cross0.15-20 Amps RMS12-280 Volts RMS4-32 Control - Volts DC
IAC15 Series Iac, ac Input Module
ICT
ICT-45C Ict Series (1500w) Metal Axial Transient Voltage Suppressers
ICT-5
ICTE-45C Icte Series (1500w) Axial Transient Voltage Suppressers
ICTE-5
IDC15 Series Idc, (s)midc, X4idc, DC Input Modules
ITCE

M505032V : Power Module

CTA12-1000CW : Triacs 12A Triacs 12A 400V - 1000V Isolated and non-isolated Types: Logic level, alternistor (No snubber) and standard (Four quadrant triggering) TO-220AB package

EFG20BF : Power Modules

M5010053FV : Power Modules

SSC800-25-24 : Solid State Relays - Chassis Mount CONTACTOR 10-12VDC Specifications: Manufacturer: Crydom ; Product Category: Solid State Relays - Chassis Mount ; RoHS:  Details ; Load Voltage Rating: 800 V ; Load Current Rating: 25 A ; Mounting Style: Panel ; Relay Type: Solid State ; Series: SSC ; Factory Pack Quantity: 1 ; Termination Style: Screws and Saddle

PRGD60150 : TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX Specifications: Mounting: PLASTIC PACKAGE ; Maximum Switching Current: 150.00 amps ; Isolation Voltage: 4 kilovolts ; Operating Temp: -22 to 176 F (243 to 353 K)

PSD4825F : TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX Specifications: Mounting: ROHS COMPLIANT, PLASTIC PACKAGE-4 ; Maximum Switching Current: 25.00 amps ; Isolation Voltage: 4 kilovolts ; Approvals: RoHS ; Operating Temp: -40 to 176 F (233 to 353 K)

RS6F822D : 1 ELEMENT, 820 uH, GENERAL PURPOSE INDUCTOR Specifications: Devices in Package: 1 ; Lead Style: WIRE ; Application: General Purpose ; Inductance Range: 820 microH ; Operating Temperature: -20 to 120 C (-4 to 248 F)

 
0-C     D-L     M-R     S-Z