|
Details, datasheet, quote on part number:HD48125
| |
| Part: | HD48125 |
| Category: | Discrete => Solid State relays |
| Description: | Zero Cross0.15-125 Amps RMS48-530 Volts RMS3-32 Control - Volts DC |
| Company: | Crydom Corporation |
| Datasheet: | Download HD48125 datasheet File size : 53 kB |
| Request For quote: | Find where to buy HD48125
|
| |
Datasheet text preview:
Series 1 - 110/125A
120/240, 480 Vac · AC Output · Zero Voltage and Random Turn-On Switching · Panel Mount · Internal Snubber
Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Output consists of an SCR AC switch and is available in zero-cross, random turn-on (phase controllable) and versions with either AC or DC input (coil) control. Manufactured in Crydom's ISO 9001 Certified facility for optimum product performance and reliability.
HA48110 HD48110 HA48125 HD48125
· Integrated Overvoltage Protection by Automatic Self Turn-On (Suffix P)
MODEL NUMBERS
AC CONTROL D C CONTROL
A24110 D24110
A24125 D24125
O U T P U T SPECIFICATIONS
Operating Voltage (47-63 Hz) [Vrms] Max. Load Current
24-280 110 150 600 1500 1.7 .25 9,340 10 500
24-280 125 150 600 1750 1.7 .22 12,700 10 500
48-530 110 150 1200 1500 1.7 .25 9,340 10 500
48-530 125 150 1200 1750 1.7 .22 12,700 10 500
[Arms]
Min. Load Current, [mArms] Transient Overvoltage [Vpk] Max. Surge Current, (16.6ms) [Apk] Max. On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (R JC [°C/W] ) Maximum I 2 t for Fusing, (8.3 msec.) [A 2sec] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] Max. Turn-On Time Max. Turn-Off Time Power Factor (Min.) with Max. Load
1/2 Cycle (DC Control), 10.0 msec (AC Control) 1/2 Cycle (DC Control), 40.0 msec (AC Control) 0.5 0.5 0.5 0.5
I N P U T SPECIFICATIONS
Control Voltage Range Max. Reverse Voltage Max. Turn-On Voltage Min. Turn-Off Voltage Nominal Input Impedance Typical Input Current
D C CONTROL
(D PREFIX)
A C CONTROL
(A PREFIX)
AC CONTROL
(E SUFFIX)
3-32 Vdc -32 Vdc 3.0 Vdc 1.0 Vdc 1500 Ohms (120/240V Models) 3.4mA @ 5 Vdc, 20mA @ 28Vdc
90-280 Vrms (60Hz) --90 Vrms 10 Vrms 60K Ohms 2mA @ 120 Vrms, 4mA @ 240 Vrms
18-36 Vrms --18 Vrms 4.0 Vrms 9.0K Ohms 3mA @ 24 Vrms
G E N E R A L NOTES
© 2002 CRYDOM CORP, Specifications subject to change without notice.
All parameters at 25°C unless otherwise specified. Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Heat sinking required, for derating curves see page 2. Turn-on time for random turn-on versions is 0.02 msec (DC Control Models). Input circuitry for 480V models incorporates active current limiter with 2mA typical input current..
For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 · FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506
FastFax Document No. 152 110/125. Rev. 042302 PAGE 1 OF 2
SeriesVac · - 110/125A 1 AC Output 120/240, 480
G E N E R A L SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output/Base Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range M E C H A N I C A L SPECIFICATIONS Weight: (typical) Encapsulation: Terminals: 4000 Vrms 10 9 Ohm 8 pF -40 to 80°C -40 to 125°C 3.0 oz. (86.5g) Thermally Conductive Epoxy Screws and Saddle Clamps Furnished, Unmounted
A V A I L A B L E OPTIONS E G 24 Vac Input (18-36 Vac) Example: A24110E Input Status LED. Agencies Approval Pending Example: HD48125G Note: Control Voltage Range 4.5-32Vdc for DC Control Models.
Crydom Heat Sinks offer excellent thermal management and are per fectly matched to the load current ratings of Crydom panel mount relays. Request Crydom's Heat Sink specification sheet for all the details.
MOUNTING HOLE/SLOT 0.17 (4.3) DIA.
1.10 (27.9) .45 (11.4)
8-32 TERMINAL (2 PLACES )
P
-10
SOLID-STATE RELAY Internal Overvoltage Protection. -+ Relay Will Self Trigger Between 4 3 INPUT 450-600 Vpk (for 240Vac Models 125A) & 900-1200Vpk (for 480Vac Models125A). Not Suitable For Capacitive Loads. 1.00 .78 BASE PLATE Agencies Approval Pending. 6-32 TERMINAL (25.4) (19.8) .125 (3.2) (2 PLACES) .90 1.80 Example: D24125P (AC & DC Control) (22.9) (45.7) Example: HD48125P (AC & DC Control) Ordering System: Combination of the suffixes should be made in the following order: Random Turn-On (AC & DC Control) All dimensions are in inches (millimeters) EPG-10. Phase Controllable (DC Control) Example: HA48125EPG-10 Example: D24110-10
Screw Torque Requirements: 6-32 Screws - 10 in./lbs., 8-32 and 10-32 Screws - 20in./lbs. (Screws dry without grease.)
1
1.87 (47.5)
OUTPUT
2
2.30 (58.4) 1.70 (43.2)
C U R R E N T DERATING CURVES
110A
160
Base Plate Temp [°C]
.4°C/W
125A
160 90
.2°C/W .5°C/W .4°C/W
90
.2°C/W
Power Dissipation
100 80
1°C/W
Power Dissipation
120
120 80
.5°C/W
100
1°C/W
110 40 120 0 30 60 90 120 0 20 40 60 80
Load Current [Arms] Max Ambient Temp. [°C]
110 40 120 0 30 60 90 120 0 20 40 60 80
Load Current [Arms] Max Ambient Temp. [°C]
© 2002 CRYDOM CORP, Specifications subject to change without notice.
APPROVALS UL E116950
FastFax Document No. 152 110/125 Rev. 042302 PAGE 2 OF 2
For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 · FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506
Base Plate Temp [°C]
|
|
