|Category||Power Management => DC-DC Converters|
|Description||3.3V Non-isolated, 8-40W, Single Output DC/DC Converter|
|Datasheet||Download UNR-3.3/12000-D5 datasheet
Low cost or 12V inputs 3.3V±1% (±33mV) outputs ±0.25% (±8mV) max. line regulation ±0.5% (±17mV) max. load regulation Guaranteed efficiencies to 86% Power densities to 29W/in3 High output current... small packages: x 1" package) x 1" package) No heat sinks required to +100oC operating temperatures On/off/sync control UL, CSA, IEC safety approvals
New low-voltage microprocessor and memory chips are driving the migration from centralized to distributed power processing in modern telecommunication and computer systems. Powering these new chips requires local, on-board power converters that rapidly source large amounts of current while maintaining accurate voltages with minimal ripple and noise. The distribution losses, unpredictable regulation and poor transient response of traditional centralized power systems are no longer acceptable. Power processing at the "point-of-use" is frequently the only way to achieve desired performance. DATEL's new UNR Series of non-isolated, 3.3V output, or 12V input, switching DC/DC converters were specifically designed for on-board usage in today's mixedlogic 5V/3.3V systems. They also support those systems that are already drawing maximum current from their 5V buses and must resort to their 12V buses. These low-cost, extremely efficient (typically 90%) power converters are capable of delivering full rated output currents (2.5-12 Amps) while maintaining low case temperatures without the need for heat sinks or any auxiliary cooling. UNR Series devices combine proven circuit architectures, contemporary SMT-on-ceramic and SMT-on-pcb assembly techniques, and a new thermally-conductive potting compound to achieve high output power in the smallest packages possible. DATEL is currently developing UNR Series devices that incorporate active load sharing with output current/voltage-sensing capabilities. We can also quickly modify existing devices for application-specific output voltages from to 5 Volts. Please contact us with your unique requirements... we may already have the product you need. DATEL also makes a complete line of isolated 3.3V DC/DC converters that operate from wide-range input voltages from to 72V.
DATEL, Inc., 11 Cabot Boulevard, Mansfield, MA 02048 (U.S.A.) Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 Email: email@example.com
Typical = +25°C under nominal line voltage and full load conditions unless otherwise noted. These devices require external input and output capacitors for normal operation. 20MHz bandwidth. Specified with external I/O capacitors. See Technical Notes. to 100% load. Nominal line voltage, no load/full load conditions. Model is no longer available. Use DATEL model UNR-3.3/12-D5 for replacement.
Output Configuration: U = Unipolar Non-Isolated Nominal Output Voltage: 3.3 Volts Maximum Output Current in mA Input Voltage Range: = 4.75-5.5 Volts (5V nominal) = 10.8-13.2 Volts (12V nominal)
I/O Connections Function P9 Function P10 Logic Gnd. Do Not Connect On/Off Control No Connect +Output Output Rtn. Output Rtn. Input Rtn. Input Rtn. +InputTypical = +25°C under nominal line voltage and full load conditions unless noted.
Input Voltage Range: "D5" Models "D12" Models Input Current Input Filter Type Overvoltage Shutdown Reverse-Polarity Protection On/Off (Sync.) Control (Pin 2) 4.75-5.5 Volts (5V nominal) 10.8-13.2 Volts (12V nominal) See Ordering Guide None Yes (Instantaneous, 10A maximum) TTL high = off, low (or open) = on Output VOUT Accuracy (50% load) Temperature Coefficient Ripple/Noise (20MHz BW) Line/Load Regulation Efficiency Current Limiting ±1% ±0.02% per °C See Ordering Guide See Ordering Guide See Ordering Guide Auto-recovery Dynamic Characteristics Transient Response (25% load step) Switching Frequency: "D5" Models "D12" Models ±1.5% of final value
Absolute Maximum Ratings These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Specifications Table is not implied. Storage temperatures have been verified for 168 hours.
Input Voltage: "D5" Models "D12" Models Input Reverse-Polarity Protection Output Overvoltage Protection Output Current
7 Volts 15 Volts Current must be <10A. Brief duration. Fusing recommended. None Current limited. Max. current and short-circuit duration model dependent. +105°C +300°C
Operating Temperature (ambient): Without Derating: 8A "D5" Models 12A "D5" and 2.5A "D12" Models With Derating Storage Temperature
Physical Dimensions: 3A "D5" and 2.5A "D12" Models 8A "D5" Model Shielding Case Connection Case Material Pin Material Weight: 3A "D5" and 2.5A "D12" Models 8A "D5" Model 11.4mm) 5-sided Pin 4 (Output Return) Corrosion resistant steel with epoxy-based enamel finish Brass, solder coated 1 ounce (28.4 grams) 1.5 ounces (42.5 grams)
These power converters require a minimum 10% loading to maintain specified regulation. Operation under no-load conditions will not damage these devices, however, they may not meet all listed specifications. These power converters do not have internal input filters and do require external input and output capacitors to achieve rated specifications. Application-specific internal input/ output filtering can be added upon request. Contact DATEL for details. On/Off Control pins are included on "D5" models only. See Technical Notes for details. Applying a voltage to the Control pin when no input power is applied to the converter can cause permanent damage to the converter. Cases can be provided with 6-sided shielding. Contact DATEL for details.
|Related products with the same datasheet|
|Some Part number from the same manufacture Datel, Inc.|
|UNR-3.3/15-D5 DC/DC Power Converters|
|UNR-3.3/2500-D12 3.3V Non-isolated, 8-40W, Single Output DC/DC Converter|
|UNR-3.3/3-D12 DC/DC Power Converters|
|UNR-3.3/3000-D5 3.3V Non-isolated, 8-40W, Single Output DC/DC Converter|
|UNR-3.3/8-D12SM DC/DC Power Converters|
|UNR-3.3/8-D5 Single Output Unr Series Non-isolated, 5v-to-3.3v 8 And 10 Amp, DC/DC Converters|
|UNR-3.3/8-D5SM DC/DC Power Converters|
|UNR-3.3/8000-D5 3.3V Non-isolated, 8-40W, Single Output DC/DC Converter|
|UNR-5/10-D12 DC/DC Power Converters|
|UNR25-50W DC/DC Power Converters|
|UNRSeries Non-isolated, 5v-to-3.3v 8 And 10 Amp, DC/DC Converters|
|UNRSeries12V-5V Non-isolated, 12v-to-5v 5 Amp, DC/DC Converters|
|UNRSeries5V-2.5V Non-isolated, 5v-to-2.5v 8 And 10 Amp, DC/DC Converters|
|UNRSeries5V-3.3V Non-isolated, 5v-to-3.3v 3 Amp, DC/DC Converters|
|UNS-3.3/3-D5 DC/DC Power Converters|
|UNS-3.3/3Series 10-15w, DC/DC Converter|
|UNS-5/3-D12 DC/DC Power Converters|
|UNS-5/3SERIE 10-15w, DC/DC Converter|
AD4016M96RBA-5 : Low Voltage Operation is More Suitable to be Used on Battery Backup, Portable Electronic.
AD408M321RBA-5 : Low Voltage Operation is More Suitable to be Used on Battery Backup, Portable Electronic.
BA6853FS : 3-phase Motor Driver For Cd-roms. The BA6848FP and BA6853FS are single-chip ICs developed for CD-ROM spindle motor drives. These ICs are 3phase, full-wave, pseudo-linear drives with FG output, FG composite output, and reverse-rotation pins built-in for high functionality and high performance. FApplications CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-RAM F 1) Three-phase, full wave, pseudo-linear.
BS1301-7R : 100 Watt DC-DC Converters. Wide input voltage ranges from 1or 2 isolated outputs kV AC I/O electric strengh test voltage Rugged electrical and mechanical design Fully isolated outputs Operating ambient temperature range 4071 °C with convection cooling Output 1 Uo nom Io nom [V DC] [A] Output 1 Uo nom Io nom [V DC] [A] Output 2 Uo nom Io nom [V DC] [A] Output 2 Uo nom Io nom [V DC] [A] Type.
D15SB10 : 15a ( Sip ) Bridge Rectifiers.
KA3S0680RFB : 6A/800V QRC Power Switch. Wide operatimg frequency range to (150kHz) Pulse by pulse over current limiting Over load protection Over voltage protecton (Min. 23V) Internal thermal shutdown function Under voltage lockout Internal high voltage sense FET External sync terminal Auto Restart Mode The Fairchild Power Switch(FPS) product family is specially designed for an off line SMPS.
LMZ1001-7R : 50 Watt Ac-dc Converters. Input voltage range or 3 isolated outputs kV AC I/O electric strength test voltage Rugged electrical and mechanical design Outputs individually controlled with excellent dynamic properties Operating ambient temperature range 4071°C with convection cooling Options Input voltage Input frequency Inrush current limitation continuous range by thermistor.
LT1460 : 2.5v Reference. Maximum Initial Tolerance: 0.2% Guaranteed Temperature Stability Maximum 0.6 Dynamic Impedance Wide Operating Current Range Directly Interchangeable with LM136 for Improved Performance No Adjustments Needed for Minimum Temperature Coefficient The is a precision trimmed 2.5V shunt regulator diode featuring a maximum initial tolerance of only ± 5mV. The low dynamic.
M62023FP : System Reset ic With Switch For Memory Back-up. SYSTEM RESET IC WITH SWITCH FOR MEMORY BACK-UP The is a system reset IC that controls the memory backup function of an SRAM and an embedded RAM of a microcontroller. The IC outputs reset signals (RES/RES) to a microcontroller at power-down and power failure. It also shifts the power supply to RAMs from main to backup, outputs a signal (CS) that invokes.
MC34063A : SMPS Controller. Operation from to 40V input Short circuit current limiting Low standby current Output switch current of 1.5A without external transistors Output voltage adjustable Frequency of operation from to 100KHz Step up, Step down or inverting switching regulators The is a monolithic regulator sub system intended for use to DC converter. This device contains.
PT3324 : . Input Voltage Range: 75V 1500 VDC Isolation On/Off Control Vo Adjust Differential Remote Sense Current Limit Short-Circuit Protection Over-T emperature Shutdown Undervoltage Lockout UL1950 Recognized Flexible SIP Package CSA 22.2 950 Certified EN60950 Approved VDE Licensed 4.9 x106 Hrs MTBF Meets FCC Class A Radiated Limits The PT3320 series is a single-output.
PT7742 : Non-Isolated DC-DC Converters. The a 20 Amp "Current Booster" for the PT7708 housed in the same 27-pin SIP package. Multiple PT7742 boosters will operate in parallel with one PT7708 product, boosting output current in increments of 20A. Combinations a PT7708 regulator and PT7742 current boosters can supply power for virtually any multiple mega-processor application. A PT7742 current.
REG710NA-2.5/250 : Switching Charge Pumps. ti REG710-25, 30-mA Switched-cap DC-DC Converter With Fixed 2.5-V Output.
SMCTAA65N14A10 : . This voltage controlled Solidtron (VCS) discharge switch utilizes an n-type MOS-Controlled Thyristor mounted in a five leaded TO247 plastic package. The VCS the high peak current capability and low Onstate voltage drop common to SCR thyristors combined with extremely high dI/dt capability. This semiconductor is intended for the control of high power.
TDD25-03S2 : DC-DC Converter 25Watt. LOW COST & 3:1 WIDE INPUT RANGE I/O ISOLATION INPUT Pi FILTER SHORT CIRCUIT PROTECTION HIGH PERFORMANCE 2 YEARS WARRANTY OUTPUT WATTAGE VOLTAGE Single Output Models Block diagram for TDD25 series with single output Vi + Switching Device Vi Opto Isolation Reference & Error Amp. Rectifier Block diagram for TDD25 series with dual output Vi + Rectifier.
ISL6296 : FlexiHash™ For Battery Authentication The ISL6296 is a highly cost-effective fixed-secret hash engine based on Intersil’s FlexiHash™ technology. The device authentication is achieved through a challengeresponse scheme customized for low-cost applications, where cloning via eaves-dropping without knowledge of the device’s secret code is not economically.
BQ24314 : Charger Front End Protection IC With 30V Max Vin And 5.85V OVP The bq24314 and bq24316 are highly integrated circuits designed to provide protection to Li-ion batteries from failures of the charging circuit. The IC continuously monitors the input voltage, the input current, and the battery voltage. In case of an input overvoltage condition, the IC immediately.
ADP1653 : Compact, High Efficiency, High Power, Flash/Torch LED Driver With Dual Interface The ADP1653 is a very compact, high efficiency, high power, camera flash LED driver optimized for cellular phones. The high efficiency and dynamic LED current control of the device improve flash brightness and picture quality in dimly lit environments. Efficiency peaks.
HMC981 : Active Bias Controller HMC981 is an active bias controller that automatically adjusts the gate voltage of an external amplifier to achieve constant bias current. It can be used to bias any enhancement and depletion type amplifiers operating in Class-A regime with Drain voltages from 4V to 12V and drain currents up to 200mA, offering a complete biasing.
ULN2003V12 : Low Power Relay Driver The ULN2003V12 is a low power upgrade of TI’s popular ULN2003 family of 7-channel Darlington transistor array. The ULN2003V12 sink driver 7 low output impedance drivers that minimize on-chip power dissipation. When driving a typical 12V relay coil a ULN2003V12 will dissipate up to 12 times lower power than an equivalent ULN2003A.