Details, datasheet, quote on part number: UNR-5/10-D12
CategoryPower Management => DC-DC Converters
DescriptionDC/DC Power Converters
CompanyDatel, Inc.
DatasheetDownload UNR-5/10-D12 datasheet
Find where to buy


Features, Applications


No external I/O filtering required to +13.6V input (50mV), 5 Amp output Synchronous-rectifier topology 300kHz switching frequency Low output noise, 60mVp-p Quick transient response, 30sec High efficiency, to +70C operation with no derating On/off control; Undervoltage shutdown Output trim capability x 2" metal package; EMC compliant IEC950/EN60950/UL1950 pending Modifications and customs for OEM's

When you're faced with upgrading your system's +5V power supply because your new, high-speed, 5V electronics simply demand too much current, consider tapping into your +12V line with one of DATEL's new, low-cost, 12V-to-5V DC/DC converters. These non-isolated buck regulators deliver to 5 Amps of clean (60mVp-p noise), rapidly responding (30sec step response) 5V current. They are housed in standard x 2" metal packages and require absolutely no external filtering to achieve specified performance. The UNR-5/5-D12 achieves its high power density (25W/in3) through circuit topology and packaging. Its 91% efficient, fixed-frequency (300kHz), synchronousrectifier design is packaged, with thermally conductive potting compound, in a heatradiating, black metal case. It achieves low cost and high reliability through its use of proven, fully automated, SMT-on-pcb assembly techniques. Consequently, every 1 Amp of 12V current gives you 2.2 Amps of additional 5V current at an incremental cost. The impressively efficient UNR-5/5-D12 delivers it full rated 25W output power over the to +70C ambient temperature range without heat sinking or forced-air cooling. Units derate to +100C ambient. Devices are fully line (0.25% max.) and load (0.5% max.) regulated and feature user-optional remote on/off control and output-voltage trim capabilities (from to 6 Volts). If you need more 5V current and you've already rejected the use of inefficient, step-down, linear regulators, take a look at one of DATEL's "switchers." Their high efficiency and ease of use may surprise you. Safety agency approvals and full EMI/EMC characterization tests are currently in progress.

DATEL, Inc., Mansfield, MA 02048 (USA) Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 Email: Internet:

Typical = +25C under nominal line voltage and full-load conditions, with no external I/O filtering, unless noted.

Input Voltage Output Current 15 Volts Current limited. Devices can withstand a sustained output short circuit without damage. +105C +300C

Input Voltage Range Input Current Input Filter Type Overvoltage Protection Reverse-Polarity Protection Start-Up Threshold Undervoltage Shutdown On/Off Control (Pin 3) VOUT Accuracy (50% load) Temperature Coefficient Ripple/Noise (20MHz BW) Line/Load Regulation Efficiency Current Limiting Transient Response (50% load step) Switching Frequency Operating Temperature (Ambient): Without Derating With Derating Storage Temperature Dimensions Shielding Case Connection Case Material 10.8-13.6 Volts (12V nominal) 40/2290mA Capacitive None 10.2V typical, 10.4V maximum 9.6V typical, 8.2V minimum TTL high (or open) = on, low = off

Storage Temperature Lead Temperature (soldering, 10 sec.)

These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Specifications Table is not implied.

The On/Off Control pin has an internal 10k pull-up resistor to +VIN. It can be driven with any logic circuit capable of meeting the following drive requirements. Logic to +0.8V. Logic +2.0V to +VIN. IIH (@VIN = 1.2mA. IIL (@VIN = 1.4mA. Open collector logic or a single NPN drive transistor can be used. The drive circuit should be rated for more than 13.6V. Applying a voltage to pin 3 when no input power is applied to the converter can cause permanent damage to the converter.

1% (50mV) maximum 0.02% per C 60mVp-p typical, 85mVp-p maximum 0.25% maximum/0.5% maximum 91% typical, 87% minimum Auto-recovery

5-sided Pin 2 (Input Return) Corrosion resistant steel with non-conductive, epoxy-based, black enamel finish and plastic baseplate Brass, solder coated 1.6 ounces (45.4 grams)

Pin Function P21 +Input Input Return On/Off Control +Output Output Return Trim

These devices have no minimum load requirements and will regulate under no-load conditions. No-load/full-load conditions. When the unit is off, the input "standby" current is typically 10mA. Upon start-up, devices will not regulate properly until the input voltage reaches approximately +10.2V. If the input subsequently drops below +9.6V, devices will turn off. Restart requires bringing the input back to +10.2V. See On/Off Control Functionality. Output noise may be reduced by installing external capacitors across the output terminals. Caps should be selected for low ESR (typ. 60m) and located as close to the unit as possible. Current limiting initiates at approximately 30% above rated load. Under short-circuit conditions, output current folds back to approximately 200mA and remains there until the short is removed.

Non-Isolated, 12V-to-5V, 25 Watt, DC/DC Converter Non-Isolated, 12V-to-5V, 40 Watt, DC/DC Converter Non-Isolated, 12V-to-5V, 50 Watt, DC/DC Converter

DATEL, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 Tel: Fax: (508) 339-6356 Internet: Email: Data Sheet Fax Back: (508) 261-2857

DATEL (UK) LTD. Tadley, England Tel: (01256)-880444 DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: 01-34-60-01-01 DATEL GmbH Mnchen, Germany Tel: 89-544334-0 DATEL KK Tokyo, Japan Tel: 3-3779-1031, Osaka Tel: 6-6354-2025

DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.


Related products with the same datasheet
Some Part number from the same manufacture Datel, Inc.
UNR-5/5-D12 DC/DC Power Converters
UNR25-50W DC/DC Power Converters
UNRSeries Non-isolated, 5v-to-3.3v 8 And 10 Amp, DC/DC Converters
UNRSeries12V-5V Non-isolated, 12v-to-5v 5 Amp, DC/DC Converters
UNRSeries5V-2.5V Non-isolated, 5v-to-2.5v 8 And 10 Amp, DC/DC Converters
UNRSeries5V-3.3V Non-isolated, 5v-to-3.3v 3 Amp, DC/DC Converters
UNS-3.3/3-D5 DC/DC Power Converters
UNS-3.3/3Series 10-15w, DC/DC Converter
UNS-5/3-D12 DC/DC Power Converters
UNS-5/3SERIE 10-15w, DC/DC Converter
UPB-12/2.1-Q12 25-40w, DC/DC Converter
USN-1.8/10-D5 DC/DC Power Converters
UST-12/250-D12 Single Output Ust Model, 3w, DC/DC Converters

ACA-20PC-2-XXX-XX : Segment Displays Digital Panel Meters

ADS-943G/883 : 3mhz, Low Power Sampling ADC: 14-bit

BWR-15/100-D12 : 12V 3W, Dual Output DC/DC Converter

BWR-15/575-D12A : DC/DC Power Converters

CPCI-510E : Boards->Data Acquisition

CPCI-562WINS : Boards->Data Acquisition

DMS-20PC-X-RS : Segment Displays

DTL22A :

UHR-3.3/4850-D12 : 12V 16-20W, Single Output DC/DC Converter

UHR-5/4000-D12 : 12V 16-20W, Single Output DC/DC Converter

UWR-5/3000-D12A : DC/DC Power Converters

Same catergory

ADP3188 : 6-Bit Programmable 2-/3-/4-Phase Synchronous Buck Controllerthe ADP3188 is a Highly Efficient Multiphase Synchronous Buck Switching Regulator Controller Optimized For Converting a 12 V Main Supply Into The Core Supply Voltage Required BY High Performance Intel Processors. It Uses an Internal 6-bit DAC to Read a Voltage Identification (VID) Code Directly.

BA6920FP-Y : . The an IC for small DC motor drive which has a wide operating voltage range. It has four output modes such as forward, reverse, stop and brake. When the motor is stopped, all circuits turn off automatically. A power save circuit that reduces current consumption and a power save terminal is included. This IC has 34V maximum operating voltage, so that.

CL432 : 1.25vprecision Adjustable Shunt Reference / Amplifier. Temperature-Compensated: 50ppm/ C Trimmed 0.5% Bandgap Reference Internal Amplifier with 150mA Capability Nominal Temperature Range Extended to 105oC Low Frequency Dynamic Output Impedance: < 150m Low Output Noise Calogic's a 3-terminal Adjustable Shunt Regulator highly accurate 1.25V bandgap reference with a 0.5% tolerance. The device offers thermal.

GP2540-7R : 120195 Watt DC-DC Converters. Input voltage to 4 isolated outputs 4242V DC I/O electric strength test voltage Extremely slim case (4 TE), fully enclosed Extremely low inrush current, hot swappable Operating ambient temperature range 4071C with convection cooling Output 1 Output 2 Output 3 Output 4 Uo nom Po nom Po max Uo nom Po nom Po max Uo nom Po nom Po max Uo nom Po nom Po max [V DC] [W] [V DC] [W] [V DC] [W] [V DC] [W] Type.

LM1117 : Positive Voltage->Adjustable. LM1117 - 800mA Low-dropout Linear Regulator, Package: to 252, Pin Nb=3.

LM169 : > 5V. Precision Voltage Reference (discontinued). The LM169 LM369 are precision monolithic temperaturecompensated voltage references They are based on a buried zener reference as pioneered in the LM199 references but do not require any heater as they rely on special temperature-compensation techniques (Patent Pending) The LM169 makes use of thin-film technology enhanced by the discrete laser trimming.

PT6882A : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT6882, 2.5Vout 5A 18-36V Input Adjustable Isr, cu Case.

S4242 : Sequencers Supervisory. Precision Voltage Supervisory Circuit With 4k I2C™ Memory.

SA56606-20 : CMOS System Reset. Product data Supersedes data of 2001 Apr 24 File under Integrated Circuits, Standard Analog 2001 Jun 19 The is a CMOS device designed to generate a reset signal for a variety of microprocessor and logic systems. Accurate reset signals are generated during momentary power interruptions or whenever power supply voltages sag to intolerable levels. An Open.

TPS2829DBV : MOSFET and Power Drivers. ti TPS2829, Non-inverting High-speed MOSFET Driver.

TPS70202 : Dual-output Low-dropout Voltage Regulators With Integrated SVS For Split Voltage Systems.

UC282-ADJ : Fast LDO Linear Regulator. Fast Transient Response to 3-A Load Current Short Circuit Protection Maximum Dropout at 3-A Load Current Separate Bias and VIN Pins Available in Adjustable or Fixed-Output Voltages 5-Pin Package Allows Kelvin Sensing of Load Voltage Reverse Current Protection The is a low-dropout-linear regulator providing a quick response to fast load changes. Combined.

NCP1338 : PWM Current Mode Controller For Free Running Quasi Resonant Operation The NCP1338 combines a true current mode modulator and a demagnetization detector which ensures full Borderline/Critical Conduction Mode in any load/line conditions together with minimum drain voltage switching (Quasi-Resonant operation). The transformer core reset detection is done.

LTC3589 : 8-Output Regulator With Sequencing And I2C The LTC3589 is a complete power management solution for ARM and ARM-based processors and advanced portable microprocessor systems. The device contains three synchronous step-down DC/DC converters for core, memory and SoC rails, a synchronous buck-boost regulator for I/O at 3.3V to 5V, and three 250mA LDO regulators.

XC6126 : Ultra Small, Highly Accurate, Single Voltage Detector The XC6126 series is an ultra small, highly accurate CMOS single voltage detector with very low power consumption. The device includes a highly accurate reference voltage source and uses laser trimming technologies, it maintains high accuracy over the full operation temperature range..

0-C     D-L     M-R     S-Z