|
Details, datasheet, quote on part number:6502
| |
| Part: | 6502 |
| Category: | Analog & Mixed-Signal Processing => Switches & Multiplexers => Analog Switches |
| Description: | RF Distribution |
| Company: | Symmetricom, Inc |
| Datasheet: | Download 6502 datasheet File size : 121 kB |
| Request For quote: | Find where to buy 6502
|
| |
Datasheet text preview:
Features Overview
Low Phase Noise High Channel Isolation Ten Channel Output Distribution Daisy Chain For More Than 100 Outputs
D I S T R I B U T I O N MODULES DISTRIBUTION MODULES
6502 RF Distribution Module
The DATUM 6502 Distribution Module is a ten channel, RF distribution amplifier packaged in a 1U rack mount chassis. It is comprised of ten low phase noise RF amplifiers that maintain high channel isolation (>100dB). Up to ten units can be daisy chained together to give up to 100 outputs or each output of one unit can be used as a source for other 6502 units to give almost infinite expansion capability with virtually no signal degradation.
The 6502 standard configuration accepts input frequencies from 0.1MHz to 10MHZ at 1Vrms amplitude and provides ten buffered outputs of the same frequency. Each output and input has an alarm indicator that warns of either a loss of signal or a signal of insufficient amplitude. The 6502 is also available in custom configurations. Please contact Datum - TT&M with any specific requirements.
6502 RF Distribution Module
Specifications
ELECTRICAL SPECIFICATIONS RF Output (ten)
Frequency Level Harmonic Distortion Non-Harmonic signals Load Impedance Isolation Connectors 0.1 to 10 MHz 1 V rms (nominal) 100 dB* BNC
D I S T R I B U T I O N MODULES D I S T R I B U T I O N MODULES
ENVIRONMENTAL & PHYSICAL SPECIFICATIONS Temperature (operating) Relative Humidity Power Requirements
AC Input (+/-15%) DC Input (optional) 120 or 230 V AC, <10W 20 to 70 V DC, 10W 0º to 55°C 0 to 95%, non-condensing
*Isolation between channels one to ten >130 dB
Dimensions
Height Width Depth 1U (~1.75 inches) 19 inches 12 inches <5 lbs.
Additive SSB Phase Noise
(1 Hz Bandwidth)Offset from carrier 1 Hz -120 dB 10 Hz -135 dB 100 Hz -145 dB 1,000 Hz -155 dB 10,000 Hz -160 dB
Weight Options
· Front mounted connectors
Option P/N
502
RF Input
Frequency Level 0.1 to 10 MHz 1 V rms (nominal)
Alarm Output
Summary alarm indicates failure of any output signal. Each Output & Main Non-alarm condition Red LED Relay energized (fail safe) C Form contacts Panel switch 9 pin D-male
Alarm O/P Disable Connector
Controls & Indicators
Power Alarm Alarm Override (optional for 6502B) Green LED, power is connected Red LED, signal output failure Toggle Switch: Up = Alarm Enabled Down = Alarm Disabled
Please note: If input level is less than 10dBm specify
low alarm threshold version (-509).
Specifications subject to change without notice. Specifications subject to change without notice.
Datum-TT&M · 34 Tozer Road · Beverly, MA 01915-5510 · Tel: +1-978-927-8220 · Fax; +1-978-927-4099
USA Toll Free: 1-800-544-0233 · Web: www.datum.com · E-mail: ttmsales@datum.com
Rev 4-02
|
|
