Details, datasheet, quote on part number: 5KP20CA
Description5000W Transient Voltage Suppressor
CompanyDiodes, Inc.
DatasheetDownload 5KP20CA datasheet
Cross ref.Similar parts: 1.5KE18CA, 1.5KE18CARL, 5KP20CA(R6)
Find where to buy


Features, Applications

5000W Peak Pulse Power Dissipation - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-directional Version Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-0

Case: 5KP/5KW, Transfer Molded Epoxy Terminals: Solderable per MIL-STD-202, Method 208 Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) Marking: Type Number Weight: 2.1 grams (approx.)

All Dimensions in mm "S" Suffix Designates 5KW Package No "S" Designates 5KP Package
= 25C unless otherwise specified Symbol PPK Value 5000 Unit W

Characteristic Peak Pulse Power Dissipation (Non repetitive current pulse derated above 25C) ( Note 1) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Notes Steady State Power Dissipation = 75C, Lead Lengths 9.5mm(Note 1) Instantaneous Forward Voltage @ IPP = 100A (Notes Operating and Storage Temperature Range

1. Valid provided that the terminals are maintained at a distance of 10mm from case 25C. 2. Measured with 8.3ms single half sine-wave. Duty cycle = 4 pulses per minute maximum. 3. Unidirectional units only.

4. Suffix C denotes Bi-directional device. 5. VBR measured with IT current pulse 300ms 6. For Bi-Directional devices having VRWM of 10V and under, the IR is doubled.

VRWM, REVERSE STANDOFF VOLTAGE (V) Fig. 2 Typical Junction Capacitance
TP, PULSE WIDTH (ms) Fig. 3 Pulse Derating Curve
Single Phase Half-Wave 60Hz Resistive or Inductive Load
X 1000 Waveform as defind by REA TA, AMBIENT TEMPERATURE (C) Fig. 4 Pulse Derating Curve


Related products with the same datasheet
Some Part number from the same manufacture Diodes, Inc.
5KP22A 5000W Transient Voltage Suppressor
5KP5.0S-180CA Transient Voltage Suppressor
5KP51A 5000W Transient Voltage Suppressor
5KPCSeries 5000w Transient Voltage Suppressor
6A01 6.0a Rectifier
6A08 6.0A Silicon Rectifier
6A1 Standard Rectifiers
6A10 6.0A Silicon Rectifier
6A2 Standard Rectifiers
ASMCC0096 Complex Arrays
AZ23C10 300mW Dual Surface Mount Zener Diode
AZ23C10W 200mW Dual Surface Mount Zener Diode
AZ23C11 300mW Dual Surface Mount Zener Diode
AZ23C18W 200mW Dual Surface Mount Zener Diode
AZ23C20 300mW Dual Surface Mount Zener Diode
AZ23C2V7-C51 300mw Dual Surface Mount Zener Diodes
AZ23C30 300mW Dual Surface Mount Zener Diode

B220 : 2.0A Surface Mount Schottky Barrier Rectifier

BZX84C6V2S : Dual 200mW Surface Mount Zener Diode

KBPC35005-KBPC3510 : 35A Bridge Rectifier

MMBTA06-7 : SOT/Surface Mount NPN Small Signal Surface Mount Transistor

AH1802-WG-7 : Magnetic - Hall Effect, Digital Switch, Linear, Compass (ICs) IC HALL SW OMNI 2.5-5.5V SC59-3 -; IC HALL SW OMNI 2.5-5.5V SC59-3 Specifications: Features: - ; Package / Case: TO-236-3, SC-59, SOT-23-3 ; Current - Output (Max): - ; Sensing Range: 40G Trip, 10G Release ; Operating Temperature: -40C ~ 85C ; Output Type: Digital, Open Drain ; Type: Omnipolar Switch ; Voltage - Supply: 2.5 V ~ 5.5 V ; Current - Supply: 6mA ; L

AP1121BSL-13 : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO 1.0A 3.3/1.8V 8-SOIC Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

74LVC2G07FW5-7 : Buffers & Line Drivers Dual Buffer -24mA 1.65V to 5.5V 100mA Diodes Incorporated 74LVC2G07 is a dual buffer gate with open drain outputs designed for operation with a power supply range of 1.65V to 5.5V. The input is tolerant to 5.5V enabling this device to be used in a mixed voltage environment. The 74LVC2G07 is fully specified for partial power down appl

BZT52HC12WF-7 : Zener Diodes 12.7V 375 mW AEC-Q101 Diodes Inc. BZT52HC2V4WF & BZT52HC47WF Zener Diodes are housed in a surface mount package and feature a flat lead design for a low profile. The BZT52HC2V4WF & BZT52HC47WF have high power dissipation and are AEC-Q101 qualified for use in automotive applications. The diodes are totally lead

0-C     D-L     M-R     S-Z