Details, datasheet, quote on part number: MR751
PartMR751
CategoryDiscrete
Description
CompanyDiotec Electronics Corporation
DatasheetDownload MR751 datasheet
Cross ref.Similar parts: ECG5812, GP600, GI751, MR75, MR751RL, MR754, P600B
Quote
Find where to buy
 
  

 

Features, Applications
18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958
FEATURES

Low forward voltage drop High current capacity Fast switching for high efficiency Color Band Denotes Cathode BL

Case: Molded epoxy (U/L Flammability Rating 94V-0) Terminals: Plated axial leads Soldering: Per MIL-STD 202 Method 208 guaranteed LD (Dia)

Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.07 Ounces (2.1 Grams)

Ratings 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive loads, derate current by 20%.

Series Number Maximum DC Blocking Voltage Maximum RMS Voltage Maximum Peak Recurrent Reverse Voltage Average Forward Rectified Current = 60 oC, Lead length = 0.375 in. (9.5 mm) Peak Forward Surge Current ( 8.3 mSec single half sine wave superimposed on rated load) Maximum Forward Voltage at 6 Amps DC Maximum Reverse Recovery Time IR=1A, IRR=0.25A) Maximum Average DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range

NOTES: (1) Lead length = 0.375 in. (9.5 mm) (2) Measured 1MHz & applied reverse voltage of 4 volts 300 nS avaiable - consult with factory

JEDEC Method 8.3 mS Single Half Sine Wave
300 Single Phase, Half wave, 60 Hz Resistive and Inductive Loads Lead Length 0.375" (9.5 mm) oC 200
Ambient Temperature, oC FIGURE 1. FORWARD CURRENT DERATING CURVE
Number of Cycles 60 Hz FIGURE 2. MAXIMUM NON-REPETITIVE SURGE CURRENT
Instantaneous Forward Voltage (Volts) FIGURE 3. TYPICAL FORWARD CHARACTERISTICS
Reverse Voltage, (Volts) FIGURE 4. TYPICAL JUNCTION CAPACITANCE

NOTES: (1) Rise time = 7nS max., input impedance = 1 Megohm, pF (2) Rise time = 10nS max., source impedance = 50 ohms

FIGURE 5. REVERSE RECOVERY TEST SETUP AND TIME CHARACTERISTIC

 

Related products with the same datasheet
FR502
FR503
FR504
FR505
FR506
FR507
FR601
FR601G
FR602
FR602G
FR603
FR603G
Some Part number from the same manufacture Diotec Electronics Corporation
MR752
MUR105
MUR140
MUR1505
MUR160
MUR1605CT
MUR170
MUR3005PT
MUR405
MUR605CT
MUR805
NST1020
NST1030
NST1045
NST1625
NST2525
NST3030
NST545
P1000A Silicon Rectifier
P1000B
P1000D
 
0-C     D-L     M-R     S-Z